1976 GMC C25  - Advance Adapters Aluminum Conversion Radiator for GM V8 Engines - 716690-AA - 716690-AA| 4WD.com

EXTENDED: FREE SHIPPING SITEWIDE No Minimum*

1976 GMC C25  - Advance Adapters Aluminum Conversion Radiator for GM V8 Engines - 716690-AA - 716690-AA

Advance Adapters Aluminum Conversion Radiator for GM V8 Engines - 716690-AA

Advance Adapters | Part Number: ADV716690-AA

Specifications

  • Fitment: Direct Fit
  • Type: Conversion
  • In_Stock: In Stock
  • In_Stock: In Stock
  • Number of Cores: Two

    TECHNICAL DETAILS

  • 72-86 CJ
  • GM V8
  • With transmission cooler
  • 1" wide cores
  • 100% TIG welded
  • Temperature sensor provision
  • Cross flow

PRODUCT OVERVIEW

  • Our aluminum radiator with the 1 inch wide tubes and 16 fins per inch provides excellent heat dissipation. Our radiator uses a common 3/8 inch NPT fitting located in the cold side of the tank. This location provides for an accurate temperature reading of the fluid as it enters the engine. Our radiators are air tested a total of 3 times throughout the building process. Air can detect a leak before water. Our billet filler neck requires a standard GM overflow system style cap (3/4 inch depth). We recommend a 15 lbs. to 22 lbs. cap pressure. A higher pressure cap increases the boiling point. A higher pressure cap keeps the fluid in the cooling system, not the recovery tank. We use a cross flow design on our radiators to allow the radiator cap to be on the low-pressure side (cold side or water outlet) of the tank. Water drops in pressure as it is cooled
  • allowing recovered fluid back into the radiator during normal operation. On a down flow radiator, the top tank is always the hot side and is under constant pressure. Under sustained high RPM, this can force the fluid past the filler cap, out the overflow tube, and into the recovery tank even at normal operating temperatures. Our radiators use an aluminum angle for the mounting flange. This angle is TIG welded to the tanks. The aluminum angle has no mounting bolt holes. The customer determines the mounting pattern and location. This allows height adjustment for the radiator to center up to the water pump with the new engine location. This will also assist a desired height location if a body lift is to be installed.

Reviews

Question & Answers

0 Answered question

Manufacturer

Advance Adapters got its start in Downey, California in 1971 with a single adapter mating a Muncie car 4-speed to a Jeep Dana 18 transfer case. Eventually headers, overdrives, motor mounts and linkage brackets were added to the offerings to complement their core adapter components. When interest in rock crawling spiked in the mid-1990s, Advance Adapters offered low ratio transmission swaps then switched gears into the ultra-low gear transfer case arena. Today, the company is based in Paso Robles, California and their engine and transmission conversions for Jeeps are in kit form and sold as individual components. Shop Advance Adapters Now

Promotions

We Pay Your Sales Tax