2004 GMC SIERRA 2500  - Rancho RS5000 Steering Stabilizer Cylinder - RS5407 - RS5407 | 4WD.com
FREE SHIPPING on Orders Over $50*

2004 GMC SIERRA 2500  - Rancho RS5000 Steering Stabilizer Cylinder - RS5407 - RS5407

Rancho RS5000 Steering Stabilizer Cylinder - RS5407

Rancho | Part Number: RANRS5407

Specifications

  • Shock Boot Included: Red Shock Boot Included
  • Single / Dual: Single
  • Position: Front
  • Fitment: Direct Fit
  • Type: Stabilizer Only
  • In_Stock: In Stock
  • Series: RS5000 Series
  • Brackets Included: Brackets Not Included
  • In_Stock: In Stock

    TECHNICAL DETAILS

  • 87-Current Wrangler, 2 & 4 Door
  • JK models need bracket part number RANRS5510
  • Extended length is 19-3/4"
  • Collapsed length is 12"
  • Ten-stage velocity sensitive valving
  • Twin tube cellular gas design
  • Double eyelet design
  • 1-3/8" diameter piston (on most applications)
  • 5/8-in. (16 mm) and 1/2-in. (12 mm) rods changing from chrome to nitro-carburized coating.Limited lifetime warranty

PRODUCT OVERVIEW

Rancho steering stabilizers are designed to improve vehicle control by reducing steering shimmy and driver fatigue. Stabilizers enable you to help protect your front-end suspension components and reduce tire wear. Stabilizer is standard eyelet style (eye holes on both ends). Shock boot has factory cut slots at the bottom and black bushings are painted white by Rancho. Extended length is 19-3/4 and collapsed length is 12. Kit includes: 1 stud, 2 washers, 2 nuts, 1 cotter pin, 1 sleeve, 1 red boot and zip tie.

Reviews

4.5
4.5 4.5
5.0
replace stock stablizer

easy to install improves steering.. must have with 31x10.50


from Upstate NY |
4.0
Steering Dampener

Great product, ordered it because I got a 4.25" lift and 33' mud tires and it rides better than stock. the dampener is almost twice the size of the factory one.


from New Orleans, Louisiana |
5.0
works great

it fits great, needed to replace stock one. the price was good and it looks good.


from brentwood,ca |
4.0
Good Part

Works well, came with good instructions, and easy to install


from Idaho Falls, ID |
4.0
good replacement part for normal use

Easy install you need a steering knuckle removal tool to remove ome damper and bbaster once you get the tapperd stud out it's an easy replacement. Check you tube for information.


from southern Colorado |
5.0
Easy install

Only took less than hour to install on my 2004 tj


from Hoquiam, Wa. |
5.0
TJ Steering Damper

Replacing the steering damper was a great thing. I get a better ride out of my TJ with the Rancho damper which insulates the driver's wheel effectively. Much better ride with a smoother 'feel'. The only difficult part of the install was the removal of the OEM damper with it's tapered bolt. It took three cycles of applying heat to break the bolt free. The install was easy after that...good fit with the correct hardware supplied too...


from Deep South |
4.0
Great product

Me and my brother put this on in my driveway in about 20 minutes. Running 33s i get alot of vibration and pull but wit the stabilizer on it rides so much better.


from Greenville, SC |

Question & Answers

7 Answered questions

Is Part Number: RANRS5510 correct part for the RS5000 Steering Stabilizer and does it fit my 2005 jeep rubicon unlimited

Asked by jake from on

Hello, This Rs5000 Stabilizer will bolt directly up to the 05 LJ Rubicon. With the RS5510 the only reason you will need this is for the 07 and up Jk Jeeps. If you have anymore questions feel free to ask, Thank you.

Answered by [email protected] from on

RANRS5407 I need a bracket to install to my Jeep Rubicon unlimited 2005

Asked by jake from on

Hey Jake, the bracket part number you will need is RANRS5510. Thanks for your question.

Answered by Devin B. ext 4835 from on

RS5000 Steering Stabilizer I need a bracket to install the stabilizer. Please advise

Asked by jake from on

Hi Jake If you are using the RS5000 Steering Stabilizer on a JK you will need the bracket number RANRS5510. Thanks

Answered by LWiff ext 4804 from on

See all questions & answers

Manufacturer

Since the 1950s, Rancho has been a top innovator and industry leader in the research, design and manufacturing of performance parts and accessories including suspension and leveling systems, shock absorbers and associated on and off-road products for Jeeps and custom off-road vehicles. A rich Jeep heritage makes the Rancho brand and its full complement of suspension systems (4-inch and up) for Jeep CJ, JK, LJ, TJ, XJ and YJ models and rockGEAR products instantly recognized in the jeeping community. Rancho's line additionally features an extensive array of high performance suspension kits and ride control components for SUVs and trucks. Exhaustively tested and engineer driven to meet today's demanding standards, Rancho products are in a class of their own. Every one of their shocks and suspension and leveling systems includes a limited lifetime warranty, and Rancho�s shocks include a 90-day ride guarantee. Established in the off-road performance community, Rancho's product line is continuously evolving to develop the latest innovations for Jeeps, trucks and SUVs. Shop Rancho Now

Promotions