Trail Gear Winches and Trail Accessories for Jeep Wranglers at 4WD.com

SEARCH

9 Products

SORT BY

Trail Gear Winch Mount

Trail Gear Winch Mount

From $421.99

Ships Free

If you?re looking at building your own front bumper, one of our winch mount plates will make a great starting point. These winch mount plates bolt on in the factory frame holes, and are made from CNC bent 1/4 inch steel plate. We built them with two inch receiver tubing so that you can use a receiver shackle for a pull point or a recovery point. We also predrilled holes for easy winch mounting. If you can bend tube this winch mount plate is all you need to build a great custom bumper. Note: Some winches may require slight trimming or clearancing of the grill.

From $421.99

Trail Gear D-Ring

Trail Gear D-Ring

From $19.99

Ships Free*

The mounting plate is made out of 3/8? thick steel with a 1? thick d-ring mount and 1/2? laser cut hardware. This d-ring mount is designed for their 3/4? d-rings. Available in a 3?x3? and 3?x3.5? mounting patterns.

From $19.99

Trail Gear Rock Recovery Winch Line

Trail Gear Rock Recovery Winch Line

From $43.99

Ships Free*

Pure Dyneema fiber

From $43.99

Trail Gear Hi-Lift Jack Mount

Trail Gear Hi-Lift Jack Mount

From $32.99

Ships Free*

Trail Gear Jeep Jack Mount is unpainted and must be welded on
Hi Lift Jack Mount is laser cut from 3/16 inch thick steel and then CNC formed
JK Hi Lift Jack Mount includes the hardware
Holds Hi-Lift Jack secure and has pervision for a padlock.

From $32.99

Trail Gear TG Winch Puck

Trail Gear TG Winch Puck

From $9.99

Ships Free*

TG Winch Puck

From $9.99

Trail Gear Clevis End Kit

Trail Gear Clevis End Kit

From $116.99

Ships Free

Trail Gear's Steering Ram Clevis End Kit is one of the most complete kits on the market. All necessary hardware is included along with the necessary spacers. The Clevis ends are clear zinc-plated for a sharp look and long lasting finish. This kit will fit most large double endedsteering rams and 3/4in. single ended rams. This design works best with Heim-style rod ends with a 3/4in. bolt hole

From $116.99

Trail Gear Tube Thimbles

Trail Gear Tube Thimbles

From $11.99

Ships Free*

Synthetic winch line is expensive to replace so it is important to protect your line and make it last as long as possible. We at Trail-Gear understand that, so we developed a stainless steel tube thimble that will protect your line and keep it from twisting and fraying at the ends. Our tube thimble is easy to install. Simply cut your line down a few inches until you have a new clean piece of line, push the line through the thimble and then braid the line so that the thimble is in place.

From $11.99

Trail Gear Rock Recovery Suspension Winch 3000

Trail Gear Rock Recovery Suspension Winch 3000

From $131.99

Ships Free

Trail Gear small, easy to mount suspension electric winch that will allow you to stabilize your suspension
Effectively controls how much suspension droop you have during times were control makes the difference
Install this winch on the front or rear of your rig and have plenty of wire to reach the battery.

From $131.99

Trail Gear Fairlead Mount

Trail Gear Fairlead Mount

From $30.99

Ships Free*

This Bolt-On Fairlead Mount offers a universal design to fit on most bumpers and will work with a Hawse or roller style fairlead. This fairlead mount has a pre drilled bolt pattern for most 5000-9500 model low-profile winches. Includes 3/8?-16 and M10-1.5 extended winch mount hardware.

From $30.99

Related Articles:
Smittybilt XRC8
Gone Winching: Using and Maintaining Your Jeep Winch
How to Choose the Best Winches for Jeeps
Jeep Winches: What?s Hot
Four Tips for Using a Winch Kit
What You Need to Know about Warn Winches
Smittybilt Gen2 Winch Line Set to Make a Splash
Smittybilt Winch
Get Your Rig Out of any Predicament with a Winch
Gone Winching: Using and Maintaining Your Jeep Winch
Blend Style and Utility with Smittybilt Products