MACH Force XP exhaust systems are constructed of 2-1/2 inch mandrel bent stainless steel tubing for maximum flow. Smooth transition bends allow for low turbulence, increasing horsepower, torque and improving throttle response. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The Bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time. A straight through designed, free-flowing stainless steel muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig.
Great sound... It's still a V6 but sounds louder for those that want to hear what they drive... It seems to have gave more power but that could be my head calming down my wallet... I also did a Airaid at the same time
I just put this on my 2010 JK. You have to bend down to the ground in order to see it compared to the stock one I replaced. Out of sight but not out of mind! It has a nice deep throaty tone that sounds like a JK should sound. Louder than stock but not to the point that it is annoying. Smaller, lighter and better sounding than stock. Added this to my tuner and definitely improves the feel of my Jeep.
It really sounds good and was really easy to install once I have the old exhaust off.
I was impressed by the beefy clamps, but all of the slip fittings leaked anyway. Was too long, had to be cut down 3/4". Did not fit with my tow hitch.
Great sound and noticeable performance, fits great and easy to install.
Added this AfE cat-back and was amazed how easy it was to install.. Once I got my old pipe and muffler off it took about 20 min to finish the project. Total time about an hour. The 3" pipe really makes it sound nice it has a deep tone with very little to no resonating sound that other systems have. There is an increase in HP with this unit. How much I'm not sure but it's noticeable. I also have CAI so putting the two together made a noticeable improvement..
I ordered this for my 1998 TJ, and after waiting for a month because of a backorder, it didn't fit. The 97-99 TJ's have a slip type connection at the catalytic converter, and the 00 and up have a flange fitting. AFE's 2.5 may of worked, but if they overlooked this then someone else will be getting my money. If you're looking at cat backs, and the brand doesn't have a specific part number for the 97-99, but instead has one part number for 97-06, stay away or at least inquire about it. I've wasted well over a month dealing with this.
Hey ya , does this system fit a 2015 jeep Wrangler willys wheeler 2 door with the 3.6 L engine ? It's telling me that it will not fit . Thank you .
Asked by Scotty Rotten from Some where , Maryland on
Scotty Rotten, the Afe MachForce XP Hi-Tuck Cat-Back Exhaust System will only fit the 3.6L 2 doors, so this will work with your 2015 without issue. I hope this helps!
Answered by Sara H. Ext 4874 from Some where , Maryland on
What Y-Pipe goes with this exhaust system and will i need a loop delete to go with it?
Asked by aascog from on
Hello, The Afe MACHForce XP Hi-Tuck Cat-Back Exhaust System does not require the y-pipe and the loop delete is only needed for long arm lifts. Please let us know if you have any other questions. Thanks!
Answered by Tom S @ Ext 4876 from on
What adaptor I would have to use so that I don't have to cut or weld anything to go from 2.5 inch to 3inch
Asked by anonymous from on
Hello, You will need a 2.5 to 3 inch adapter. You may have to get it at an exhaust shop or local parts store. If you have anymore questions feel free to ask, Thank you.
Answered by JordanC extension4833 from on
Accel Super Tune Up Kit With Spark Plugs
For over 15 years, Corona, California-based aFe (advanced FLOW engineering) has manufactured high performance exhaust systems, cold air intakes, intake manifolds, turbochargers and more for trucks, Jeeps and SUVs. With an imposing product line of 2,500+ applications, the company CNC machines, CAD designs, 3D scans and tests its innovative systems and components in house. This ensures that off-roaders experience increases in horsepower, engine efficiencies and fuel mileage. Additionally, aFe's lineup of air and fluid filters keeps emissions compliant and the air in your 4x4 clean while tuners and programmers aid in towing performance. Shop Afe Power Now