1981 JEEP CJ7  - Rock Hard 4x4 Parts Rear Bumper with Tire Carrier includes 2 Inch Receiver and D - RH-2001-C - RH2001-C| 4WD.com

EXTENDED: FREE SHIPPING SITEWIDE No Minimum*

1981 JEEP CJ7  - Rock Hard 4x4 Parts Rear Bumper with Tire Carrier includes 2 Inch Receiver and D - RH-2001-C - RH2001-C

Rock Hard 4x4 Parts Rear Bumper with Tire Carrier includes 2 Inch Receiver and D - RH-2001-C

Rock Hard 4x4 Parts | Part Number: RFPRH-2001-C

Specifications

  • Location: Bumper Mount
  • Fitment: Direct Fit
  • In_Stock: In Stock
  • In_Stock: In Stock

    TECHNICAL DETAILS

  • 87-06 Wrangler TJ/YJ
  • 76-86 CJ
  • Frame kit require for install on CJs, part number RFPRH2001-CJ
  • Gloss black powder coat
  • Will handle up to 38" tire
  • A horizontal Hi-Lift Jack mount with padlock provision comes standard
  • 2" receiver for towing
  • All necassary hardware to install is included
  • Made in the USA
  • Fits Rock Hard bumper only

PRODUCT OVERVIEW

Rock Hard Jeep Rear Bumper/Tire-Carriers are made out of 3/16 x 2 x 4 thick tubing with ends that are boxed in. They have 2 sets of holes which mount to your Jeep frame in a standard position or can be raised 1 to increase departure angle and/or compensate for body lift. This bumper also comes with (2)-5/8 x 2-1/2 CNC D-Ring shackle mount with tabs that are welded on front, go through bumper and then welded on the backside too. A CB antenna mount and horizontal Hi-Lift Jack mount with padlock provision comes standard. The swing out tire carrier will hold up to a 38 tire. All needed hardware is furnished for installation. The Rock Hard Frame Kit is recommended with tires larger than 33" or with Rock Rack or Can Mounts. Black Powder Coated.

Reviews

5.0
5.0
1 bad A Jeep with Rock Hard Gear....

I have to say, this tire carrier and rear bumper are ROCK HARD. The product is by far what it's meant to be...


from South Texas |
5.0
Better than I expected!

This is a solid spare tire carrier. I shopped for a long time before deciding on the Rock Hard setup. They didn't disappoint. I installed it myself in about 3 days of working part time. Note: for my 87 YJ the frame brackets do NOT match the picture on the web site. They must be welded to the frame, not bolted. The upside is you don't have to drop the gas tank to get bolts through the frame. I know this is not the cheapest tire carrier, but I wanted something long term and you pay for what you get. I put a 33x12.50 tire and high lift jack on it and am planning on adding the gas can mounts soon. I'm glad I didn't go cheap!


from Amarillo, TX |

Question & Answers

4 Answered questions

Is the 2 inch receiver considered a Class III hitch such that trailers, boat, can be pulled? Or is it basically a hitch that you can attach a bike carrier to?

Asked by Alex from kentucky on

Alex, the Rock Hard 4x4 Parts Rear Bumper with Tire Carrier includes 2 Inch Receiver and D-ring Mounts is tow rated for the vehicle's maximum towing capacity. I hope this helps!

Answered by Sara H. Ext 4874 from kentucky on

Does the bumper come with this or do I need to buy that separate? Thanks David

Asked by David from on

Hi David, this Rock Hard 4x4 Parts Rear Bumper with Tire Carrier includes 2 Inch Receiver and D-ring Mounts is the bumper, tire carrier, hi-lift jack mount and mounting hardware. Hope this helps, thanks for your inquiry.

Answered by Jim G Ext 4806 from on

Does the bumper come with this or do I need to buy that separate? Thanks David

Asked by David from on

Hi David, This is a Rock Hard 4x4 Parts Rear Bumper with Tire Carrier includes 2 inch Receiver and D-ring Mounts. It includes the jack mount and jerry can holders also. Thanks for your inquiry.

Answered by Jim G Ext 4806 from on

See all questions & answers

Manufacturer

The concept for Nebraska-based Rock Hard 4x4 Parts was hatched back in the 1980s and evolved from DIY cage installation to a full-service manufacturing facility. Employing state-of-the-art CNC machining centers, outstanding craftsmanship and laser cut precision, Rock Hard takes the bolt-in design of bumpers, skid plates, cages and sliders to the next level. Their patented locking collar distinguishes itself in the aftermarket industry and all of their exterior products make off-roading in Jeeps safer and smoother. Protection is paramount on the trail and Rock Hard's products are easy to install, affordable and exude superior style. Shop Rock Hard 4x4 Parts Now

Promotions