Hanson Enterprise Bumpers use patented 45° forming for better approach and departure angles and are constructed of tough 3/16" thick hot rolled plate steel with 3/16" thick mounts and 1" thick high-yield steel clevis tabs. Front bumpers have a winch deck that is dropped 2" for better airflow and lower center of gravity, and they come with a 1/4" thick fairlead mounting plate that fits most planetary gear style winches. Rear bumpers incorporate a 2" receiver and an optional 1-3/4" diameter greasable spindle for holding a tire carrier. Mounting hardware and instructions included. Black powder coat.

Hanson Enterprise Bumpers use patented 45° forming for better approach and departure angles and are constructed of tough 3/16" thick hot rolled plate steel with 3/16" thick mounts and 1" thick high-yield steel clevis tabs. Front bumpers have a winch deck that is dropped 2" for better airflow and lower center of gravity, and they come with a 1/4" thick fairlead mounting plate that fits most planetary gear style winches. Rear bumpers incorporate a 2" receiver and an optional 1-3/4" diameter greasable spindle for holding a tire carrier. Mounting hardware and instructions included. Black powder coat.

The Hanson rear bumper is a strong, supportive 60" wide bumper that can be expanded upon with a tire carrier and cargo racks, even at a later time if needs change. A 2" receiver is incorporated into all the Jeep rears, as are the welded-on clevis tabs as well. If you think you may want to use a tire carrier down the road, be sure to order the bumper with the spindle already mounted as it is a hassle to add later.

Hanson Enterprise Bumpers use patented 45° forming for better approach and departure angles and are constructed of tough 3/16" thick hot rolled plate steel with 3/16" thick mounts and 1" thick high-yield steel clevis tabs. Front bumpers have a winch deck that is dropped 2" for better airflow and lower center of gravity, and they come with a 1/4" thick fairlead mounting plate that fits most planetary gear style winches. Rear bumpers incorporate a 2" receiver and an optional 1-3/4" diameter greasable spindle for holding a tire carrier. Mounting hardware and instructions included. Black powder coat.

The Hanson rear bumper is a strong, supportive 60" wide bumper that can be expanded upon with a tire carrier and cargo racks, even at a later time if needs change. A 2" receiver is incorporated into all the Jeep rears, as are the welded-on clevis tabs as well.

Rubicon Series Front Bumpers for XJ Cherokees and ZJ Grand Cherokees are winch ready, use patented 45 Degree Forming for better approach and departure angles, and are constructed of 3/16" thick hot rolled plate steel with 3/16" thick mounts and 1" thick high-yield steel Clevis Tabs. Winch Guard and Prerunner tubing is 1-3/4" diameter x .120 wall. There are cooling vents cut into the lower front face, and the winch deck is dropped 2" to allow for better airflow into the radiator and a lower center of gravity, and the deck also has a built-in recess to accommodate cooling fins and/or longer winch motors. Bumpers come with a 1/4" thick Fairlead Mounting Plate that fits most planetary gear style winches, all mounting hardware, and instructions.

Hanson Enterprise Rubicon Series Rear Bumpers offer the same quality materials, craftsmanship, and patented 45 Degree Forming Technology as their front bumpers. 3/16" thick, hot rolled plate steel with 3/8" thick mounting plates and 3/8" thick end caps provide the ultimate in protection while the 45 Degree Forming allows for better approach and departure angles when encountering obstacles off road. Also incorporated into the bumper are a 2" receiver and 1" thick high-yield steel Clevis Tabs for recovery. A trailer plug is located inside the bumper to protect it from damage.

Rubicon Series Front Bumpers for XJ Cherokees and ZJ Grand Cherokees are winch ready, use patented 45 Degree Forming for better approach and departure angles, and are constructed of 3/16" thick hot rolled plate steel with 3/16" thick mounts and 1" thick high-yield steel Clevis Tabs. Winch Guard and Prerunner tubing is 1-3/4" diameter x .120 wall. There are cooling vents cut into the lower front face, and the winch deck is dropped 2" to allow for better airflow into the radiator and a lower center of gravity, and the deck also has a built-in recess to accommodate cooling fins and/or longer winch motors. Bumpers come with a 1/4" thick Fairlead Mounting Plate that fits most planetary gear style winches, all mounting hardware, and instructions.

Available in a variety of configurations to suit your cargo carrying needs, Hanson Cargo Racks are constructed of 1" square tubing with .100" thick smooth aluminum flooring with strap attaching points under the lower frame tubes. Specifically designed to work with the Hanson Square Frame Tire/Cargo Carrier, predrilled holes are provided for many, but not every, cargo combination. Minor drilling may be required. Finished in durable black powder coat.

Carry Jerry Cans or small cargo on each side of the spare tire. Side Platforms have a 13" x 7" floor and a 12" high rear and side tube for cargo bracing. Attach them to the Tall Cargo Frame, part #CTF38P, not included

Hanson Rocker Guards use the same 45 Degree Forming Design as the Hanson Bumpers and are constructed of 3/16" steel with compound miter cut and capped ends. Mounting is done with 5/16" truss head machine screws through the side and floor of the body tub. Hardware included. Black powder coat.