Built out of 3/16 inch Plate Steel, the Trail-Gear Link Mounts are a perfect solution for upgrading the factory brakets. They also make it easy to swap suspension from leaf springs to a 3-Link or 4-Link system.
The BTF Trick Tab with 1/4 Hole was designed to mount objects to round tube. They can be used to mount body panels, radiator catch cans, and much more. The trick tabs measure 1 inch from the mounting base to the center of the bolt hole and are approximately 2 inch wide. They are stamped from 1/8 inch steel plate. Look around in our projects section for examples of their use.
When doing a solid axle conversion on a Tacoma, you are required to remove the OEM rack and pinion steering system, which leaves a large hole in your firewall. Our Tacoma firewall plate fills that hole and bolts into the OEM fastener locations. This kit takes all the work out of this area of the project and cuts a 2 hour job down to 10 minutes.