To design this system Fabtech started with their 4" Performance System and then removed the transfer case spacers for use with a CV fixed yoke rear driveshaft. The result is higher ground clearance at the bottom of the transfer case skid plate. Also included in the system are rear axle eccentric cams to dial in the CV driveshaft angle as required, bump stop extensions, sway bar disconnects, drop pitman arm, front and rear trac bar drop brackets, four heavy wall tubular lower link arms with rotational urethane pivot joints on each end, 4" extended length coils, and four Performance Shocks. Available in Black.

The 4" Performance System features four heavy wall tubular lower link arms with rotational urethane "Johnnie" joints on each end that provide great articulation without the noisy highway ride. Also included are 4" extended length coils, billet transfer case spacers, bump stops, rear trac bar bracket, front sway bar disconnect links, rear sway bar links, and four Performance Shocks. Available in Black.

This kit offers the same great features as the original 4" Performance System but uses conventional urethane bushings in the lower link arm ends in place of the rotational urethane pivot joints. Also included in this system are bump stop extensions, extended sway bar links, drop pitman arm, rear trac bar drop bracket, 4" extended length coils, and four Performance Shocks. Available in Black.

Fabtech’s 2-1/2" Adjustable System for 1997-04 TJ Wranglers features an adjustable coil spring seat that works with the stock front and rear coils or aftermarket springs. The vehicle can be adjusted front to rear to compensate for heavy cargo or a winch. The system also includes extended length bump stops, a spanner wrench to allow adjustment with the vehicle on the ground, and four Performance Shocks.

With Jeep suspension lift kits for the everyday showman or the off-road enthusiast, Fabtechs award-winning design, rigorous testing procedures, and tireless attention to detail result in Jeep lift kits unparalleled in quality. Choose from the Fabtech Crawler, Radius Arm, Long Arm, or other, immaculately designed Jeep suspension lift kits. Whether you feel like scaling a mountain, or just want to stand out in the crowd, a Fabtech suspension is common sense..

The YJ Wrangler 3-1/2" Performance System includes heavy duty front and rear military wrap leaf springs that feature nylon glide pads between each leaf for a friction free ride. The front springs use 5 leaves while the rear packs use 4 leaves. This system comes complete with a transfer case lowering kit, drop pitman arm, extended sway bar links, trac bar relocation brackets, and four Performance Shocks

Enhance your Jeeps steering performance with the addition of a replacement Fabtech Steering Stabilizer.

This kit is built for the hardcore rock crawler that demands maximum ground clearance and articulation to handle Class 5 Trails with ease! This heavy duty system features a Radius Arm Front Suspension with 2" D.O.M., 5/16" thick links that pivot on proven Rotational Urethane Joints attaching to the stock axle brackets. The rear suspension is a 3-Link System with a massive tubular dimple die upper Wishbone that attaches to the frame end with Rotational Urethane Joints and to a one piece axle bracket with a 1" spherical bearing. Lower rear links are 2" D.O.M., 5/16" thick and also attach using Rotational Urethane Joints. Everything is connected by a 1/4" thick Transfer Case Skid Pan that is covered with a High Density Plastic Skid Cover. Kit includes Adjustable Front Trac Bar with a Double Shear Frame Brace, Sway Bar Disconnects, Drop Pitman Arm, Stainless Brake Hoses, Bump Stops, Coil Springs, and Performance Shocks. Black powder coat finish.

Designed specifically for use with the Fabtech TJ High Clearance Crawler System, this high quality stainless steel system replaces the stock assembly and allows proper clearance for the large upper rear wishbone. The performance muffler included in this system may increase the noise level of the exhaust slightly.