D-Ring Mount Is Included Rear Bumpers

Poison Spyder RockBrawler Rear Bumpers

From $518.99

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper

Smittybilt XRC Rear Bumpers

From $299.99

• Smittybilt Jeep rear bumper is covered in Black powder coat
• Constructed of 3/16 inch cold rolled steel
• Built in class III receiver hitch and two d-ring mounts
• Available with and without tire carrier for this Wrangler rear bumper
• 5 year limited warranty

Smittybilt SRC GEN2 Rear Bumpers

From $599.99

• Smittybilt SRC Gen2 Jeep rear bumper is covered in Two-stage textured matte black powdercoat finish
• UHMW (ultra-high-molecular-weight polyethylene) to provide the ultimate protection for rock crawling
• Manufactured from 3/16-inch cold rolled steel
• Smittybilt limited lifetime warranty
• LED lights included
• Modular design tire carrier can be added (sold separately) to the Wrangler rear bumper
• Fender-to-fender protection
• Aux back up light cut out provided
• Class III hitch for true towing with towable D-ring mounts
• Anti-rattle provision provided for receiver hitch
• Works with XRC GEN2 tire carrier (#76857)

Poison Spyder Brawler Full Width Rear Bumpers

From $618.99

• The Poison Spyder Customs Brawler Wrangler front bumper is 3/16 inch plate steel
• CNC laser-cut and precision brake-formed into a low profile, high clearance design
• This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Jeep front bumper.

Fab Fours Premium Rear Bumpers

From $1,129.99

• Fab Fours Premium Jeep rear bumpers are available in bare steel or Black powder coat
• 3/16 inch steel construction
• Fab Four's signature knife edge and recessed D-Ring mounts
• CB antenna mount
• Compatible with factory receiver hitch
• Wrangler rear bumper tire carrier sold separately

Smittybilt XRC Atlas Rear Bumpers

From $679.99

• Smittybilt Wrangler rear bumper is coated in a two-stage textured matte Black finish
• Hitch
• Available with and without Tire carrier
• Smittybilt limited lifetime warranty on this Jeep rear bumper

Pro Comp Suspension Jeep Crawler Rear Bumpers

From $153.99

• Pro Comp Jeep rear bumper in a gloss black powder coat finish
• Constructed with 1/4 inch plate steel
• A Wrangler rear bumper designed for high departure and approach angles
• Available with and without d-rings
• With 2 inch receiver (Not rated for towing)

Poison Spyder BFH Rear Bumpers

From $299.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!

Smittybilt SRC Classic Rear Bumpers

From $214.99

• Smittybilt SRC Classic Rock Crawler Jeep Rear Bumper
• Available with and With out D-Ring
• No Drill Installation
• Available with or with out Wrangler rear bumper tire carrier
• Black Textured Powder Coat
• 5 year limited warranty

Rampage Front and Rear Bumper Packages

From $899.99

• Custom welded shackle mounts with 3/4 inch shackle d-rings
• 3/16 inch steel plate design
• Two 4 inch light openings, lights sold separately
• Built-in 2 inch receiver

Smittybilt SRC Rear Bumpers

From $369.99

• Smittybilt SRC Wrangler rear bumper is covered in a two stage textured black powder coat finish
• Dense zinc treated undercoating
• Expertly robotically welded
• Bumpers bolt directly to your vehicle
• Available with or without d-rings
• Jeep rear bumper is available with and without tire carrier

Rampage Recovery Rear Bumpers

From $661.99

• Rampage Recovery Wrangler rear bumpers are available in Gloss Black and Textured Black powder coat
• Available with and without tire carrier
• Custom welded Shackle mounts with 3/4 inch Shackle D-rings
• Durable powder coat finish
• 3/16 inch steel plate design
• Lights sold separately for this Jeep rear bumper

Ranch Hand Sport Series Rear Bumpers

From $547.99

Bestop HighRock 4x4 2 Inch Receiver Hitch Bumpers

From $393.99

• Bestop Jeep rear bumpers are constructed of 3/16” laser cut steel with E-coat and wrinkle finish powder-coat.
• Includes a Class 2.5 receiver hitch that accepts many popular 2" hitch mount accessories
• No-drill application with bolt-on convenience to factory mounting points.
• 2” hitch mount accessories. (Warning: Do not exceed vehicle manufacturer’s recommended towing capacity.)
• D-Ring mounting bosses welded both front and back for tremendous strength on this Wrangler rear bumper (D-Rings sold separately)
• Approach/Departure roller mounts not included

Poison Spyder Rear Stinger Tire Carriers

From $768.99

• The Poison Spyder Rear Stinger Jeep rear bumper is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.
• By pulling the two upper pins,The Rear Stinger is basically a fold-down spare tire carrier.
• This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate.
• The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo.
• It also has an integrated license plate mount located in the center of the carrier.
• Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.:This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Wrangler rear bumper.

Smittybilt XRC Swingaway Rear Bumpers

From $334.99

Warn Elite Series Rear Bumpers

From $749.97

• Warn Jeep rear bumper is covered in a black powder coat finish
• This Wrangler rear bumper has D-ring eyelets for more increased recovery options

Body Armor 4X4 Rear Bumpers

From $299.99

• Body Armor 4x4 Jeep rear bumpers are coated in a textured black powder coat
• Plate steel construction
• With swing arm post only, this Wrangler rear bumper does not include tire carrier

Bestop Highrock 4x4™ Modular Rear Bumpers

From $399.99

• Black powder coat
• High-access Wrangler rear bumper profile allows more clearance over rocks or trail obstacles
• 3/16” thick steel to withstand tough off-road trails or rock-crawling
• Electrostatically-applied “E”-coat base layer with matte-black powder-coat top finish for superior resistance to corrosion, extra protection against nicks, scrapes & scratches
• Bolt-on installation to existing factory Jeep rear bumper mounting locations - no drilling required
• Accomodates mounting of optional Tire Carrier for totally integrated appearance and function
• Includes fully-welded D-Ring shackle mounts with 1” inside diameter
• A tough as nails, tested for durability and strength rear bumper for Jeep

Addictive Desert Designs Stealth Fighter Rear Bumpers

From $969.99

• These Addictive Desert Designs Jeep rear bumpers are 100% bolt on and no cutting of the frame is required
• These Wrangler rear bumpers are constructed of 3/16 inch and 1/8 inch plate used to strengthen and reduce weight
• Laser Cut Skid plates, Tabs and Plates for a Precise Fit

ARB Rear Bumpers

From $664.99

• ARB 4x4 Accessories Jeep rear bumpers come in a Black powder coat
• Tow points
• Recessed Fog Lamps
• Recessed indicators
• Tire and Jerry Can Carrier Sold Separately for the Wrangler rear bumper

Poison Spyder DIY Rear Stinger Tire Carriers

From $648.99

• The Poison Spyder Rear Stinger Jeep rear bumper is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.
• By pulling the two upper pins,The Rear Stinger is basically a fold-down spare tire carrier.
• This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate.
• The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo.
• It also has an integrated license plate mount located in the center of the carrier.
• Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.:This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Wrangler rear bumper.

Rock-Slide Engineering Rigid Series Rear Bumpers

From $999.99

• Rock Slide Engineering Rigid Jeep rear bumper in black powder coat
• Without tire carrier
• Made from 3/16 inch steel with 1/4 inch mounting plates
• 2 D-ring shackle points
• Integrated 2 inch receiver
• This Wrangler rear bumper is made in the USA

Rugged Ridge XHD Rear Bumpers

From $549.99

• Rugged Ridge Jeep rear bumper
• Allow for over sized tires
• Wrangler rear bumper covered in Black powder coat
• Available with and with out bumper pods