FREE SHIPPING on Orders Over $50*

2008 JEEP WRANGLER JK  - Rock Hard 4x4 Parts JK Factory Bumper Winch Plate (Black) - RH-5010 - RH5010

Rock Hard 4x4 Parts JK Factory Bumper Winch Plate (Black) - RH5010

Rock Hard 4x4 Parts | Part Number: RFPRH-5010

Specifications

  • In_Stock: In Stock
  • In_Stock: In Stock

    TECHNICAL DETAILS

  • 2 and 4-door models
  • 100% bolt on for the factory plastic bumper
  • No cutting to install
  • Does not require relocation of the vacuum pump

PRODUCT OVERVIEW

Rock Hard 4x4s winch plate is designed to be used with the factory bumper on your JK Wrangler. The best part about this winch mount is that it requires no cutting to install, this is a bolt on winch mount. Note: this winch plate will not work on the 2013 Rubicon 10th Anniversary Edition because of the factory supplied front bumper.

Reviews

4.7
4.7 4.7
5.0
AWESOME purchase!!!

I wanted to put a winch on my 2015 Rubicon but didn't want to lose the factory bumper. This was just what the doctor ordered. Set aside a whole day to mount this and your winch. The only drawback I had was that one of the supplied bolts was pretty near impossible to get threaded. I spent probably two (2) hours just on that one bolt. At some point, just as I was about to give up, it started. I don't know what the problem was, but I know I will never take it off. I got the look and functionality that I was looking for.


from Garner NC |
4.0
Great Product!

The install was straight forward and easy. Some items were hard to get at but doable. The only issue I had was one of the supplied bolts was too short. On the drivers side, the is an extra piece of steel welded on the frame from the factory and the supplied bolt hit the lock washer before any threads caught. Having the bumper off I wasn't able to run to the hardware store so I omitted the lock washer and used loctite on the threads. I've read this complaint before so hopefully the manufacturer will pick up on this and supply a proper sized bolt. The plate uses the factory tow hooks. There is still some room to use them but I'm not sure if it will be enough. Otherwise this is a great product for those who want to mount a winch on the stock JK bumper.


from Dayville, CT |
4.0
Install was very simple

High quality item for the low cost. Will do the job, once the winch is attached?


from Strong, ME |
5.0
Awesome

Very useful, no need to change the bumper. Fair price, easy to install.


from Phoenix, AZ |
5.0
Perfect Fit

A perfect way to add a winch without having to change out the front bumper. Took about 2 hours for the mechanic to install and that included having to remove/reinstall aftermarket sway bar skid plate.


from Willamette Valley, OR |
5.0
Easiest install!

I installed the plate on a 2013 Jeep Wrangler. The product required no drilling. I had to remove the front bumper which was very simple to do. I installed a Champion winch I purchased from Sams. The plate holes and winch holes matched perfectly.


from Arkansas |
5.0
Great Product - Easy to Install

Great product, it fit perfectly. Very easy bolt on winch plate. It looks great installed.


from Idaho |

Question & Answers

22 Answered questions

Are the factory tow hooks still usable with this winch plate? 2008 rubicon

Asked by Craig from on

Hello Craig, You will not be able to use the factory tow hooks with the Rock Hard Winch Plate. If you have anymore questions feel free to ask, Thank you.

Answered by [email protected] from on

I have a 2014 wrangler Sport ,Was looking at a champion winch 10,000 LB from Sams Club. Will it work with the winch plate Thanks Dan

Asked by Dan from OHIO on

Hi Dan, This Rock Hard 4x4 Parts JK Factory Bumper Winch Plate utilizes the standard10.0" by 4.50" mount pattern that virtually all winches use, we don't offer the Champion but it most likely uses the same pattern as other brands. Great questions, thanks for your inquiry.

Answered by Jim G Ext 4806 from OHIO on

what is the shipping weight and package dimensions? thanks.

Asked by gunner from wasilla AK on

Hi Gunner The JK Factory Bumper Winch Plate box is 33 long, 14 wide 13 high and weighs 30 pounds. Thanks

Answered by LWiff ext 4804 from wasilla AK on

See all questions & answers

Manufacturer

The concept for Nebraska-based Rock Hard 4x4 Parts was hatched back in the 1980s and evolved from DIY cage installation to a full-service manufacturing facility. Employing state-of-the-art CNC machining centers, outstanding craftsmanship and laser cut precision, Rock Hard takes the bolt-in design of bumpers, skid plates, cages and sliders to the next level. Their patented locking collar distinguishes itself in the aftermarket industry and all of their exterior products make off-roading in Jeeps safer and smoother. Protection is paramount on the trail and Rock Hard's products are easy to install, affordable and exude superior style. Shop Rock Hard 4x4 Parts Now

Promotions