1960 JEEP CJ5  - Rock Hard 4x4 Parts Replacement Factory Style Hoop - RH1010 - RH1010 | 4WD.com
FREE SHIPPING on Orders Over $50*

1960 JEEP CJ5  - Rock Hard 4x4 Parts Replacement Factory Style Hoop - RH1010 - RH1010

Rock Hard 4x4 Parts Replacement Factory Style Hoop - RH1010


  • Rock Hard 4x4 Parts | Part Number: RFPRH-1010
  • Fitment:Direct Fit
  • In_Stock:In Stock
  • In_Stock:In Stock
  • Installation Type:Bolt In


This is a Factory Style Sports Bar for your 1955-75 Jeep CJ-5. You must use this Sports Bar in order to install our Main Cage. The Main Cage cannot be installed on an OEM roll bar. All Sport Cages are complete bolt-in, you do not remove any of the factory sport cage to install our unit! This means no drilling, no welding. The Sports Cage fits under Soft Tops. All hardware is included. Unpainted, bare steel.


Question & Answers

3 Answered questions

thanks for your fast response, can you give me the dimension of the box as it is shipped? I might have my brother bring it on the airplane when he visits. Thanks Tom

Asked by tom from fairbanks, ak on

Hi Tom, This Rock Hard 4x4 Parts Replacement Factory Style Hoop shipping size is 54" L, 36" W, 3" high and it weighs about 70 lbs. Thank you for your inquiry.

Answered by Jim G Ext 4806 from fairbanks, ak on

do you have the height/width specs for this rollbar? My cj5 has a factory hardtop, and I want to make sure the rollbar isn't too high. Thanks!

Asked by tom from fairbanks, ak on

Hello Tom, I do not have the specs on the Rock Hard Hoop however it is built to the factory specs and will work with the hardtop. If you have anymore questions feel free to ask, Thank you.

Answered by [email protected] from fairbanks, ak on

What is the tubing diameter, what is the wall thickness, and is the tubing DOM Tubing? The Jeep is a 1971 CJ5, which I am rebuilding/partially restoring as a daily driver - previously the Jeep was a "dedicated trail rig". It currently has a 1" suspension lift (soon to be swapped for a stock set of four Jeep Cherokee rear leaf packs and hopefully no lift), 33" tires, Small Block Chevrolet 350, SM420 Chevrolet Transmission, Spicer 18 Transfer Case, Dana 44 Front Axle w/ a Detroit Locker, Dana 44 Rear Axle w/ Full Spool (but being replaced with an open differential). There has been 'some' body trimming, with more to come - but everything is massively reinforced, and shouldn't be of concern with this project.

Asked by Retired Firefighter now in College from Kittitas, WA on

Hello, The Rock Hard 4x4 Parts Replacement Factory Style Hoop uses 2" .120 wall DOM tubing. Please let us know if you have any other questions. Thanks!

Answered by Tom S @ Ext 4876 from Kittitas, WA on


The concept for Nebraska-based Rock Hard 4x4 Parts was hatched back in the 1980s and evolved from DIY cage installation to a full-service manufacturing facility. Employing state-of-the-art CNC machining centers, outstanding craftsmanship and laser cut precision, Rock Hard takes the bolt-in design of bumpers, skid plates, cages and sliders to the next level. Their patented locking collar distinguishes itself in the aftermarket industry and all of their exterior products make off-roading in Jeeps safer and smoother. Protection is paramount on the trail and Rock Hard's products are easy to install, affordable and exude superior style. Shop Rock Hard 4x4 Parts Now