Constructed of black powder coated painted 16-gauge steel for heavy-duty, vaulted security. Vaulted glove box slides into OE glove box hole. Locking compartment will secure your valuables and give you piece of mind during off-road adventures.
I purchased this for a 2000 Wrangler. Installation was fairly easy. Some of the holes in the new glove box frame did not align up with the existing holes. I used a round file to enlarge 2 holes in the direction they were slightly off and I had to drill 2 new holes in the new metal frame for the screws in the latch area. It was easy to do and I am pleased with the end results. This new glove box is a lot more secure than the OEM glove box door.
Box installs easily enough using existing OEM holes and screws. Additional holes are recommended for extra security. Screws and washers provided were useless so I used 4 self tapping screws in the locations recommended and it was a cinch. Foam tape provided was brittle and old so I uses a bit of home window foam tape just fine. Lastly, put some oil on the lock mechanism after installing. I came out the next morning and could not get the lock to open! A bit of 3 in 1 oil and it glides open now.
I've had this glovebox for a couple years now and I have loved it, except that when I am out in the sticks, it's pretty loud. It came with some foam sticker stuff to help insulate it to reduce noise, but it still rattles a bit. I used some spray foam and that helped for a while until it fell off. I've ended up taking an old rag and sticking part of it inside so when it's locked, part of the rag is hanging out and that is usually enough to fill the gap so it doesn't rattle much, if at all. Again, great product, just a little rattly every now and then.
I needed to replace the original glove box in my TJ. This looked like a good solution. Fit was excellent. I painted to match interior. Install was easy except provided bolts were too short. I recommend.
fits my vehicle almost as well as specified. I'm not able to use 2 screws that the original glove box came with. So security isn't maximum, but it's still pretty secure. The foam sealant that came with this product was old and not usable because the sticky side was no longer sticky. It looks like it had dried out. But all in all, I like this product for the price I paid.
For 60 years Smittybilt has been fabricating aftermarket parts and today their products include Jeep tops, bumpers, lighting, winches and trail gear. Off-roaders count on the company's innovative parts like the original nerf bar side steps to equip their Jeeps for the trail and day-to-day driving. Pairing affordability without compromising quality is the hallmark of Smittybilt and the manufacturer's reputation carries over to products like its Overlander Series of tents, Adventure Boxes and SEMA award-winning magnetic trail skins for Jeeps. Smittybilt offers over 2,000 interior and exterior parts and accessories for 4x4s with multiple capabilities for jeepers of all levels. Shop Smittybilt Now
We Pay the Sales Tax on All Smittybilt Products