This economy version is a simple 4 spacer kit. Part #30820 is the same kit, but it adds on a set of our 60.5mm Warrior Shocks. Note that the front is a 2.5" spacer, while the rear is a 2" spacer, to level the stance of the Jeep.
i am picking up some 35's tonight and i need to know that without a doubt if i purchase these and install them i will be able to clear 35's without needing any other hardware or parts. On quadratec's website it says this about the same part... To clear the 35" tire an aftermarket wheel with a different offset or wheel spacers will be needed. Can you please explain what this means and if i need something else to ensure proper clearance while staying on budget please let me know
Asked by chris from jville, nc on
Chris, Let’s start from the beginning, this kit will allow you to run 35" tires on your JK. But I am going to assume from your question that you are planning to run the factory wheels. This is doable, but know that they may rub when you turn the wheels. This is a concern because you are adding a much wider tire onto a wheel that was designed for a narrower tire. Think about the width difference from your stock tire to the new 35” tire and you will see the concerns. Again this is doable but I wouldn’t suggest it, I would highly suggest either aftermarket wheels or wheel spacers because in the end you will truly be happier. Wheel spacers are the cheaper option and will help you stay on budget, check these out they are sold as a pair so you would need 2 pairs. http://www.4wd.com/Jeep-Wheels-Jeep-Wheel-Accessories/Wheel-Spacers-by-Spidertrax-for-Jeep.aspx?t_c=11&t_s=107&t_pt=7576&t_pn=SPIWHS-010 I hope this was helpful and we look forward to helping you in the future. Thanks.
Answered by Jamey from jville, nc on