Welcome Guest
SHOP JEEP PARTS
- Home
- Bumpers, Tire Carriers & Winch Mounts
- Front Bumpers
Smittybilt XRC Front Bumpers
Smittybilt XRC Front Bumper w/Winch Plate
4.5
4.5
(4)
From $459.99
Ships Free
- This Smittybilt XRC Jeep front bumper comes in a two stage textured matte black finish
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- Rear bumpers available with and without tire carrier
- The must have Wrangler front bumper
- California Residents: WARNING
Smittybilt XRC Bumper Packages
Smittybilt XRC Bumper Package
5.0
5.0
(1)
From $604.98
- This Smittybilt XRC Jeep front bumper comes in a two stage textured matte black finish
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- Rear bumpers available with and without tire carrier
- The must have Wrangler front bumper package
- California Residents: WARNING
Smittybilt SRC GEN2 Front Bumpers
Smittybilt SRC GEN2 Front Bumper
4.0
4.0
(1)
From $599.99
- Welcome to the Smittybilt SRC Gen2 Front Bumper for Jeep
- Solid d-ring and jack point mount - welded on the inside and out!
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2 inch 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16 inch cold rolled steel
- Towable D-ring mounts
- Two-stage textured matte black powdercoat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty: Great choice for a Wrangler front bumper
- California Residents: WARNING
Fab Fours Vengeance Front Bumpers
Fab Fours Vengeance Front BumpersFrom $1,399.99
- These fab Fours Jeep front bumpers are available in 2 Stage Black Powder Coat or Bare Steel
- Overall design and fit is High and Tight to the contours of the vehicle
- The Vengeance Series front bumper is sensor compatible
- Allows for an integrated 20 inch LED light bar in the center (light bar not included)
- Mounting options on each side for (2) 2x2 Dually lights to give you maximum LED light coverage
- Lower cutout to provide airflow to intercoolers
- Complete bolt-on front bumper w/ provided brackets that tie directly to the frame
- Sensors optimized for vehicles with suspension lifts - stock height trucks may require tuning the sensor mount and will require special care
- Available in a no guard or pre-runner guard option as a Wrangler front bumper
- California Residents: WARNING
Smittybilt SRC Front Bumpers
Smittybilt SRC Front Bumper
4.8
4.8
(22)
From $269.99
Ships Free
- This Smittybilt Jeep front bumper is a durable 2 inch x .120 inch wall tube. Coated in a textured black powder coat
- A pre runner style bumper that includes mounts for offroad lights
- This Wrangler front bumper mounts directly to your vehicle.
- California Residents: WARNING
ARB Deluxe Winch Front Bumpers
ARB 4x4 Accessories Deluxe Winch Front Bumpers
4.0
4.0
(1)
From $807.50
- ARB Jeep front bumpers offer maximum protection with durable steel construction
- ARB's winch front bumper for Jeep is loaded with features aimed at making remote area travel safe
- No other bumper offers the same degree of vehicle integration and functionality.
- Wrangler front bumper includes: tow points, antenna mounts,light mounts
- California Residents: WARNING
Poison Spyder Brawler Full Width Front Bumpers
Poison Spyder Customs Brawler Full Width Front BumpersFrom $669.99
Ships Free
- This Poison Spyder Brawler Wrangler front bumper constructed in the FULL Width size is fabricated from 3/16" plate steel, CNC laser-cut and precision brake-formed into a low profile, high clearance design.
- These Jeep front bumpers ship as bare steel—it will need to be painted or powder coated prior to final installation.
- Works with stock JK fender flares.
- Includes recessed fog light buckets and high clearance recovery shackle tabs
- California Residents: WARNING
Fab Fours Front Grumper Bumpers
Fab Fours Grumper Winch BumperFrom $1,699.99
- This Fab Fours Jeep front bumper has removable inserts for customization options
- Provides greater tire clearance
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring mounts that hold up to 7/8 shackle
- 11-gauge steel construction
- This Wrangler front bumper is 100% Made in the USA
- California Residents: WARNING
Smittybilt XRC Atlas Front Bumpers
Smittybilt XRC Atlas Front Bumper
4.1
4.1
(7)
From $699.99
- This Smittybilt XRC Atlas Jeep front bumper comes in a two stage textured matte black finish
- Innovative 3-piece design
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- The must have Wrangler front bumper
- California Residents: WARNING
Rampage Recovery Front Bumpers
Rampage Recovery Front Bumper with Stinger
4.4
4.4
(8)
From $425.99
Ships Free
- Rampage Recovery Jeep front bumpers come in Black powder coat
- Custom welded Shackle mounts with 3/4 shackle d-rings on this Wrangler front bumper help in recovery
- 3/16 inch steel plate design
- Two 4 inch light openings (Lights sold separately)
- California Residents: WARNING
Smittybilt XRC Rock Crawler Winch Bumpers
Smittybilt XRC Front Bumper
4.6
4.6
(11)
From $429.99
Ships Free
- Smittybilt XRC Rock Crawler Jeep front bumper comes in a two stage textured matte black finish
- Lower design winch plate allowing greater air flow
- Manufactured from 3/16 inch cold rolled steel
- Stinger is 1.75 inch tubing
- Bumper bolts directly to your vehicle
- Two 3/4 inch d-ring mounts
- 5 year limited warranty
- Accepts up to two 9 inch lights
- The must have Wrangler front bumper
- California Residents: WARNING
Body Armor 4X4 Front Bumpers
Body Armor 4x4 Front Bumper
4.3
4.3
(3)
From $399.99
Ships Free
- Body Armor 4x4 Jeep front bumpers are covered in a textured Black powder coat finish
- All Wrangler front bumpers are constructed of 3/16 inch steel plate
- Integrated winch mount and 4.5 inch light pockets
- California Residents: WARNING
Smittybilt Front Tube Bumpers
Smittybilt Front Bumper
4.3
4.3
(4)
From $139.99
Ships Free
- Smittybilt tube Wrangler front bumpers are available in Black Powder Coat and Stainless Steel
- One-piece design
- Robotically welded for extreme durability
- Pre-cut vertical uprights for a signature look
- 5-year limited warranty
- Great option for a Jeep front bumper
- California Residents: WARNING
Warn Elite Series Front Bumpers
Warn Elite Series Front Bumpers
4.2
4.2
(6)
From $674.97
Ships Free
- Warn Elite Series Jeep front bumpers are covered in a Black powder coat wrinkle finish
- Ends are tapered for increased approach angles
- Welded eyelets to mount D-shackles
- Minimal drilling and cutting required to install this Wrangler front bumper
- California Residents: WARNING
Smittybilt SRC Classic Rock Crawler Front Bumpers
Smittybilt SRC Classic Rock Crawler Front Bumper
4.0
4.0
(8)
From $154.99
Ships Free
- The Smittybilt Wrangler front bumper is covered in a Two-stage textured matte black powdercoat finish
- This Jeep front bumper is a 1/4 inch steel plate design
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
Pro Comp Crawler Bumpers
Pro Comp Suspension Procomp Jeep Crawler Front Bumper
3.3
3.3
(4)
From $90.99
Ships Free
- Gloss Black powder coat finish
- Constructed with 1/4 inch plate steel
- Designed for high departure and approach angles
- California Residents: WARNING
Road Armor Stealth Series Bumpers
Road Armor Front Stealth BumperFrom $1,327.99
- Proudly made in Texas, USA
- Hot rolled and laser cut 3/16 inch Plate Steel
- 1/4-inch-thick internal mounting brackets and gussets
- all guard tubing is .120-wall
- 5 Stage Powdercoat Finish - Highly scratch resistant
- Lights are not included
- Combat Proven and Trusted by the United States Military, life time guarantee against breakage
- California Residents: WARNING
Warn Rock Crawler Front Bumpers
Warn Rock Crawler Front Bumper
4.7
4.7
(3)
From $337.99
Ships Free
- Warn Black powder coat Rock Crawler Jeep front bumper
- Tough and durable
- Ends are tapered for increased approach angles
- Welded eyelets to mount D-shackles
- Pre-drilled holes to mount lights
- This Wrangler front bumper is a direct bolt on
- California Residents: WARNING
N-FAB R.S.P. Pre-Runner Front Bumpers
Nfab RSP Replacement Front BumperFrom $601.01
- N-Fab Jeep front bumpers standard color is Black powder coat
- Welded all 1 piece construction for strength & longevity (Non Modular)
- No cutting or drilling required
- Made In The USA!
- Wrangler front bumper all bolt on design that wont flex
- California Residents: WARNING
Addictive Desert Designs Stealth Fighter Front Bumpers
Addictive Desert Designs Stealth Fighter Front BumpersFrom $2,304.72
- Addictive Desert Designs Wrangler front bumper includes:winch mount, tow hooks, flush mount for cube lights and stainless steel hardware
- Jeep front bumpers are direct fit-No cutting or welding
- Fits up to a 12k lb. winch, comes with standard flat ends and bolts directly to the frame without any interference to airbag sensors.
- Tow Hooks allow for ease of towing, as well as recovery.
- California Residents: WARNING
Rampage Double Tube Front Bumpers
Rampage Double Tube Front Bumper
4.7
4.7
(3)
From $160.99
Ships Free
- Rampage Jeep front bumpers are available in Polished, Marine Grade Stainless or Black Powder Coat
- No rusting, flaking or peeling - guaranteed on Polished Stainless!
- Euro Grille Guard can be used with Tube bumper or factory Wrangler front bumpers
- California Residents: WARNING
ARB Combo Bull Bars
ARB 4x4 Accessories Combo BarFrom $807.50
- ARB Jeep front bumpers in textured Black powder coat finish
- Accepts Wrangler front bumper factory recessed fog lamps
- This front bumper for jeep includes:Tow points
- Antenna mounts: Light mounts:Recessed indicators
- California Residents: WARNING
Rock-Slide Engineering Rigid Series Front Bumpers
Rock Slide Engineering Full Front Bumper
4.3
4.3
(3)
From $999.99
- Black powder coat aluminum
- Available with 20 inch center light bar pocket
- Light mounts
- With and without winch mount
- California Residents: WARNING
Rugged Ridge XHD Front Bumpers
Rugged Ridge Front Bumper
5.0
5.0
(5)
From $499.99
Ships Free
- Rugged Ridge XHD Wrangler front bumper system offers an affordable design allowing you to customize your Wrangler front bumper
- Availabe in winch and non winch styles
- These Jeep fromt bumpers are available in Black powdercoat or polished stainless steel
- Multiple bolt on accessories available
- California Residents: WARNING
468 Results Found
SORT BY
On Sale
Smittybilt XRC Gen2 Front Bumper with Winch Plate (Black) - 76807
Smittybilt XRC Gen2 Front Bumper with Winch Plate (Black) - 76807
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- 3/16-inch cold rolled steel
- Two-stage textured matte black finish
- 1.75" .120 wall kickers offers fender-to-fender coverage
- PP+TPO slip strips – the ultimate for rock crawling, provides 5/16" additional damage protection
- Max solid D-ring and jack point mount welded on the inside and out
- OE fog light ports (Lights not included)
- Smittybilt Advantage Lifetime Warranty
- California Residents: WARNING
$499.99
On Sale
Smittybilt SRC Gen2 Front Bumper (Black) - 76724
Smittybilt SRC Gen2 Front Bumper (Black) - 76724
4.0
4.0
(1)
- 07-Current Wrangler JK, 2 & 4 Door
- New max solid d-ring and jack point mount - welded on the inside and out
- Aggressive design for with raised corners for better entry and exit angles for the most extreme conditions
- Fender to fender protection
- 2" 120 Wall over rider and kickers
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- O.E. fog light provision
- Manufactured from 3/16" cold rolled steel
- Towable D-ring mounts
- Two-stage textured matte black powdercoat finish with 5-year limited warranty
- Smittybilt Advantage limited lifetime warranty
- California Residents: WARNING
$499.99
Tax Paid
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) - 76892
Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes (Black) - 76892
4.1
4.1
(7)
- 07-Current Wrangler JK, 2 & 4 Door
- Innovative 3-Piece Design
- Lower Design Winch Plate Allowing Greater Air Flow
- Two Stage Textured Matte Black Finish
- Manufactured From 3/16 “ Cold Rolled Steel
- Bumper Bolts Directly To Your Vehicle
- Two 3/4 Inch D-Ring Mounts
- 5 Year Limited Warranty
- If Using Smittybilt Tow Bar#87450 You Will Need To Use Tow Bar Adapter S/B#87451
- California Residents: WARNING
$699.99
Tax Paid
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) - 76721
Smittybilt SRC Front Grille Guard Bumper with D-ring Mounts (Black) - 76721
4.8
4.8
(16)
Ships Free
- 87-06 Wrangler TJ/YJ
- Textured black powder coat
- 63" x 15" x 13"
- Four tabs to mount lights
- Wide opening allows for winch installation
- 1/4" thick custom mounting brackets
- Welded d-ring tabs
- Durable 2"x.120" wall over built
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
$269.99
Poison Spyder Customs Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Black) - 17-64-020DBTP1
Poison Spyder Customs Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Black) - 17-64-020DBTP1
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Provides the highest ground and tire clearance possible in a full width JK bumper
- Extends to the full width of the stock flares, to integrate with them cleanly while protecting them from trail hazards
- Includes DOM tubular Brawler Bar, recessed fog light buckets and high clearance recovery shackle tabs
- Black SpyderShell Armor Coat finish carries a 5-year Limited Warranty
- California Residents: WARNING
$1,499.99
Tax Paid
Smittybilt SRC Gen2 Front Bumper Package (Black) - BMPRPKG2.1
Smittybilt SRC Gen2 Front Bumper Package (Black) - BMPRPKG2.1- 07-Current Wrangler JK, 2 & 4 Door
- Textured black powder coat
- OE fog light provision
- Lower design winch plate allows greater air flow and rated to accommodate up to 12k winch
- 2"x.120" wall 2" Class III Receiver
- New max solid d-ring and jack point mount - welded on the inside and out
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
- California Residents: WARNING
$1,199.98
Tax Paid
Smittybilt XRC Rock Crawler Winch Front Bumper with D-ring Mounts (Black) - 76810
Smittybilt XRC Rock Crawler Winch Front Bumper with D-ring Mounts (Black) - 76810
4.5
4.5
(4)
Ships Free
- 84-01 Cherokee XJ
- Textured black
- 3/16 cold rolled steel
- One-piece welded design
- Raised corners for better entry and exit
- Built-in winch plate to accommodate up to a 12k winch
- Optional Bull Bar sold separately as part number 76811
- 5-year limited warranty
- California Residents: WARNING
$459.99
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 17-64-020-DBT
Poison Spyder Brawler Full Width Front Bumper with Brawler Bar and Shackle Tabs (Bare) - 17-64-020-DBT
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Bare Steel
- Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares
- CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- "Brawler Bar" made of 1.5" X .120" wall DOM tubing with 1.25" OD X .120" wall DOM tube gussets
- High clearance recovery shackle tabs CNC machined from 1" thick plate steel
- California Residents: WARNING
$769.99
Tax Paid
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) - 76800
Smittybilt XRC Rock Crawler Winch Front Bumper with Grill Guard and D-ring Mounts (Black) - 76800
4.7
4.7
(6)
Ships Free
- 97-06 Wrangler TJ/LJ
- 2-stage textured black powder coat
- Degree approach angles and raised corners
- 3/16" cold rolled steel
- Stinger is 1.75" tubing
- Accepts up to two 9" lights
- Bumpers bolt directly to your vehicle
- 5-year limited warranty
- California Residents: WARNING
$429.99
Genuine Packages Smittybilt SRC Front Bumper and Winch Package (Stainless Steel) - TJSPECIAL05
Genuine Packages Smittybilt SRC Front Bumper and Winch Package (Stainless Steel) - TJSPECIAL05- 97-06 Wrangler TJ/LJ
- 2 tabs for light mounting
- Wide opening allows for winch installation
- 1/4" thick custom mounting brackets
- Welded d-ring tabs
- XRC 9.5 GEN2 Winch
- Rated line pull: 9,500 lbs. single-line
- Gear ratio: 161.28:1
- Waterproofing: IP67 rating
- Fairlead: 4-way roller
- Cable: 93.5� wire cable 5/16" diameter
- California Residents: WARNING
$569.98
Tax Paid
Fab Fours Front Full Width Grumper (Black) - GR1010-1
Fab Fours Front Full Width Grumper (Black) - GR1010-1- 07-Current Wrangler JK, 2 & 4 Door
- 2 Stage Matte Black Powder Coat
- Removable inserts for customization options
- Provides greater tire clearence
- Winch Ready-Accepts Warn Zeon Winches
- Integrated D-Ring mounts that hold up to 7/8 shackle
- 11 gauge steel construction
- 100% Made in the USA
- California Residents: WARNING
$1,729.99
Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs (Bare) - 17-64-020-D
Poison Spyder Brawler Full Width Front Bumper with Shackle Tabs (Bare) - 17-64-020-D
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Bare Steel
- Full-width, multi-faceted design protects lower grille and extends to outer edge of stock flares
- CNC laser cut from 3/16" plate steel, precision brake-formed for a perfect fit
- Recessed light buckets accept OE fog lamps or Rigid Industries Duallys by use of adapter plate (sold separately)
- High clearance recovery shackle tabs CNC machined from 1" thick plate steel
- California Residents: WARNING
$669.99
Rampage Full Width Front Recovery Winch Mount Bumper with Stinger (Black) - 88510
Rampage Full Width Front Recovery Winch Mount Bumper with Stinger (Black) - 88510
4.3
4.3
(3)
Ships Free
- 07-Current Wrangler JK, 2 & 4 Door
- Textured black finish
- Includes stinger
- Custom welded shackle mounts with 3/4" shackle d-rings
- Lights sold separately
- California Residents: WARNING
$661.99
Tax Paid
Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring (Black) - 76740D
Smittybilt SRC Classic Rock Crawler Front Bumper with D-ring (Black) - 76740D
4.3
4.3
(7)
Ships Free
- 87-06 Wrangler TJ/YJ
- 76-86 CJ
- Two stage matte black powder coat finish
- Manufactured from 3/16� cold rolled steel plate
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
$174.99
Genuine Packages Smittybilt XRC Front and Rear Bumper with Tire Carrier (Black) - XJSPECIAL02
Genuine Packages Smittybilt XRC Front and Rear Bumper with Tire Carrier (Black) - XJSPECIAL02- 84-01 Cherokee XJ
- Textured black
- 3/16" cold rolled steel
- Optional Bull Bar sold separately part number S/B76811
- One-piece welded design
- Raised corners for better entry and exit under the most extreme conditions
- Solid mount d-rings
- XRC 9.5 GEN2 Winch
- Rated line pull: 9,500 lbs. single-line
- Gear ratio: 161.28:1
- Waterproofing: IP67 rating
- Fairlead: 4-way roller
- Cable: 93.5� wire cable 5/16" diameter
- California Residents: WARNING
$1,529.96
Tax Paid
Smittybilt 3" Front Tube Bumper with Hoop (Black) - JB44-FT
Smittybilt 3 Inch Front Tube Bumper with Hoop (Black) - JB44-FT
Ships Free
- 87-06 Wrangler TJ/YJ
- 76-86 CJ
- Textured black powder coat
- Expertly robotically welded
- Two center light tabs
- Dense zinc treated undercoating
- Dual powdercoat painted finish
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
$199.99
Rock Slide Engineering Rigid Full Front Bumper with Bull Bar - FB-F-103-JL
Rock Slide Engineering Rigid Full Front Bumper with Bull Bar - FB-F-103-JL- 2018-Current Wrangler JL, 2 & 4 Door
- Includes bull bar
- Winch plate not included
- 4" light pockets for factory fog lights and recovery points
- Powder coat textured black
- Constructed of 3/16" steel
- Made in the USA
- California Residents: WARNING
$1,349.99
Pro Comp Jeep Crawler Front Bumper with D-Rings (Black) - 66162
Pro Comp Jeep Crawler Front Bumper with D-Rings (Black) - 66162
3.0
3.0
(1)
Ships Free
- 87-Current Wrangler TJ/YJ
- 76-86 CJ7
- Gloss black powder coat finish
- Constructed with plate steel
- Designed for high departure and approach angles
- D-rings incuded
- Drilling required on 1997 to 2000 TJ
- Gloss black powder coat finish
- California Residents: WARNING
$149.99
Rock Slide Engineering Rigid Full Front Bumper - FB-F-102-JL
Rock Slide Engineering Rigid Full Front Bumper - FB-F-102-JL
Ships Free
- 2018-Current Wrangler JL, 2 & 4 Door
- Bull bar and winch plate not included
- Recovery points and 4" light pockets for factory fog lights
- Powder coat textured black
- Constructed of 3/16" steel
- Made in the USA
- California Residents: WARNING
$1,149.99
Rugged Ridge Spartacus Front Bumper - 11544.21
Rugged Ridge Spartacus Front Bumper - 11544.21
Ships Free
- 18-Current Wrangler JL, 2 & 4 Door
- Satin black finish
- 11-gauge stamped steel
- Winch plate (part number 11543.13) sold separately
- Lightweight alternative to many of the heavier aftermarket steel bumpers
- California Residents: WARNING
$699.99
ARB Deluxe Bar (Black) - 3450230
ARB Deluxe Bar (Black) - 3450230- 07-Current Wrangler JK, 2 & 4 Door
- Integrit Texture
- Integrated winch platform
- Incorporated recovery points, Hi-Lift lifting points and auxiliary light mounting provisions
- Added protection and collision air bag compati
- California Residents: WARNING
$953.80
Tax Paid
Smittybilt Front Bumper with Hoop (Stainless Steel) - JB44-FS
Smittybilt Front Bumper with Hoop (Stainless Steel) - JB44-FS
Ships Free
- 87-06 Wrangler TJ/YJ
- 76-86 CJ
- Polished stainless steel
- Dense zinc treated undercoating
- Expertly robotically welded
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- License plate mounting bracket sold seperately
- California Residents: WARNING
$299.99
Tax Paid
Smittybilt 3" Front Tube Bumper with Hoop (Black) - JB44-F
Smittybilt 3 Inch Front Tube Bumper with Hoop (Black) - JB44-F
Ships Free
- 87-06 Wrangler TJ/YJ
- 76-86 CJ
- Gloss black powder coat
- Expertly robotically welded
- Two center light tabs
- Dense zinc treated undercoating
- Bumpers bolt directly to your vehicle
- Requires no drilling or modifications
- 5-year limited warranty
- California Residents: WARNING
$199.99
Rock Slide Engineering Rigid Full Front Bumper with Winch Plate - FB-F-101-JL
Rock Slide Engineering Rigid Full Front Bumper with Winch Plate - FB-F-101-JL
Ships Free
- 2018-Current Wrangler JL, 2 & 4 Door
- Bull bar not included
- Integrated winch plate included
- 4" light pockets for factory fog lights and recovery points
- Powder coat textured black
- Constructed of 3/16" steel
- Made in the USA
- California Residents: WARNING
$999.99
Rock crawling is a trial like no other. Out on the hairiest off-road trails, you need every bit of assurance that your Jeep will make it through. Even with the best handling and finest precision, bumps and close scrapes are inevitable and require special preparations to handle. You need the best engineering and design you can get. You need full front bumpers from the best in the aftermarket, and that�s exactly what we offer at 4WD.com. From Pro Comp and Smittybilt to Poison Spyder and Rugged Ridge, find top-grade full width bumpers that replace your OEM front bumper and integrate with your rig�s body for thorough protection from rocks and road debris.
Triumph on the Trail with a High-Quality Bumper
In contrast with other front bumpers, full width models extend out to the fender flares on your Jeep’s front end, granting greater coverage from trail hazards. This protection is further boosted with built-in grille guards, and many models also feature winch or light mounts, both just as vital out on the trail. Durable cold-rolled steel is precisely shaped with CNC welding and laser cutting for an ideal direct fit that is easily bolted onto your Jeep’s body, including extra clearance for lifted models. A new front bumper also elevates your rig’s visual style, both in itself and by protecting the body. Our inventory offers many options to choose from in design and finish to nail the look.
Dedicated to Customer Service
To make replacing your front bumper easier, we offer not only excellent aftermarket bumpers but also direct fits for Jeeps of various years and models; we can help you pick the right product for your needs, or you can use the vehicle select tool to narrow your search. Moreover, everything in stock at 4WD.com comes at affordable prices backed by our Best Price Guarantee: if you find a competitor selling the same item for less, let us know within 90 days of your purchase and we’ll refund you the difference. We know what jeepers need - let us help ensure your ride is fully prepared for the trail.
Triumph on the Trail with a High-Quality Bumper
In contrast with other front bumpers, full width models extend out to the fender flares on your Jeep’s front end, granting greater coverage from trail hazards. This protection is further boosted with built-in grille guards, and many models also feature winch or light mounts, both just as vital out on the trail. Durable cold-rolled steel is precisely shaped with CNC welding and laser cutting for an ideal direct fit that is easily bolted onto your Jeep’s body, including extra clearance for lifted models. A new front bumper also elevates your rig’s visual style, both in itself and by protecting the body. Our inventory offers many options to choose from in design and finish to nail the look.
Dedicated to Customer Service
To make replacing your front bumper easier, we offer not only excellent aftermarket bumpers but also direct fits for Jeeps of various years and models; we can help you pick the right product for your needs, or you can use the vehicle select tool to narrow your search. Moreover, everything in stock at 4WD.com comes at affordable prices backed by our Best Price Guarantee: if you find a competitor selling the same item for less, let us know within 90 days of your purchase and we’ll refund you the difference. We know what jeepers need - let us help ensure your ride is fully prepared for the trail.