Our front springs feature a full military wrap on the front and the 1/4 wrap on the rear. Spring rate is 220 lbs per inch. Leaf pack is 6 leaves. Springs are 47 inch long as measured along the top leaf. Pin to center of front mount is 22 inch and pin to center of the shackle mount is 25 inch. New poly bushings and left side spring pad are included with springs.
Our shackle kits feature threaded zerk fittings. Factory size 18mm bolts with crimp nuts. Zinc plated plates. Polly bushings included. Lengths listed below are measures from center of hole to center of hole. Stock shackles are 3.5 inch between holes.
The Trail-Gear Samurai Spring Over Axle Conversion Kit comes with all the needed parts to install your spring over on both the front and rear axles. DOT approved extended brake lines and 9/16 inch u-bolts are included in the kit along with with laser cut, CNC formed 1/4 inch spring perches. This is a kit that is simply built to last. No need to take your driveline to a shop to be resized after the conversion is completed because we have also included our world famous billet driveline spacers with all needed hardware. Once the spring over conversion is completed you will be able to install larger tires and a high steer kit.