2016 JEEP WRANGLER JK  - Daystar 4 Inch Suspension Lift Kit - KJ09156BK - KJ09156BK| 4WD.com
FREE SHIPPING on Orders Over $50*

2016 JEEP WRANGLER JK  - Daystar 4 Inch Suspension Lift Kit - KJ09156BK - KJ09156BK

Daystar 4 Inch Suspension Lift Kit - KJ09156BK

Daystar | Part Number: DAYKJ09156BK


  • Shocks Included: Shocks Included
  • Suspension Type: Spacer
  • Rear Lift Method: Spacers
  • Fitment: Direct Fit
  • In_Stock: In Stock
  • In_Stock: In Stock
  • Lift Height Range: 3 to 4.99 Inches


  • 07-Current Wrangler JK, 2 & 4 Door
  • Automatic transmission
  • Front and rear
  • Kit contains 3'' coil spacers and 1'' body lift
  • Shocks included
  • Comfortride suspension coil spring spacer kit
  • Max Tire Size: 37x12.50


  • Daystar Lift Kits work within the factory suspension design, meaning that we work within the factory's design parameters to achieve an increase in ride height. Because we work within the factory design, there are not a bunch additional modifications involved that adds complexity and expense to the kit. Everything needed is included in the kit
  • there's everything you need and nothing you don't. If there are extra items required, such as longer shocks, its clearly stated in the application description. Shocks included.


Question & Answers

3 Answered questions

I'm wanting to install this lift on a 2007 unlimited Rubicon. Is there any issues running 37's with this setup, any specific tire & wheel combo that must be used? Any picture of this lift running 37's? Or would I be better off using a 4" Trail Master lift and a 1" Daystar body lift to accommodate 37's?

Asked by Adam from Louisiana on

Adam, the Daystar 4 Inch Suspension Lift Kit will allow for 37's with aftermarket wheels. I would personally recommend getting an actual spring lift over the spacers. a 3" spacer is bigger than what I would advise for that type of lift. Hope this helps!

Answered by Zach O. ext 4939 from Louisiana on

when installing this lift on my 2015 wrangler rubicon unlimited will the pitch of the height effect the universal joints to wear quicker?

Asked by keefer from brookhaven pa on

Hi Keefer, This Daystar 4 Inch Suspension Lift Kit includes the 3" coil spacers to raise the springs, and usually the drivetrain is not affected unless you go over 4" of suspension lift. The body lift included is 1" which won't affect your driveshaft angles. Thanks for your inquiry.

Answered by Jim G Ext 4806 from brookhaven pa on

i have a question reguarding the 4 inch daystar lift does the engine need to be adjusted to the angle of the driveshaft so the u joints dont break

Asked by keefer from brookhaven pa on

Hello keefer, The Daystar 4 Inch Suspension Lift Kit will not require any engine modification. If you have a vibration or are worried about driveline angles you can remedy it using adjustable upper control ares. this will let you tilt the pinion up. Thanks for the inquiry.

Answered by Adam from brookhaven pa on


Driven by design, Daystar has been designing and producing premium 4x4 components for nearly 40 years. Primary products for Jeeps include lift and leveling kits, dash panels and hood accessories and Daystar manufactures parts and accessories for Wranglers, Cherokees and Liberties. When factory parts are not up to par, upgrade to Daystar's line of unrivaled, ISO-certified plastic products for a variety of applications. We carry switches, isolators, bump stops and more so improve performance on the trail and for your everyday driving. When you've got the guts to go off-road, Daystar products help make your ride a revelation with unrivaled products. Shop Daystar Now