2010 JEEP WRANGLER JK  - RIPP Superchargers 3.8L Supercharger Kit - 0711JKSDS2 - 0711JKSDS2| 4WD.com
FREE SHIPPING on Orders Over $50*

2010 JEEP WRANGLER JK  - RIPP Superchargers 3.8L Supercharger Kit - 0711JKSDS2 - 0711JKSDS2

RIPP Superchargers 3.8L Supercharger Kit - 0711JKSDS2

RIPP Superchargers | Part Number: R/M0711JKSDS2


  • Fitment: Direct Fit


  • 07-11 Wrangler JK, 2 & 4 Door
  • 3.8L 6 cylinder engine
  • RIPP SDS (Supercharger Drive System) 6061 aluminum CNC design
  • V3 Si-Trim Stage 2 Intercooler
  • DiabloSport I-1000 fuel and timing controller
  • RIPP plug and play *MAP Sensor* for exact ECU boost communication
  • Vortech V3 Si-Trim supercharger self contained with (VSQ Option)
  • By-Pass valve
  • RIPP plug and play injectors
  • Front mount air to air intercooler
  • 2.75� 6061 mandrel aluminum piping
  • 50 State Legal Legal for use in California
  • CARB EO Number D-705


Initial testing has found that in stock form the 3.8L only produces as little as 133 Wheel Horse Power (WHP) on stock wheels/tires and gears and as little as 108-123whp on up rated 35" tires. With the addition of a RIPP Supercharger and running through stock exhaust manifolds, cats and exhaust, the 3.8l produces 240-/+ Rear Wheel HP (WHP) on stock wheels/tires and gears at 8psi. More over an impressive 240+whp and 260+lb/ft of torque on commonly used 35" wheels and tires. (HP levels vary depending on tire and gear combination as rotational mass comes into play, this effects both Naturally Aspirated (NA) and Forced Induction (FI) total output). Four ply silicon hose - Black. RIPP PCV valve. All hardware and clamps included. Illustrated instructions and tech tips. 1 year warranty.


Question & Answers

2 Answered questions


Asked by Gregory from TUSCUMBIA, AL on

Gregory, The RIPP Superchargers 3.8L Supercharger Kit will increase power to the rear wheels to approximately 240 WHP. Please let us know if you have any other questions. Thanks!

Answered by Tom S @ Ext 4876 from TUSCUMBIA, AL on

I have a 2011 Jeep Wrangler Sahara 2 door with a 2.5 inch Rubicon Spacer Lift and a Traildash Superchips device. Will this product work with the Traildash or would I have to put it back into the Stock mode and use the equipment that comes with this product?

Asked by Chell from Wyoming on

Chell, the RIPP Superchargers 3.8L Supercharger Kit requires the use of the included Diablo tuner. Hope this helps!

Answered by Zach O. ext 4939 from Wyoming on