Made of virtually unbreakable, flexible material, these Polyurethane flares will outlast your CJ and Wrangler and protect the body from flying rocks that oversized wheels and tires kick up. The black matte finish can be easily painted to match your Jeeps body color. Best of all, Xenon Sport Flares satisfy state and local laws requiring that the exposed tread edge of the tire be covered when looking down from the top of your Jeep� fenders. Xenon's designers didn't stop with great looks-they made these flares to fit the stock step and they can be used with the short stock body trim molding as well. Set of 4 flares. No drilling required. Notes: Uses stock mounting hardware. YJ Wrangler flare sets do not include the factory style end caps or running board step. Flares measure 6.5" wide.
They are pricey but they fit the factory install almost perfectly and are made of heavy weight durable plastic that should hold up well. If you need a full 6.5 inches of coverage (I have 33's) and want a simple clean look these are great.
Do i have to remove the stock running boards and step with these fender flares?
Asked by Jeff from Pittsburgh, Pa. on
Jeff, The factory running boards will still work with the Xenon YJ Wrangler Traditional Design Fender Flare Set. Please let us know if you have any other questions. Thanks!
Answered by Tom S. Ext. 4876 from Pittsburgh, Pa. on
will these fender flares cover 33x12.5x15 inch tires do i have to remove stock running boards and step?
Asked by Jeff from Pittsburgh, Pa on
Hi Jeff, Yes, these flare's from Xenon are 6.5" wide and provide plenty of coverage for tires that are 12.5' wide. Thanks for the inquiry!
Answered by Jim G Ext 4806 from Pittsburgh, Pa on
Can these be installed by a non-mechanic?
Asked by Wayne from Bellingham, WA on
Wayne, yes you can install these Xenon Sport Fender Flares in your garage. All you need is a pair of vice grips and a screw driver in about an hour you should be able to have these Xenon Sport Fender Flares installed.
Answered by Jason L from Bellingham, WA on
Southern California-based Xenon/American Fabrication Corporation (AFC) has been manufacturing quality low pressure reaction injection molded polyurethane aftermarket parts for 4x4s for over 35 years. Founded in 1973, their motto is "Quality starts with great design", and their emphasis is on producing visually inspiring products for Jeeps. Fender flares, running boards and bumper covers are among their most popular parts that off-roaders choose to add originality to their rigs. Xenon parts are capable of taking everyday abuse on and off the trail and of looking great doing itShop Xenon Now