Pro Comp Suspensions new U-joint style drive shafts are the perfect upgrade for 2007 - 2008 Jeep JK 4WD vehicles with 2inches or more of lift. When lifted, the driveline angles are increased, which increases the potential for driveline vibration. Pro Comp U-joint style drive shafts will allow for vehicle operation in 4WD at speeds above 25 mph. The factory drive shaft ball and cage design joint is replaced with #1310 style u-joints to allow for a stronger engagement, increase the range of motion, and improve seal and driveline life. Exclusive yokes, not flange adapters, are used to allow for a longer drive shaft, unlike our competitors versions. Pro Comp Suspension rear drive shafts are constructed from 3.00in. x 0.095in. DOM (drawn-over-mandrel) steel. Kits come complete with necessary mounting hardware.
Pro Comp Suspension has spent the last two-and-a-half decades engineering, testing and manufacturing products that will give Jeep drivers the confidence to dominate whatever terrain is ahead. The Pro Comp Promise Life Time Warranty is forever. Pro Comp's warranty goes with the suspension products on Jeeps whether or not the Jeep owner is the person who originally purchased the product. Pro Comp Suspension can afford to give such a warranty because the products are produced at the Pro Comp facility in San Diego, California under exacting manufacturing standards. Pro Comp Suspension is the only suspension company with products that are tested under true driving conditions on outside roads, rather than simulated testing. Shop Pro Comp Suspension Now
We Pay Your Sales Tax on Pro Comp Products