Welcome Guest
SHOP JEEP PARTS
- Home
- USA Standard Gear
- Drivetrain & Differential
USA Standard Gear Differential Master Overhaul Kits
USA Standard Gear Differential Master Overhaul KitsFrom $125.31
Ships Free
USA Standard Gear Differential Bearing Kits
USA Standard Gear Differential Bearing KitsFrom $152.21
Ships Free
62 Results Found
SORT BY
USA Standard Replacement Ring & Pinion Gear Set for Dana44 Short Pinion Reverse Rotation,5.38 - ZGD44RS-538RUB
USA Standard Replacement Ring & Pinion Gear Set for Dana44 Short Pinion Reverse Rotation,5.38 - ZGD44RS-538RUB
Ships Free
- Fits reverse rotation Dana Spicer 44 short pinion in Jeep JK
- 8.80 inch ring gear diameter
- Front
- 30 spline pinion
- 10 ring gear bolts
- 5.13 ratio
- California Residents: WARNING
$214.51
USA Standard Master Overhaul Kit Dana 60 Front - ZKD60-F
USA Standard Master Overhaul Kit Dana 60 Front - ZKD60-F
Ships Free
- Fits Dana Spicer 60 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$211.69
USA Standard Master Overhaul Kit for '09 & Down Ford 8.8 Inch Differential. - ZKF8.8
USA Standard Master Overhaul Kit for '09 & Down Ford 8.8 Inch Differential. - ZKF8.8
Ships Free
- Fits 2009 and down Ford 8.8 inch
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$129.18
USA Standard Master Overhaul Kit for Toyota Tacoma And 4-Runner With Factory Electric Locker - ZKTACOMA-LOC
USA Standard Master Overhaul Kit for Toyota Tacoma And 4-Runner With Factory Electric Locker - ZKTACOMA-LOC
Ships Free
- Fits Toyota Tacoma and T100 rear with factory locking differential
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and silicone.
- California Residents: WARNING
$401.41
USA Standard Spartan Locker for Dana 44, 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft - SLD44-30
USA Standard Spartan Locker for Dana 44, 30 Spline Axles, Includes Heavy-Duty Cross Pin Shaft - SLD44-30
Ships Free
- Fits Dana Spicer 44 with 30 spline axles
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
- California Residents: WARNING
$433.34
USA Standard Replacement Ring & Pinion Gear Set for Dana 44 JK Rear In A 4.11 Ratio - ZGD44JK-411RUB
USA Standard Replacement Ring & Pinion Gear Set for Dana 44 JK Rear In A 4.11 Ratio - ZGD44JK-411RUB
Ships Free
- Fits Dana Spicer 44 JK rear
- 8.89 inch ring gear diameter
- 24 spline pinion
- 10 ring gear bolts
- 4.11 ratio
- California Residents: WARNING
$208.45
USA Standard Master Overhaul Kit for Dana 44 JK Non-Rubicon Rear Differential - ZKD44-JK-STD
USA Standard Master Overhaul Kit for Dana 44 JK Non-Rubicon Rear Differential - ZKD44-JK-STD
Ships Free
- Fits Dana Spicer 44 JK non-Rubicon rear
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
- California Residents: WARNING
$339.99
USA Standard Master Overhaul Kit Dana 60 And 61 Rear Differential - ZKD60-R
USA Standard Master Overhaul Kit Dana 60 And 61 Rear Differential - ZKD60-R
Ships Free
- Fits Dana Spicer 60 rear
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$176.66
USA Standard Master Overhaul Kit for '07 & Down Ford 10.5 Differential - ZKF10.5-A
USA Standard Master Overhaul Kit for '07 & Down Ford 10.5 Differential - ZKF10.5-A
Ships Free
- Fits 1999-2006 Ford 10.5 inch
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$374.34
USA Standard Ring & Pinion Replacement Gear Set for Dana 30 Short Pinion In A 4.56 Ratio - ZGD30S-456TJ
USA Standard Ring & Pinion Replacement Gear Set for Dana 30 Short Pinion In A 4.56 Ratio - ZGD30S-456TJ
Ships Free
- Fits standard rotation Dana Spicer 30 with short pinion
- 7.20 inch ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 4.56 ratio
- California Residents: WARNING
$170.14
USA Standard Master Overhaul Kit for Dana 30 Short Pinion Front Differential - ZKD30-TJ
USA Standard Master Overhaul Kit for Dana 30 Short Pinion Front Differential - ZKD30-TJ
Ships Free
- Fits standard rotation Dana Spicer 30 with short pinion
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, oil baffles and slingers, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$187.49
USA Standard Master Overhaul Kit for Dana 44 JK Rubicon Front Differential - ZKD44-JK-REV-RUB
USA Standard Master Overhaul Kit for Dana 44 JK Rubicon Front Differential - ZKD44-JK-REV-RUB
Ships Free
- Fits reverse rotation Dana Spicer 44 JK Rubicon
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
- California Residents: WARNING
$349.31
USA Standard Master Overhaul Kit for 2010 & Down GM & Chrysler 11.5 Inch AAM Differential - ZKGM11.5
USA Standard Master Overhaul Kit for 2010 & Down GM & Chrysler 11.5 Inch AAM Differential - ZKGM11.5
Ships Free
- Fits 2010 and down GM and Chrysler 11.5 inch
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
- California Residents: WARNING
$406.47
USA Standard Pinion Installation Kit for Non-Rubicon JK 44 Rear - ZPKD44-JK-STD
USA Standard Pinion Installation Kit for Non-Rubicon JK 44 Rear - ZPKD44-JK-STD
Ships Free
- Fits Jeep JK non-Rubicon rear
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
- California Residents: WARNING
$81.72
USA Standard Spartan Locker for AMC Model 35, 27 Spline Axles, 1.560 Inch Carrier, with Heavyduty Cross Pin - SLM35-1.5-27
USA Standard Spartan Locker for AMC Model 35, 27 Spline Axles, 1.560 Inch Carrier, W/Heavyduty Cross Pin - SLM35-1.5-27
Ships Free
- Fits AMC Model 35 with 27 spline axles and 1.560 inch side gear bore
- Made from 9310 steel for added strength
- Replaces the spiders in a standard carrier case
- California Residents: WARNING
$427.52
USA Standard Pinion Installation Kit for Rubicon JK 44 Rear - ZPKD44-JK-RUB
USA Standard Pinion Installation Kit for Rubicon JK 44 Rear - ZPKD44-JK-RUB
Ships Free
- Fits Jeep JK Rubicon rear
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
- California Residents: WARNING
$81.72
USA Standard Replacement Ring & Pinion Gear Set for Dana 44 In A 4.56 Ratio - ZGD44-456
USA Standard Replacement Ring & Pinion Gear Set for Dana 44 In A 4.56 Ratio - ZGD44-456
Ships Free
- Fits standard rotation Dana Spicer 44
- 8.50 inch ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 4.56 ratio
- California Residents: WARNING
$193.31
USA Standard Master Overhaul Kit for Dana 30 Front Differential Without C-Sleeve - ZKD30-F
USA Standard Master Overhaul Kit for Dana 30 Front Differential Without C-Sleeve - ZKD30-F
Ships Free
- Fits standard rotation Dana Spicer 30 front
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$177.43
USA Standard Replacement Ring & Pinion Gear Set for Dana 44 In A 4.56 Thick Ratio - ZGD44-456T
USA Standard Replacement Ring & Pinion Gear Set for Dana 44 In A 4.56 Thick Ratio - ZGD44-456T
Ships Free
- Fits standard rotation Dana Spicer 44
- 8.50 inch ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 4.56 ratio
- Thick gear for 3.73 and down carrier
- California Residents: WARNING
$193.31
USA Standard Master Overhaul Kit for Toyota T100 & Tacoma Rear Differential without Factory Locker - ZKT100
USA Standard Master Overhaul Kit for Toyota T100 & Tacoma Rear Differential W/O Factory Locker - ZKT100
Ships Free
- Fits Toyota T100 and Tacoma without factory locker
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, pinion nut, crush sleeve, thread locker, marking compound with brush and silicone.
- California Residents: WARNING
$322.99
USA Standard Master Overhaul Kit for Dana 80 Differential (4.125 Inch OD Only). - ZKD80-A
USA Standard Master Overhaul Kit for Dana 80 Differential (4.125 Inch OD Only). - ZKD80-A
Ships Free
- Fits Dana Spicer 80 with 4.125 inch O.D. pinion bearing
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, oil baffles and slingers, thread locker, marking compound with brush and silicone.
- California Residents: WARNING
$332.65
USA Standard Master Overhaul Kit for GM 8.5 Differential With HD Posi Or Locker - ZKGM8.5-HD
USA Standard Master Overhaul Kit for GM 8.5 Differential With HD Posi Or Locker - ZKGM8.5-HD
Ships Free
- Fits GM 8.5 inch rear with aftermarket positraction
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$133.18
USA Standard Master Overhaul Kit for Dana 30 JK Front Differential. - ZKD30-JK
USA Standard Master Overhaul Kit for Dana 30 JK Front Differential. - ZKD30-JK
Ships Free
- Fits Dana Spicer 30 JK
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, axle seals, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$284.78
USA Standard Master Overhaul Kit for Chrysler '76-'04 8.25 Inch Differential - ZKC8.25-B
USA Standard Master Overhaul Kit for Chrysler '76-'04 8.25 Inch Differential - ZKC8.25-B
Ships Free
- Fits 1976-2004 Chrysler 8.25 inch
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
- California Residents: WARNING
$125.31