This drop pitman arm helps reduce the angle of your drag link and reduce bumpsteer created when a suspension lift is installed.
If I replace the drag link with an inverted one,do I need this droped pitman arm or just a stock one if I need the droped one do I have to drill out the new arm to 13/16. THANKS MORRIE
Asked by MORRIE from on
Morrie, the Rugged Ridge Drop Pitman Arm will not be needed with a high steer kit. Since you will use the stock pitman arm, you do not need to worry about drilling anything. I hope this helps!
Answered by Sara H. Ext 4874 from on