Sign Up for Email Offers
*Excludes tires, wheels, and CRO, OAI, and JEP lines, and shipping to Alaska.
Truck & Jeep Parts Home » Shop by Brand » Warrior
Warrior Products Leaf Spring Shackle Bushings are built to stringent standards for strength, performance and durability.
A perfect way to relocate your license plate while adding a custom look, this License Plate Bracket is constructed of 11-guage HRPO steel plate and comes complete with all of the mounting hardware for an easy installation.
Warrior Products License Plate Mounts are a perfect way to relocate your license plate while adding a custom look, these License Plate Mounts are constructed of HRPO steel plate and comes complete with all of the mounting hardware for an easy installation.
Warrior Products Side Plates protect the rocker panel area below the door and enhance the appearance of the vehicle too.
The Warrior Rock Crawler Bumper with brush guard features a one-piece welded construction with inclusive grille guard, and is coated in a stylish black finish.
These Rear Bumpers from Warrior Products™ are constructed of high quality steel with a rugged Black powder coated finish and are available with or without a standard 2 receiver.
Warrior Products Removable Spare Tire Carriers have a quick release on/off head in which to load and/or remove the tire. Plus, there’s an additional quick release head at its base that allows the entire unit to be removed in seconds!
For those Wrangler owners who have removed their rear mounted spare tires, this 3rd brake light bracket bolts into existing holes and provides a quality LED third brake light. For JK owners, the pictured center section is available to fill the remaining factory holes, and also accepts the rubber grommet from the factory 3rd brake light wiring.
Warrior Products Economy Suspension Lift Kits are built to stringent standards for strength, performance and durability.
Warrior Products Rear Suspension Leveling Kits are built to stringent standards for strength, performance and durability.
Our Off-Road Exhaust kit relocates the muffler to the straight section of the exhaust mid-pipe, and comes with a high-clearance tailpipe. This 2.5" diameter muffler includes a heat shield to protect the fuel evap canister, and to keep the heat off of the vehicles floor.
Make your Jeep more versatile by adding a Warrior Products Receiver Hitch.
Knight Guard Side Bars from Warrior are constructed of 3 round tubing and powder coated black for rugged protection and good looks.
Warrior Products Knight Guard Nerf Bars span the full length of the vehicle, for wheel-to-wheel protection of the rocker panel. Constructed of 3” round tube and black powder-coated, each bar acts as an entry step into the vehicle as well.
Get the ease, convenience, and accessibility of quality Jeep side steps with Warrior’s line of premium Knight Guard single drop steps, available in stainless steel or black finishes.
Warrior Products Step Plates are constructed of heavy-guage diamond plate aluminum tradbrite, our plate provides a safe, non-skid surface in which to stand atop tubular product.
For the true off-road utilitarian looking for a sporty, rugged overhead storage solution, Warrior’s lineup of Cargo Racks is designed with the off-road enthusiast in mind.
Warrior Products Safari Sport Rack Light Mounts offer a convenient mounting location. Fits Safari Sports Rack and is black powdercoated.
Warrior Products Safari Sports Racks are a black powder coated steel constructed rack that will handle up to 400 pounds of cargo during highway use and up to 150 pounds of cargo during off-road use.
Warrior Products Adventure Racks add additional storage to vehicles with limited storage capacity. Positioned above the vehicle’s spare tire, this rack has a weight capacity of 200 lbs. Ideal for camping equipment, coolers or anything else you need along the trail.
For a quieter, more aerodynamic ride, Warrior Products Air Dams are designed to redirect wind over and above any of our popular rack series.
Warrior Products Shovel & Axe Mount brackets are designed to fit our Safari & Outback Rack baskets, to carry a standard shovel and/or axe atop the vehicle.
Warrior Products Safari Sports Rack Shovel and Axe Mounts offers a convenient mounting location. Fits Safari Sports Rack and is black powdercoated.
Warrior Products Adventure Racks are a bolt-on kit that has a weight capacity of 200 pounds and is ideal for hiking equipment, tents, and coolers.
H60.5mm shocks, featuring a nine-stage valve system and a self-lubricating polished chrome piston.
Since the factory stem-style shock mounts are notorious for breaking, these steel-formed Warrior Products Shock Mount Conversions allow the conversion of the post mount to an eye mount, for greater durability and functionality.
Designed to compliment our Universal Shock Mount, these versatile brackets allow maximum flexibility when rebuilding your suspension system.
To replace worn or broken pins, these solid replacement shock absorber cross pins are machined from steel round stock and offer much greater strength than standard round tubing pins. Warrior Products Shock Absorber Cross Pins are zinc coated for greater rust prevention and lifespan.
Warrior Products Leaf Spring Shims are designed to be permanently attached to the leaf spring pack using the leaf’s cross-pin. The cross holes are counter-bored against the angled surface to ensure the cross-pin gets even clamping force across the spread of the pin’s top surface. Steel construction helps to keep the shims from breaking under heavy load conditions.
Warrior Products Frame Braces are designed to reinforce the notoriously cracking frame near the steering box, these Frame Braces are great to repair existing damage or to prevent it from occurring.
Warrior Products Greasable Bolt Kits have zerk fittings for ease of lubrication.
Warrior Products Transfer Case Lowering Kits lower your transfer case ensures proper driveline angles helping to eliminate drive line vibration.
Constructed of a form fitting, polycotton backed vinyl, Warrior Products tire covers fit specific tire sizes and complement our Breezer Tops. Become part of the Warrior team!
Warrior Products Tow Bars have a 5000 lb. towing capacity and a locking coupler designed for any universal 2” ball mount. Each Tow Bar is crafted from heavy-duty steel and powder-coated black for corrosion resistance and durability.
Warrior Products Cargo Hitch Racks provide another option to pile on extra gear. They can be easily mounted to and removed from any 2” receiver hitch.
Warrior Products Tow Bar Shackles are designed for use with our Collapsible Tow Bar, these heavy-duty Shackles come in either hammertone gray or gold zinc finishes. Made to replace the existing front shackles of the Jeep, they provide an effective alternative to bumper mounted attachment brackets.
Warrior Products Tow Bar D-Ring Adapters are designed for use with the Warrior Products Collapsible Tow Bar, these heavy-duty brackets are designed to attach to any bumper with d-ring mounts. While they were engineered around our Tow Bar, several other Tow Bars utilize a very similar design and therefore the adapter can be used with several brands of collapsible tow bars on the market.
Warrior Products Tow Bar Mounting Brackets are designed for use with either of the Warrior Products Tow Bars, these heavy-duty brackets are designed to attach to any non-factory steel bumper. They will work equally well on any flat surface of a vehicle as its mounting host.
Warrior Products D-Ring Shackles are designed to be an easy add-on to any surface strong enough to support the loads they will be used for.
Warrior Products Alumi-Rollers are designed to replace the steel rollers in your winch’s existing roller fairlead, Alumi-Rollers are cut from solid aluminum stock and CNC machined to a smooth finish. This smooth, low friction roller kit is ideal for use with a synthetic winch line upgrade.
Warrior Products Stinger Winch Mounts offer a combination of a stinger style brushguard with a protective grille hoop and is combined with an integrated winch mounting plate.
Warrior Products Winch Plates will fit most Aftermarket and factory bumper systems, and feature a lower mount point to clear the front grille as much as possible.
Warrior Products Hi Lift Jack Mounts allow the popular Hi-Lift Jack product to be mounted to the side of our Safari Rack’s cargo basket, or to any flat surface 3” or taller.
Warrior Products Hi-Lift Jack Mounts are for use with Safari Sports Rack. Offers convenient mounting location for your Hi-Lift Jack.
Warrior Products D-Ring Brackets include two 1/2? mounting holes which can be drilled to 9/16? easily for an even stronger mounting. No hardware is included in this set as every application will vary in size. Grade 8 bolts are recommended for use with these brackets or as an alternative brackets can be welded on if you choose.
Warrior products heavy duty differential skid plates can suck up the riggers of extreme off roading and protect your expensive differential components from damage.
Warrior Products Universal Brush Guards are designed to attach to any flat surface front bumper with a wide enough top surface. Manufactured using high quality steel, this one-piece welded guard is formed form 1 ½” round steel tubing, and provides protection when off-roading from shrubbery to the front grill and headlights.
Warrior’s Spare Tire Spacer allows an extra 2 of clearance for mounting larger spare tires, and as an added bonus, the bracket can be mounted in several positions that shift the tire location.
Warrior Products Spare Tire Spacers are designed to mount directly to the factory spare tire carrier, the spacer allows an extra 2” of clearance for mounting over size tires. This bracket has multiple location holes to allow it to be mounted in several different positions.
Warrior Products Pre Runner Light Bars host five 6 3/4? round lights and easily fold back when not in use. With the simple twist of a few knobs the support struts on the light bar can be slid rearward allowing the light bar to fold down out of harm’s way.
Warrior Products has been bringing quality Jeep Accessories to the hard-core, off-road market since 1992. Check out their full selection of Shackles here.
Warrior Products Leaf Springs are built to stringent standards for strength, performance and durability.
Warrior Products Add A Leaf Kits are an affordable way to lift the rear of your vehicle without creating more axle wrap and retaining good ride quality.
Warrior Products Control Arms are built to stringent standards for strength, performance and durability.
Warrior Products U-Bolt Kits are built to stringent standards for strength, performance and durability.
Warrior Products Sway Bar End Links are built to stringent standards for strength, performance and durability.
Warrior Products Coil Springs are built to stringent standards for strength, performance and durability.
Warrior Products has been bringing quality Jeep Accessories to the hard-core, off-road market since 1992. Check out their full selection of Leaf Spring Perches right here.
Warrior Products Shackle Reverse Systems are designed to eliminate poor handling characteristics, and help create a safer vehicle for all driving conditions. Simply moving the front leaf spring shackle to the rear of the same spring creates an amazing improvement in driveability.
Protect your leaf spring U-bolts with the Warrior Products Leaf Spring U-Bolt Skid Plates, designed with an innovative shock stud feature. The screw-in shock stud can be unscrewed and replaced if and when bent. This saves time and the need to replace the entire skid plate.
Warrior Products Shackle Frame Brackets are built to stringent standards for strength, performance and durability.
Warrior Products Spring Over Conversion Kits are a compilation of the necessary axle brackets to move a spring-under axle to spring over. The kit comes complete with spring perches, u-bolt plates, universal shock mounts, shock bolts, and coupling nuts. This kit has it all and works on most axle applications.
Warrior Products Sway Bar Link Kits are built to stringent standards for strength, performance and durability.
Warrior Products Sway Bar Disconnects will enhance the handling and ride quality of your vehicle and allow you more suspension travel when disconnected off road.
Warrior Products Track Bar Relocation Brackets are built to stringent standards for strength, performance and durability.
Designed to replace the original flares, Tube Flares mount into existing fender wells with minimal drilling. Constructed of 1-1/2” tubing, these beefy frames are a perfect complement to our Tube Doors. The flares top plate comes in three finishes to match other Warrior Body Armor.
Warrior Products Adventure Door Mirror Mounts are designed to bolt onto Warrior Adventure Doors to allow your doors to have a permanently mounted mirror. These brackets eliminate having to swap mirrors when you install or remove your tube doors.
Warrior Products Gas Tank Covers install over the stock gas tank for added protection from the elements.
Warrior Products Tailgate Covers conceal the entire surface area of the tailgate, and have cutouts around the door handle for ease of tailgate opening and operation.
Warrior Products Entry Guards protect the paint and finish of door jambs, under the door seals when closed. The treadbrite provides an excellent non-skid surface for safety.
Warrior Products Grab Handles can be useful in almost any application. There are 3 sizes to choose from as well as a direct replacement for Jeep CJ Dashboards.
Warrior Products Shifter Covers are a direct factory replacement to original mounting holes with no drilling required.
Replace your old dash with one of these heavy duty, custom units. Available in four different configurations and either a polished aluminum or black powder coat finish.
Warrior Products Dash Panel Overlays come in several versions to customize the vehicle’s dash. Constructed from sturdy aluminum and available in several finishes.
These sturdy steel grab handles provide a perfect replacement for the factory door handles.
Warrior Products Floor Boards cover the entire floor of the vehicle. If desired, the steel version can be modified for a complete replacement of the existing floor.
Warrior Products Receiver Extensions provide greater turn clearance when pulling trailers.
The Warrior Products Lockable Storage Trunk replaces the factory storage compartment in the rear tub of the JK Wrangler with a larger, stronger, more secure trunk.
Warrior Products Pitman Arms are built to stringent standards for strength, performance and durability.
Warrior Products Steering Box Braces provides extra rigidity by anchoring the bottom of the steering box to the opposing frame rail.
Warrior Products Load Resistor Kits cure any issues with fast blinking turn signals after installing LED Lights.
Warrior Products LED Tail Light Kits are flush-mount, grommet-mounted lights that will keep you from breaking stock tail lights after trail use.
Warrior Products LED Reverse Light Kits are flush-mount, grommet-mounted lights that will keep you from breaking stock tail lights after trail use.
Warrior Products LED Side Marker Light Kits feature a grommet style mount and include short wiring pigtails.
Warrior Products Steel Tail Light Boxes are a great replacement for your factory tail lights. Almost every trail use Wrangler has seen a broken plastic tail light at one time or another. This great solution will provide you with a strong steel replacement that accepts standard grommet-mounted tail lights and/or reverse lights.
Warrior Products Windshield Hinge Light Brackets allow the mounting of a driving/spot light to the windshield frame.
Warrior Products Light Brackets make it easy to mount off road lights to your Jeep.
Warrior Products Windshield Light Brackets allow an auxiliary light to be mounted to the windshield hinge.
Warrior Products Front Fender Covers sit atop the fenders and match the rest of your body armor accessories.
Warrior Mirror Relocation Brackets move your mirrors from the door to the windshield hinge.
Warrior Products Mirror Filler Plates cover the holes left when the door’s mirrors are removed and/or repositioned to the windshield frame.
This heavy duty steel step protects from wheel well to wheel well and includes polyurethane end caps. Powder coated in durable black and sporting an aluminum diamond plate non-skid entry step, this product is built to last.
Warrior Products Sideplates protect the rocker panel area below the door and enhance the appearance of the vehicle too.
Replace your Jeep's old, beat up gas tank skid plate with this factory replacement unit that is built to exceed factory specifications by using 12 gauge steel, jig welding, and Black Powder Coat for long lasting durability.
Warrior keeps it simple with tough-made, high quality body protection Jeep accessories that install onto your Jeep without hassle, and offer all the exterior protection you need.
Warrior Front Frame Covers protect the frame between the grille and front bumper, and compliment the rest of the vehicle’s trim accessories.
Warrior Products Rear Corners have a material thickness of 1/8? and not only provide structural support to the corner area, but enhance the appearance of the vehicle too.
Warrior Products Cowl Covers incorporate the hood vent and add decorative trim across the width of the hood up to the windshield’s glass.
Warrior Products Backplates cover the body beneath the tailgate, between the rear corners. Backplates are cut out to fit around hinges for ease of tailgate operation.
Warrior Products Windshield Hinges complement both interior and exterior product finishes.
Warrior Products Tailgate Hinge Covers replace the factory plastic hinge covers. When modifying any part of the tailgate area, the original plastic fasteners tend to break upon removal of the covers and/or are difficult to re-attach. These hinge covers offer greater interchangeability and add to the rugged look of the vehicle. THey are constructed of 16-gauge steel and finished in gloss-black powder-coat.
Warrior Products Roll Bar Combo Grips can hold a fire extinguisher and have one detachable Hand Grip. The Hand Grip Combo utilizes a triple safety strap system to make sure your extinguisher stays safely in place.
Warrior Products Adventure Door Limiting Straps work great to keep your Adventure Door or half door from opening too far. Velcro straps make adjustments quick and simple.
Designed to replace the vehicle’s full or half doors, Adventure Doors provide additional protection to front seat occupants while off roading. Adventure Doors mount into existing door hinges and come in two versions: our deluxe paddle handle or standard latch closure systems. Black powder-coated to provide a durable finish, these heavy-duty doors are ready for use
Warrior Products Adventure Door Mesh Kits help deter debris and wind from entering the vehicle. They also allow its driver to see obstacles through the door.
To go with all other hardcore Warrior products, their line of tube and mesh half doors are the ultimate open-air solution for finding the right Jeep doors.
Warrior Products Hard Top Quick Release Kits replace the 6 TORX bolts along the tub rail that hold the hardtop onto the Jeep. These quick release knobs allow you to easily prepare your hardtop for removal without tools.
Warrior Products Leaf Spring Accessories