Jeep Poison Spyder Customs Bumpers, Tire Carriers & Winch Mounts

Poison Spyder RockBrawler Rear Bumpers

From $468.99

See Price In Cart!

• The Poison Spyder Rear Stinger Wrangler rear bumper is available in Bare Steel or Black Powder Coat
• 3/16 inch plate steel
• Maximize performance on the toughest trails
• High clearance, multi-faceted design Jeep rear bumper

Poison Spyder Brawler Lite Front Bumpers

From $479.99

• The Poison Spyder RockBrawler front bumper for Jeep is fabricated from 3/16 inch steel plate, CNC laser cut and brake-formed for a precise fit.
• The Stinger is made of 1.75 inch X .120 wall DOM tubing.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel.
• The integrated winch mount on this Wrangler front bumper accepts most major manufacturer's winches up to 15,000 lbs.
• Another characteristic of the RockBrawler is its amazing tire clearance.
• RockBrawler bumpers are shipped as BARE STEEL

Poison Spyder Brawler MID Front Bumpers

From $538.99

• The Poison Spyder Wrangler front bumper ships in Bare steel
• These Jeep front bumpers are constructed of 3/16 inch plate steel
• Mid-width high clearance bumper
• Ends extend far enough to protect the lower corner of the JK grille
• Features recessed buckets to mount the factory fog lamp
• Available with and without D-ring mounts

Poison Spyder Brawler Full Width Rear Bumpers

From $618.99

• The Poison Spyder Customs Brawler Wrangler front bumper is 3/16 inch plate steel
• CNC laser-cut and precision brake-formed into a low profile, high clearance design
• This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Jeep front bumper.

Poison Spyder Body Mounted Tire Carriers

From $768.99

See Price In Cart!

• Poison Spyder Jeep Spare Tire Carrier
• Bare steel
• CNC laser cut
• Fit up to 40 inch tire and wheel combo on this Jeep tire carrier
• Mount for Hi-Lift jack
• Includes all mounting hardware

Poison Spyder BFH Front Bumpers

From $319.99

See Price In Cart!

• This Poison Spyder Wrangler front bumper was literally "Built For the Hammers" with the best ground clearance, tire clearance and approach angle possible.
• It is no wider than the Jeep's frame rails
• CNC laser-cut from a single piece of high strength 3/16 inch plate steel
• These BFH Jeep front bumpers feature an integrated winch mount and one-piece design.
• At a mere 35 pounds, the BFH is among the lightest bumpers on the market.
• Even fully outfitted with Brawler Bar and Heavy Duty Shackle Tabs, the BFH weighs only 43 pounds!

Poison Spyder BFH Rear Bumpers

From $249.99

• The Poison Spyder Customs BFH™ Wrangler rear bumper is CNC laser-cut from high strength 3/16" plate steel, then precision brake-formed for an exact fit.
• Recovery Shackle Tabs are machined from 1" thick plate steel
• This Jeep rear bumper is intended for those hard-core wheelers who either wheel without a spare or strap the spare down into the bed of the Jeep.
• NOTE: Install requires cutting of stock frame rails!

Poison Spyder Brawler Full Width Front Bumpers

From $668.99

See Price In Cart!

• This Poison Spyder Brawler Wrangler front bumper constructed in the FULL Width size is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• These Jeep front bumpers ship as bare steel—it will need to be painted or powder coated prior to final installation.
• Works with stock JK fender flares.
• Includes recessed fog light buckets and high clearance recovery shackle tabs

Poison Spyder Tramp Stamps

From $49.99

• Poison Spyder Customs Tramp Stamps fit perfectly over the raised vent area in the center of the tailgate
• Textured black powder coat for durability
• Easily installs using the stock tire carrier mounting bolts.

Poison Spyder Rear Stinger Tire Carriers

From $768.99

• The Poison Spyder Rear Stinger Jeep rear bumper is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.
• By pulling the two upper pins,The Rear Stinger is basically a fold-down spare tire carrier.
• This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate.
• The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo.
• It also has an integrated license plate mount located in the center of the carrier.
• Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.:This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Wrangler rear bumper.

Poison Spyder BFH II Front Bumpers

From $549.99

See Price In Cart!

• Lightweight, high clearance "stubby" bumper design
• Made of 1.5" X .120" wall DOM tubing with 3/16" plate steel gussets
• SpyderShell Armor Coat semi-gloss black finish
• Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)
• High clearance recovery shackle tabs CNC machined from 1" thick plate steel

Poison Spyder DIY Rear Stinger Tire Carriers

From $648.99

• The Poison Spyder Rear Stinger Jeep rear bumper is designed for those who spend most of their time in the rocks and need a tire carrier that meets the challenge.
• By pulling the two upper pins,The Rear Stinger is basically a fold-down spare tire carrier.
• This part number is for the "DIY" Rear Stinger Tire Carrier without the Lower Mount Plate.
• The Tire Carrier includes an integrated skid plate with laser cut lightning holes and Spyder logo.
• It also has an integrated license plate mount located in the center of the carrier.
• Tabs for the lower straps and a loop for the upper strap provide a secure mount for the 3-Way Spare Tire Strap.:This product ships as bare steel—it will need to be painted or powder coated prior to final installation as your Wrangler rear bumper.

Poison Spyder Trail Stinger Bumpers

From $209.99

• Poison Spyder Customs Front Stingers are the original hard core rock crawling Wrangler front bumper.
• The Poison Spyder Stinger is simple, lightweight, functional and very affordable option for Jeep front bumpers.
• Poison Spyder Stingers do NOT include winch mounting provisions, but they will work with any manufacture's winch mount plate
• This product ships as bare steel—it will need to be painted or powder coated prior to final installation

Poison Spyder RockBrawler Bumpers

From $408.99

• This Poison Spyder Wrangler front bumper is fabricated from 3/16 inch plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
• The ends of the Jeep front bumpers extend far enough to protect the lower corner of the grille, but not far enough to hinder tire clearance or tire access to vertical obstacles.
• The two D-ring shackle mounts are CNC-machined from 1 inch plate steel to provide brute strength for the most demanding recovery operations.
• Accepts most major manufacturer's winches up to 15,000 lbs. capacity
• Recessed light mounts are provided for retention of the factory fog lamps or aftermarket off-road lamps

Poison Spyder Front Comp Stingers

From $229.99

• Poison Spyder Customs Front Stingers are the original hard core rock crawling Wrangler front bumper.
• The Poison Spyder Stinger is simple, lightweight, functional and very affordable option for Jeep front bumpers.
• Poison Spyder Stingers do NOT include winch mounting provisions, but they will work with any manufacture's winch mount plate
• This product ships as bare steel—it will need to be painted or powder coated prior to final installation.

Poison Spyder 3-Way Spare Tire Straps

From $79.99

• Designed for Poison Spyder tire carrier
• Ratchet strap design
• Built for rigorous wheeling

Poison Spyder Rear Bumper Brace Kits

From $49.99

• 3/16 inch steel plate
• Gussetted brace

Poison Spyder Bruiser Front Bumpers

From $799.99

• Compact design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Recessed winch mount
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light mounts accept LED cube lights

Poison Spyder Bruiser Rear Bumpers

From $749.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Multi-faceted high clearance design
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED cube lights

Poison Spyder Crawler Front Bumpers

From $769.99

• Compact, multi-faceted design protects lower grille corners while giving tires plenty of clearance and access to climb obstacles
• Large radius bends for strength and great looks
• Brawler Bar made of DOM tubing with tube gussets
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed light buckets accept OE fog lamps or Rigid Industries Dually's by use of adapter plate (sold separately)

Poison Spyder Frame Mounted Tire Carriers

From $949.99

• Frame mounted for strength without stress to body or bumper
• Single-action opens and closes with Jeep’s tailgate
• Compatible with Crawler™ and Bruiser™ series rear bumpers
• Concealed heavy duty pivot with tapered roller bearings
• SpyderShell™ Armor Coat finish with 5-Year Warranty

Poison Spyder Crawler Rear Bumpers

From $749.99

• Compatible with Poison Spyder Frame Mounted Tire Carrier
• Large radius bends and die-formed features
• Integrated Class III Tow Hitch
• SpyderShell™ Armor Coat semi-gloss black finish
• Recessed mounts for LED backup lights