Up To 20% Off For A Limited Time | Shop Now
Get back the power and fuel economy you lost after installing larger tires with a performance ring and pinion package from G/2 Axle and Gear. G/2 gear packages include a front and rear ring and pinions with master installation kits for both axles. The master installation kits include carrier bearings, carrier shims, pinion bearings, pinion shims and/or crush sleeves, ring gear bolts, cover gasket, pinion oil seal, pinion nut, and gear marking compound. Please note: depending on your current gear ratio, you may need to purchase new carriers for one or both of your axles.
What carrier is need for this ring set?
Asked by Aml from Richmond va. on
Aml, The 4Wheel Drive Hardware G/2 CJ 4.10 Performance Ring and Pinion Package will require a 3:08 and up carrier for the front and a 3:73 and up carrier for the front. Please let us know if you have any other questions. Thanks!
Answered by Tom S @ Ext 4876 from Richmond va. on
I have a rubicon 2012 jk with 4.10 gears am I correct in assuming g I DONT need additional carriers?
Asked by Mauro from on
Mauro, You do not need carriers for your Jeep to install this package. Please let us know if you have any other questions. Thanks!
Answered by Tom S. Ext. 4876 from on
Headquartered in Columbiana, Ohio, 4Wheel Drive Hardware (4WD) was established in 1977 as a distributor of high-quality Jeep parts and accessories. With a passion for jeeping, the company is fully immersed in the Jeep lifestyle and caters to the needs of casual weekend warriors and hardcore enthusiasts. 4 Wheel Parts carries a wide variety of 4WD's product line including distributors, beverage accessories, fire extinguishers, and winches and winch accessories. Their Columbiana store or one of 4 Wheel Parts 75 stores across North America are a go-to resource with ASE-certified technicians who install every part they sell. Shop 4Wheel Drive Hardware Now