After going to all the time and effort to perform a Hemi engine swap make sure that you protect it with the BellyUp skid plate. The BellyUp provides maximum ground clearance,- providing over 2 inches additional clearance than stock. Ultimate protection is achieved through the 1/4 inch steel that is precision laser cut and formed to increase and maximize stiffness. Note: This kit provides the maximum amount of ground clearance possible, but requires some fine tuning and adjustment to eliminate drive shaft vibration.
I ordered this for my 2006 TJ. Sometime during the middle of production, Jeep changed the belly pan bolts to 12MM, so if you start the included bolts and they dont go in more than 1 full turn, you will need to find new 12MM bolts. Also, sometimes the nutserts get stripped or start turning, in that case, see this article: http://www.jeepforum.com/forum/f9/nutsert-transfer-case-removal-install-390635/. You will need to use the engine lift included with the kit and possibly drill new holes in your shroud if you also have a body lift
What is TeraFlex? A suspension company? Sure, but not just any suspension company. TeraFlex is a Jeep Wrangler suspension company. TeraFlex engineers enjoy coming up with products for one of the most engineered vehicles on the market. Interchangeable, dependable and durable - that is where TeraFlex comes in. TeraFlex picks up where Jeep left off to make Wranglers even better. Teraflex prides itself on striving for perfection in every aspect of product manufacturing and design. TeraFlex delivers the quality that hardcore off-road enthusiasts demand. Shop TeraFlex Now