1" drop for transmission crossmember helps reduce driveline angle and vibration on vehicles not using a CV drive shaft.
I have a 3.5" RE lift and wanting to the the t_case drop. My question is what would be the best size drop for my lift. I've seen drops from 3/4" to 1.5" thanks in advance.
Asked by ben from Hammond, LA on
Ben, You normally want to lower the transfer case as little as possible so we would normally recommend about a 3/4" to 1" drop, so the Rubicon Express Transfer Case Lowering Kit 3/4" XJ/ZJ will work fine for your application. Please let us know if you have any other questions. Thanks!
Answered by Tom S. Ext. 4876 from Hammond, LA on
Will I need a floor jack to install this or can I do it with the Jeep (xj) sitting normally? Are there any other tips/tricks I will need to know for installation? Thanks, Jay
Asked by Jay from Colorado on
Jay, I would advise using a floor jack. That skid plate can get pretty heavy when you are under the Jeep holding it up with one hand and trying to start the bolts with the other. I would start spraying the factory bolts right now and every day with penetration oil, also now would be a great time to look at the transmission and t-case bushings for replacement. Other than that it is a pretty straight forward job.
Answered by Jason L from Colorado on
will I need to make other adjustments (linkage ect.)when installing the T-Case Lowering Kit #RE 2120 on my 97 XJ Country Thanks, Larry
Asked by Goldbug from SoCal on
Hello, this Rubicon Express Transfer Case Lowering Kit is a direct bolt in spacer kit. There are no other adjustments required for this install. Thank you!
Answered by Bob H from SoCal on
Rubicon Express has such a strong commitment to producing high quality Jeep suspension systems that it offers a lifetime, transferable hassle free warranty on all its products. It is a true lifetime warranty that can be used by the original owner of the tenth owner of the Jeep. The warranty covers all components, even down to the Super-Ride bushings. Rubicon In addition, Rubicon Express offers a wide variety of builder parts for customizing a build. All builder parts use the highest quality materials, components and manufacturing processes, insuring the built out rig will perform at the highest level possible. Rubicon Express has anything the builder needs from axle bracket kits to HD superflex joints, super-ride bushing kits to control arm brackets and much more. Shop Rubicon Express Now
We Pay the Sales Tax on All Rubicon Express Products