Pro Comp Suspension�s new U-joint style drive shaft�s are the perfect upgrade for 2007 - 2008 Jeep JK 4WD vehicles with 2� or more of lift. When lifted, the driveline angles are increased, which increases the potential for driveline vibration. Pro Comp U-joint style drive shaft�s will allow for vehicle operation in 4WD at speeds above 25 mph. The factory drive shaft ball and cage design joint is replaced with #1310 style u-joints to allow for a stronger engagement, increase the range of motion, and improve seal and driveline life. Exclusive yokes, not flange adapters, are used to allow for a longer drive shaft, unlike our competitors versions. Pro Comp Suspension front drive shaft�s are constructed from 2.00� x 0.120� DOM (drawn-over-mandrel) steel tube. Kits come complete with necessary mounting hardware.
Does this drive shaft come with the necessary bolts and U-Joint or are you supposed to re-use the factory bolts/U-Joint?
Asked by Gabe from Bloomfield, NJ on
Hey Gabe, the Pro Comp Suspension Non-CV Style Front Drive Shaft does come with new u joints but you do reuse the factory attaching bolts. Thanks for your question.
Answered by Devin B. ext 4835 from Bloomfield, NJ on
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now
Instant 10% Off