2008 JEEP WRANGLER JK  - Rugged Ridge 4 to 5 Inch ORV Suspension Lift Kit - 18415.6 - 18415.60 | 4WD.com
FREE SHIPPING on Orders Over $50*

2008 JEEP WRANGLER JK  - Rugged Ridge 4 to 5 Inch ORV Suspension Lift Kit - 18415.6 - 18415.60

Rugged Ridge 4 to 5 Inch ORV Suspension Lift Kit - 18415.60


  • Rugged Ridge | Part Number: RUG18415.60
  • Shocks Included:Does Not Include Shocks
  • Suspension Type:Short Arm
  • Rear Lift Method:Coil Springs
  • Fitment:Direct Fit
  • In_Stock:In Stock
  • In_Stock:In Stock
  • Lift Height Range:3 to 4.99 Inches


Includes 4 powder coated, E-coated 5170H hot rolled bar 5/8 inch coil springs, set to factory rates for longer life and better ride! Each kit includes a rear track bar brace to strengthen the original track bar mount. Kit includes sway bar disconnects for more articulation off road Each kit includes a rear track bar brace to strengthen the original track bar mount ORV uses tough, over built extended control arms for added strength and performance. In most cases control arms are longer than factory to adjust for caster. 4-Door JK's will get on average a 4 inch lift. Two door models will get up to a 5 inch lift. Due to the changed pinion angle, we highly recommend a new drive shaft be installed when using any 4 inch or greater lift kit on a 4-Door Wrangler. A new drive shaft will be required on any 2007-12 2-Door Wrangler due to the shorter wheel base. All 4 inch Kits require a drop pitman arm. (Sold separately: Part number 18006.55).


Looks Nice

Product is Great, ...Once installed. When i first ordered this lift it was shipped and received Super Fast...Kind of. I received 4 rear control arms, and ZERO front control arms. I verified with tech support that all the control arms were the correct ones...or so i thought..(this is my first lift i installed), so incorrect help there. So i had my control arms, shocks, and springs painted. Upon going to install the lift kit i realized that there was no way they could fit, now it is absolutely obvious. I then tried to have them exchanged, & since they were painted they did not exchange them even though tech support said i had the right parts. Upon purchasing another brands control arms i was ready to install the kit. I finally installed the kit; it took me ~26 Hrs of labor. There were many small issues that could have saved many hours, for example: no front stabilized link bushings were included, zerk fittings are compression fittings that will be damaged before they are able to be inserted, a lot of extra drilling that is not mentioned is required, shock mount bushings for one rear shock were not included, when lifting and dropping out the shocks be careful of brake lines (if i didn't catch it in time i'm sure they would have been snapped), no mention of the e-brake line relocator (recommend doing that when the rear suspension components are removed), that is what i can really think of now. This is my first disappointment from this company. The Good things are: It looks great, the 4"-5" of lift is a promise, the Paint is very good enamel paint, Components are rugged, It is compatible with all other brand products, and their company always ships super fast. Overall = borderline acceptable, all things considered.

from Camden County, Georgia |

Question & Answers

0 Answered question


Rugged Ridge was established in 2005 by the company Omix-ADA to focus on innovative aftermarket Jeep accessories. Many of Rugged Ridge's recent designs are so innovative they have been patented. This includes their floor liners, snorkel and XHD Modular Bumpers. Since 2005 Rugged Ridge has developed and manufactured over 3,000 kinds of Jeep related products. All Rugged Ridge Jeep accessories are trail rated. The Omix-ADA founder came from a family that owned a small Jeep dealership. It was the founder's dream from a young age to own a company that made accessories for Jeeps. The founder manifested the dream in 1992. Shop Rugged Ridge Now


Save 10% Instantly On Select Rugged Ridge Products

Print Form Download