Trail-Gear is the originator of forged high steer arms for Toyota Pickups and 4Runners. Each arm is pressure Forged from 8620 tool steel, these arms are incredibly strong. All mounting surfaces are machined including the split washer surface and the tie rod tapered holes, ensuring correct and positive contact between parts, preventing knuckle studs and tie rod ends from coming loose. Arms are angle compensated so that the rod ends ride at the factory designed 90 degree angle.
This drag link is made from .250in. wall DOM 1.25in. tubing, precision tapped, and features a left side thread mark. Each rod is test fitted to ensure that rod ends thread in with correct fit. Powder coat black finish.
This kit will take almost all the fabrication work out of mounting your Rock Assault? Double Ended Ram and Clevis Kit to almost any axle housing. The main support tube is pre-bent and can be trimmed to size and coped on the ends for a custom fit. The formed mounting plates are not welded to the tube so you can move them to the left or right to center the ram on the axle. We include a support tube, but on certain axles additional gussets may be required. Product is shipped unpainted.
If you're running a high volume/pressure pump your system is generating much more heat then the stock system. Fluid overheating can cause damage to steering pump and steering box. Installing a oil cooler in front of the radiator is the best way to prevent this over heating. Our cooler features a fin area of 9 inch X 8 inch and does a great job of keeping the steering fluid temps under control in all conditions. Mounting kit is included with the oil cooler.