We Pay Your Sales Tax THIS WEEKEND ONLY!

2010 JEEP WRANGLER JK  - Rock Hard 4x4 Parts Full Width Front Bumper with Recessed Winch Mount (Black) - RH-5005 - RH5005

Rock Hard 4x4 Parts Full Width Front Bumper with Recessed Winch Mount (Black) - RH5005

Rock Hard 4x4 Parts | Part Number: RFPRH-5005

Specifications

  • D-Ring Mount Included: D-ring Mount Included
  • Width: Full
  • Light Mounts Included: Light Mounts Included
  • Winch Mount Included: Winch Mount Included
  • Fitment: Direct Fit
  • Finish: Powder Coat
  • In_Stock: In Stock
  • In_Stock: In Stock
  • Material: Steel

    TECHNICAL DETAILS

  • 2 and 4-door models
  • Black powdercoated
  • Lowered section for winch
  • Reuses factory fog lights
  • Made in the U.S.A

PRODUCT OVERVIEW

This Rock Hard 4x4 top of the line full width front bumper is made from 1/4 inch CNC laser cut and bent steel for consistent quality. Tapers down and back to protect the factory lower cross frame and sway-bar disconnect unit (if equipped). Provides the best possible approach angle without cutting the factory frame. The winch is mounted low in the bumper without affecting air flow. This bumper provides full width protection. Recessed factory fog light mountings brackets are provided. Designed to accommodate the largest winches on the market, even the Warn Power Plant. * 2012 to 2013 JKs require a vacuum pump relocation kit #RFPRH5011.

Reviews

3.7
3.7 3.7
1.0
Sure it fits, but it's garbage

Sure it bolted right up, the factory lights went right in after extending the wires, np. But after three days the bumper had rust showing through.And it didn't even rain! Went to put my winch in, a warn X9000i, and it didn't fit. Not even close. This bumper has me so fed up, I want to donate to some fisherman to use as an anchor


from L:I,N.Y. |
5.0
Perfect fit

Bolted right up. Protects the sway bar disconnect without adding a skid plate. The Warn Power Plant fits, just barely but it does fit.


from Utah |
5.0
Fits the bill nicely

The pictures do not do this bumper justice, This bumper extends down and wraps under the crash bar, with others you have to buy the skid plate and light bar extra. Can add the winch without removing the bumper. Can be done by yourself but a helper made this job a snap, 8 bolts off and on less than 1 hour (my impact helped!). Its heaver than the factory bumper but made the ride better. [...]they loaded it right up for me, Thanks 4WD!Now where is the mud again?


from Cleveland, OH |

Question & Answers

8 Answered questions

I have a 2015 4 door Rubicon. Is this a straight bolt on without need for vacuum pump relocation bracket? Can the factory fog lamps be mounted without any kind of adapting and is the wiring to the lights long enough without having to lengthen the wires or cut open the wire harness to get a little extra length?

Asked by Stevie Jim from Athens, TX on

Hey Stevie, the Rock Hard 4x4 Parts Full Width Front Bumper with Recessed Winch Mount would be a direct bolt on and there should be no need to extend any wiring. Thanks for your question.

Answered by Devin B. ext 4835 from Athens, TX on

I have a 2015 4 door Rubicon. Is this a straight bolt on without need for vacuum pump relocation bracket? Can the factory fog lamps be mounted without any kind of adapting and is the wiring to the lights long enough without having to lengthen the wires or cut open the wire harness to get a little extra length?

Asked by Stevie Jim from Athens, TX on

Hey Stevie, the Rock Hard 4x4 Parts Full Width Front Bumper with Recessed Winch Mount would be a direct bolt on and there should be no need to extend any wiring. Thanks for your question.

Answered by Devin B. ext 4835 from Athens, TX on

The specs state the color as black but doesn't state the finish, gloss,flat, textured, etc. What is the color finish on this bumper? Thanks

Asked by TWFDC4 from United States on

Hi TWFDC4, The Rock Hard 4x4 bumpers come in a dull, textured black powder coat finish, not a high gloss. Thank you for the inquiry.

Answered by Jim G from United States on

See all questions & answers

Manufacturer

The concept for Nebraska-based Rock Hard 4x4 Parts was hatched back in the 1980s and evolved from DIY cage installation to a full-service manufacturing facility. Employing state-of-the-art CNC machining centers, outstanding craftsmanship and laser cut precision, Rock Hard takes the bolt-in design of bumpers, skid plates, cages and sliders to the next level. Their patented locking collar distinguishes itself in the aftermarket industry and all of their exterior products make off-roading in Jeeps safer and smoother. Protection is paramount on the trail and Rock Hard's products are easy to install, affordable and exude superior style. Shop Rock Hard 4x4 Parts Now

Promotions

CHAT