Designed for use with 6 or 8 cylinder engine with an automatic transmission, this direct bolt-in aluminum conversion radiator boasts a 20-40 degree temperature drop over conventional cooper/brass radiators. Its unique cross flow design consists of two 1-core rows which offer better flow and more cooling capacity than most heavy-duty 4-core radiators. This radiator is specifically designed for high horsepower motors, trailer towing, back-country rock crawling and for normal/medium powered stock vehicles working in extremely high temperature conditions. This radiator is also great if you're just looking for more efficient cooling. Be Cool radiators have a greater life cycle than the original equipment while weighing 40% less. All tanks and brackets are hand built with .080" wall thickness alloy and are fully pressure tested. All units come with cast-filler necks, petcocks and fittings. Be Cool radiators are compatible with all major brands of anti-freeze and are handcrafted in the US.

Designed for use with an automatic transmission, this direct bolt-in aluminum conversion radiator boasts a 20-40 degree temperature drop over conventional cooper/brass radiators. Its unique cross flow design consists of two 1-core rows which offer better flow and more cooling capacity than most heavy-duty 4-core radiators. This radiator is specifically designed for high horsepower motors, trailer towing, back-country rock crawling and for normal/medium powered stock vehicles working in extremely high temperature conditions. This radiator is also great if you're just looking for more efficient cooling. Be Cool radiators have a greater life cycle than the original equipment while weighing 40% less. All tanks and brackets are hand built with .080" wall thickness alloy and are fully pressure tested. All units come with cast-filler necks, petcocks and fittings. Be Cool radiators are compatible with all major brands of anti-freeze and are handcrafted in the USA.

All in one kit. Each Be Cool Module System includes a genuine Be Cool cross flow aluminum radiator, a high torque, European style electric fan in a euro black finish, aluminum fan mounting brackets, electric fan wiring harness, a diamond-cut, vented coolant recovery tank, a billet Be Cool radiator cap and all necessary hardware. *These radiators will not work with the stock fan shroud.

Manufactured of billet aluminum, these radiator caps complement any Be Cool Direct Fit Aluminum Conversion Radiators. Available in Round or Octagon styles.

Made of Diamond-Cut billet aluminum, this vented fluid recovery tank is a 7"L x 3" diameter cylinder with fittings and mounting bracket.

**Per BE-COOL, 95% of customers will need this fitting to complete the installation. There are two required for each install. On a rare occasion when customer chooses to use AN (Army Navy fittings) our fitting would not be required. Sold individually.

Increase horsepower by replacing your mechanical fan with Be Cool electric fans. Improving airflow is one key to maintaining your vehicle's operating temperature. This 16" high torque fan will provide substantial air flow increases compared to the stock mechanical fan at idle or low vehicle speed. When used in conjunction with a Be Cool radiator, vehicle will operate at or near the thermostat temperature. This fan produces 2360 CFM at only 12 volts drawing 16 amps and fan motor has a life cycle of 6000 hours. Fans include universal mounting brackets. Wiring sold separately.

For use with Be Cool fan and radiator, the ultimate in reliability and ease of installation. Kit includes 4 aluminum brackets and 4 rubber bumpers to achieve proper fan mounting.

Standard fan control kit automatically turns the fan on at 195 degrees and off at 180 degrees. The adjustable fan control kits allow for adjustable temperature settings and on-off fan operation. Includes aluminum control box, LED light, fan activation sending unit, and necessary wiring. Adjustable controls must be matched to temperature gauge type (mechanical or electrical).