The awning bracket is designed with welded gussets to provide additional strength when awnings are mounted to roof bars on vehicles used off road or under extreme conditions. Zinc plated and powder coat for corrosion resistance and designed to mount either upright or inverted, The awning bracket is 50 mm wide allowing it to fit over both Thule SquareBar & Rhino Heavy Duty in the inverted position, or upright using T-bolts or channel nuts on Thule ProfessionalBar, WingBar & AeroBar or Rhino Heavy Duty. Pre-drilled to accept 8mm bolts, at least 2, but preferably 3 bolts should be used to mount to the roof bar for maximum strength. The outer bolt hole between the gussets must always be used for the gusset to be effective. Three slotted 6mm holes are provided to mount the awning. This awning bracket is not supplied with hardware. Due to different bar designs, it is recommended to use T-bolts and channel nuts supplied by the roof bar manufacturer.
Incorporating the latest in swag design and comfort, the ARB SkyDome swags have been designed from the ground up to meet the exact needs of off-roaders and car campers alike
ARB?s SkyDome range has been designed with very generous dimensions
The industry leading height from head to hip allows occupants to move around freely and spread out without feelings of confinement and the large mesh areas provide excellent ventilation to reduce internal condensation and allow greater airflow in warm climates
The freestanding architecture means ARB SkyDome swags require no pegs or guy ropes when deployed on flat surfaces
Matched with waterproof materials and a high density corrugated foam mattress, the SkyDome will ensure a dry and comfortable night?s sleep in any conditions
SkyDome range includes both single and double configurations and can be purchased with the optional Boot Swag to keep footwear and other gear dry and away from the elements