For over 50 years, Crown Automotive has been the leading manufacturer and distributor of replacement parts for Jeep vehicles. With over 8,000 different part numbers, including many factory-discontinued items, we offer you exceptional quality that is only matched by an exceptional warranty. OHM readings for sending unit are EMPTY - 73 OHM, FULL - 10 OHM, and HALF - 23 OHM.
In addition to the calibration issue noted by the other poster, the reostat mechanism that reads the fuel level had disintegrated by the time I pulled the tank after a couple of years of innaccuracy. Now, I have to order the same part due to a lack of options. Awesome.
The first thing I have to warn customers about with this unit is DO NOT follow the directions that came with it. The directions say not to calibrate the unit, so I didn't. But without calibration it is WAY off on the low end by 3.5 gallons, that is a huge percentage of 15 gallons. I have not had the time yet to pull the tank again to calibrate the unit (contrary to the instructions), so I don't know if once calibrated it will read correctly. As of this writing due to my experience with this unit thus far I would not recommend buying it, try a different brand.
what are the ohm range for your sending units
Asked by Ken from Franklin, KA on
Hey Ken, the Crown Automotive Fuel Sending Unit Kit will need to be set at 10 ohms full, 23 ohms half, 73 ohms empty. Please let me know if you have any other questions, thanks.
Answered by Devin B. from Franklin, KA on
need to by a fuel guage for this product can you tell me what the ohms reading are when the tank is empty and when it is full
Asked by jim from tampa fl on
Full: 10 ohms, Half: 23 ohms, Empty: 73 ohms. Thanks!
Answered by Craig R. from tampa fl on