4WD Hardware Billet Distributors main body is machined from a single piece of high strength aircraft quality aluminum and stuffed full of top shelf electronics to provide you with a strong and reliable ignition system.
This was the perfect setup for our old cj-5 golden eagle. Installed in a little over 2 hours with refreshments and was an immediate improvement over the old Smithsonian distributor. Would recommend this to any one with a distributor your a little unsure is getting the job done.
Anyone wanting more power and reliability for a few $$ and a short install time needs this conversion. The hardest part was giving the underhood wiring a "diet". Very easy install...best value out there!
Hello, I have a 73 cj5 with a 304 v8, I want to order the HEI Billet Distributor and I need the part number for the correct plug wires and the power lead. Do I need special plugs as well? Thanks ,Brian
Asked by Brian from wyoming on
Hi Brian The HEI Billet Distributor will work great, the power lead is PWP30809 and the wires would be UIWHEI9076R. I found Auto Light plugs have always worked better on the AMC engines and will allow you to gap them 50-55 thousandths. Thanks
Answered by LWiff ext 4804 from wyoming on
Hello, i want to order the Billet electronic ignition distributor and i need to now what all i need as far as plugs, wires and power lead.I have a 73 cj5 with the 304 v8. this will be the third time in about 2 weeks or so that i have submitted this question and so far i have had no response. If you could help me out that would be great.Thanks.
Asked by beeman from Wyoming on
Hello Beeman, With the Hei Distributor the only parts you will need is UIW9519K this includes the wires with the distributor. Also you will need a power lead and that part number is PWP30809. If you have anymore questions feel free to ask, Thank you.
Answered by [email protected] from Wyoming on
I have a CJ7 w/304 and points distributor. I want to change the distributor out for an HEI-type like the HEI Billet. Will this work? If so, do I need to change the plug wires and existing coil also?
Asked by Don from on
Hi Don to run the 4Wheel Drive Hardware HEI Billet Distributor you can not run stock wires. You will have to get the live wire kit and a power lead wire. if you ahve any other questions feel free to ask. thanks,
Answered by roy p ext 4928 from on
Headquartered in Columbiana, Ohio, 4Wheel Drive Hardware (4WD) was established in 1977 as a distributor of high-quality Jeep parts and accessories. With a passion for jeeping, the company is fully immersed in the Jeep lifestyle and caters to the needs of casual weekend warriors and hardcore enthusiasts. 4 Wheel Parts carries a wide variety of 4WD's product line including distributors, beverage accessories, fire extinguishers, and winches and winch accessories. Their Columbiana store or one of 4 Wheel Parts 75 stores across North America are a go-to resource with ASE-certified technicians who install every part they sell. Shop 4Wheel Drive Hardware Now