"The 3/16" (.188" thick) top plate and bottom plate provide far superior protection against dents and bends than the stock cross member, which is made of a piece of 1/8" (.125" thick) and 14-gauge (.083" thick) stamped sheet metal. Incredibly, the Chrysler engineers decided to put the much thinner 14-gauge piece along the bottom, making it crumple at the mere sight of rocks. The steel used in the Poison Spyder cross member is 33% thicker on the top plate, and 2-1/2 times thicker on the bottom plate. And the 3/16" steel plate of the Poison Spyder Extreme Duty Cross member has brake-formed corners all the way around-there are no welds on the box corners. Inside the cross member, Poison Spyder fabricators have welded in four DOM tubing spacers to provide crush-proof strength at the cross member mounting bolt locations. These are made of .120" wall DOM tubing. Compare that to the stock cross member, which uses stamped sheet metal spacers. The Poison Spyder Extreme Duty Cross member matches the external dimensions and bolt locations of the stock cross member. All stock skid plates that were attached to the stock cross member attach to the Poison Spyder Extreme Duty cross member. Any other manufacturers aftermarket skid plate system that attached to the stock cross member should still attach to the Poison Spyder Extreme Duty Crossmember. The Poison Spyder Extreme Duty Crossmember is shipped as bare steel, ready for you to paint or powder coat in the color of your choice. This part number is for year model 2007-2011 JKs, both 2-door and 4-door, with either manual or automatic transmission."
Poison Spyder Customs has a heritage in hardcore off-road accessories that started when founder Larry McRae was little. McrRae's daddy use to load him up in the Ford Bronco to explore the off-road trails of the southwest. McRae became a professional rock crawler who raced for Nelson & Nelson Racing in the early 2000s. McRae purchased PSC from the Slay family and kept the vision of developing and fabricating high end quality off-road accessories right in the Pomona, California headquarters . McCrae and his wife are members of the Inland Empire 4 Wheel Drive club. McCrae himself is a Past President and Mrs. McCrae is a past Treasurer. Every product produced by PSC starts as a prototype tested on real trails by members of the club. Shop Poison Spyder Customs Now
We Pay the Sales Tax on All Poison Spyder Products