Jeep Bilstein Suspension and Shocks

Bilstein 5100 Series Shocks

From $71.06

• Individually engineered for a wide array of specific vehicles and lift combinations
• Monotube gas pressure technology
• Easy to install, direct bolt-on, no modification required
• Multi-layer zinc finish is the most durable in the industry
• 5100 shocks provide the most comprehensive range of vehicle applications
• Limited Lifetime Warranty

Bilstein 5100 Ride Height Adjustable Series Shock Absorber

From $89.99

• An extremely affordable and practical alternative to coil spring spacers
• BILSTEIN's superior monotube design
• Utilizes the vehicle's stock front coil springs
• Zinc finish with multi-layer unique BILSTEIN coating for extreme protection
• Self-adjusting deflective disc valving with independent rebound and compression tuning

Bilstein 4600 Series Shocks

From $62.99

• Monotube gas pressure technology
• Easy to install, direct bolt-on, no modification required
• Improved control and stability, precise handling, ultimate performance, and incredible comfort
• BILSTEIN’s unique piston design offers greater sensitivity and superior vehicle control
• Limited Lifetime Warranty

Bilstein CA4 Series Shock Absorbers

From $239.99

• Monotube gas pressure construction
• 46mm working piston
• One piece threaded body design, show polished billet body
• Hard anodized lock ring, seat, and hat
• High performance poly urethane bushings
• Shock may be shown with optional PermaStar® coil spring

Bilstein 5100 Series Shock Packages

From $319.96

• Designed specifically to help your stock height Jeep reach its pinnacle in ride performance and handling
• Improved control and stability, precise handling, ultimate performance, and incredible comfort
• Easy to install

Bilstein 5125 Series Shocks

From $71.99

• Monotube gas pressure construction
• Self-adjusting deflecting disc valving
• High-flow piston reduces harshness
• Independent rebound & compression tuning
• Larger working piston area for exact damping
• Superior control for large diameter tires
• Available by travel lengths for custom applications

Bilstein B8 5100 Series Steering Stabilizers

From $71.06

• Bilstein 5100 Series Steering Damper
• Shaft Diameter: 11mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body (Non-coilover)
• Internal Design: Mono tube
• Boot Included: Yes

Bilstein 5160 Series Shocks

From $159.29

• BILSTEIN's industry leading monotube design
• Zinc finish with multi-layer unique BILSTEIN coating for extreme protection
• Remote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
• Special swivel banjo fittings allow for 360° of rotation
• Vehicle specific reservoir mount kit included

Bilstein 4600 Series Shock Packages

From $279.96

• Designed specifically to help your stock height Jeep reach its pinnacle in ride performance and handling
• Improved control and stability, precise handling, ultimate performance, and incredible comfort
• Easy to install

Bilstein 6100 Series Shocks

From $142.99

• Self-adjusting deflective disc valving
• Factory rebuildable
• Independent rebound & compression tuning
• 14mm piston rod
• 1/2" heim ends
• High flow piston reduces harshness
• Standard 8" thru 14" travel lengths
• Coilover 5" thru 10" travel lengths
• Available in standard body and coilover

Bilstein 5165 Series Shocks

From $159.29

• BILSTEIN’s industry leading monotube design
• Remote reservoir dramatically increases shock oil capacity for even greater heat dissipation and damping sensitivity
• Special swivel banjo fittings on the reservoir hose allow for 360° of rotation
• For increased wheel travel and more shaft movement, the “floating” dividing piston is located in the reservoir
• Zinc finish with multi-layer unique BILSTEIN coating for extreme protection
• Includes reservoir mounting kit and detailed instructions
• Shown with optional billet aluminum reservoir mounting clamp
• Available in 5"-14" travel lengths with various linear valvings.

Bilstein B6 Series HD Shock Absorbers

From $82.79

• Monotube gas pressure construction
• Improved safety and sportiness
• Added traction and enhanced stability
• Increased durability and performance while maintaining ride comfort
• Road-tested and fine-tuned by BILSTEIN for each vehicle specific application

Bilstein 7100 Series Shocks

From $28.79

• Monotube gas pressure construction
• Self-adjusting deflecting disc valving
• 2" diameter shock body
• High-flow piston reduces harshness
• Choice of valvings
• Schrader valve shocks with dividing piston
• 8", 10", 12", & 14" travel

Bilstein Shock Reservoir Mount

From $39.59

• All B1 Components are designed to fit our BILSTEIN shock absorbers and struts
• All parts are produced to OEM standards and quality that BILSTEIN has built our reputation on
• Fitment is simple all available components are designed to be used as original equipment replacements with no modifications required

Bilstein 9300 Black Hawk Series Shock Absorber

From $2,719.99

• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 1/2 inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable

Bilstein 9100 Series Bump Stop

From $174.59

• Thick-walled Monotube design
• Seamless steel & electroless nickel finished body
• Universal frame bracket fitment (2 inch O.D.)
• 1-1/4 inch hardended chrome steel shaft
• Nitrogen adjustable spring rate capability

Bilstein 9100 Series Coilover Shock Absorber

From $484.99

• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0 inch or 2.65 inch (OD) Body
• Coil Spring Hardware: 3 inch or 3-5/8 inch (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable

Bilstein 9100 Smooth Body Series Shock Absorber

From $348.99

• Monotube gas pressure construction
• 2.0 inch or 2.65 inch (OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable

Bilstein 9100 Series Shocks

From $625.99

• For Smooth Body
• Monotube gas pressure construction
• 2.0" or 2.65"(OD) body
• Hose length and fittings options: straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable For Coilover:
• Monotube gas pressure construction
• Designed to combine the function of damper and spring
• 2.0" or 2.65 (OD) Body
• Coil Spring Hardware: 3" or 3-5/8" (ID)
• Hose Length and Fittings Options: Straight, 90 degree, 45 degree
• Valving can be adjusted internally for rebound and compression
• Completely owner rebuildable
• Special Notes:BILSTEIN does not manufacture or sell coil springs for off-road use. However, most BILSTEIN off-road retailers sell springs. They can also offer advice on spring rates
• It is not recommended to use a coilover in conjunction with an auxiliary spring source, such as Leaf Springs or Torsion Bars. For Bypass:
• Widest range of tuning combinations within the industry
• Available in 2.0” or 2.65” body
• Completely owner tunable and rebuildable
• Available in piggyback and various hose lengths
• Bypass tubes allow for position sensitive damping adjustability - custom bypass layouts available
• Special Notes:External Bypass dampers require an external spring source such as a coilover, leaf spring, torsion bar, or auxiliary coil. These dampers will not support a vehicle. For Rock Crawler:
• Monotube gas pressure construction
• Nickel plated 2" diameter threaded body
• 2.5" x 12" reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12", 14" and 17" travel
• Completely owner rebuildable

Bilstein 9100 Rock Crawler Series

From $339.99

• Monotube gas pressure construction
• Nickel plated 2 inch diameter threaded body
• 2.5 inch x 12 inch reservoir with -8 aeroquip match mate hose
• Hard anodized screw top and aurora spherical bearings
• Valved specifically for rock crawling
• Optional coilover setup with dual rate spring
• Available in 12 inch, 14 inch and 17 inch travel
• Completely owner rebuildable

Bilstein 9300 Series Shocks

From $754.99

• For coilover:
• Comes with ¾” teflon uniball with machined aluminum eye ring
• Hose length and fittings options: straight, 90 degree, 45 degree
• Completely owner tunable and rebuildable
• Widest range of tuning combinations within the industry
• Included spring hardware for dual-rate 3” ID springs
• Hi-flow independent rebound and compression bypass adjusters For Black Hawk
• One piece 6061 extruded aluminum body with hard anodized finish
• 30% faster heat dissipation
• 10% - 25% lighter than similar welded bypass steel shocks
• Up to 100 degrees cooler peak operating temperature
• 4 ½ inch diameter aluminum reservoir with anti-cavitation valve (ACV)
• Bypass tubes allow for position sensitive damping adjustability
• Completely owner tunable and rebuildable

Bilstein SZ Series Shock Absorbers

From $128.99

• SZ Series Shock Absorbers
• Designed For But Not Limited To Modifieds/Late Models
• Steel Body Design Allows Conversion To Coilover
• Sealed Unit
• Expect Bilsteins Famous Consistent Fade-Free Performance
• Plated Body For Extreme Durability/Rapid Heat Dissipation

Bilstein SL Series Shock Absorbers

From $128.99

Bilstein 7100 Classic Coilover Series Shock Absorber

From $249.99

• Monotube gas pressure construction
• Threaded body lengths to 10 inchs of travel
• Self-adjusting deflecting disc valving
• 2 inch diameter shock body
• High-flow piston reduces harshness
• Factory rebuildable
• Spherical bearing end loops, which accept 1/2 inch and 12mm mounting bolts
• Available for standard and coilover applications, this series is primarily designed for vehicles with modified shock mounts and Type I VW suspension