CIPAs Auto Dimming Rearview Mirror with Compass, Temperature, and Map Lights provides the perfect solution to annoying headlight glare at night. Sensors react to bright lights and dim the mirror glass for comfort and safety. It also offers a disable button for when dimming is unwanted. Additional features include a digital compass, temperature readout, and dual map lights. The compass features a bright LED display, and is self-calibrating. The temperature feature displays outside ambient temperature, and can be programmed to display in F or C. The map light feature provides that extra bit of light just where you need it. First time installations will require routing a power and sensor wire. Vehicles with an existing auto dimming mirror and a 7 pin connector can plug directly in. Otherwise, the wires can be tapped using the wire tap provided. Mirror is 10 in long by 2.5 in tall, and is a wedge base mounting mirror. This kit includes a mirror, 6.5 ft power wire harness, wire tap, 9 wire ties, temperature sensor, 14 ft temperature sensor wire, operation card, wedge button, and instructions. Mirror mounting epoxy not included. Hint: a camlock mount mirror is commonly found on imported vehicles and is removed by turning the mirror 90 degrees, then pulling down. A wedge mount mirror is commonly found on domestic vehicles and is removed by loosening a small screw and pushing the mirror up toward the roof. Made in the USA and FMVSS approved under section 571.111 of Standard No. 111.Note: these mirrors will not work for Dodge / Jeep vehicles with the "Tri-Lobe Twist or Cam - Lock Mounts " We do not recommend installing these mirrors if your vehicle has airbag sensors in the headliner, if your vehicle is equipped with OnStar, or if your vehicle is a hybrid model. Installation of this mirror may disable or damage certain components which are critical to the safety features installed on your vehicle. Check with your vehicle manufacturer for more information.