Warrior Products
"Lifestyle Protection!" - For years Warrior has been striving to bring you the best quality and value in Jeep accessories. As you've seen lately we have expanded into bringing you the same quality in the same parts for your truck. Our Jeep line brings you top products from diamond plate body and interior accessories, to bumpers and roof racks, and even lift kits and suspension parts. To add to this we are now manufacturing nerf bars, traction control systems, and armor for your truck, 4x4, or Jeep. We strive to have a wide selection to appeal to all Off-Road enthusiasts.
About Warrior Products : Warrior, Inc. was established in 1992 and is the parent company of the Warrior Products brand of Aftermarket accessories, serving the Jeep, truck and SUV vehicle segments.
Proudly made and headquartered in Tualatin, OR, Warrior Products delivers high quality and innovative product solutions to the enthusiast marketplace.
-
Designed with legendary Warrior strength and durability using high quality steel, these bumpers can come with a one-piece welded grille guards formed from 1-1/4" round steel tube, welded D-ring tabs, and/or a winch mount.
All bumpers are finished in durable black powder coat.
-
Our heavy-duty Rock Crawler Bumpers are designed for the off-road enthusiast who wants rugged construction, and a rounded underside to provide greater entry and exit clearance. Several of the rear bumpers have a light-duty 2” receiver hitch built in.
-
Our bolt-on Standard Bumpers are designed to accent factory styling cues to add an OE look to the vehicle.
-
An ideal solution for lightweight towing needs, the rear bumper comes with or without a Class III receiver hitch with a 2” standard opening.
-
Our winch mounting plate will fit most Aftermarket and factory bumper systems, and features a lower mount point to clear the front grille as much as possible.
-
Frame reinforcement kits are a must for any Jeep Cherokee bumper with D-Rings or a Winch. These brackets tie more of the unibody to the bumper mounts so you can pull from your front bumper with piece of mind.
-
Crossbars make great light bars that can be easily removed from the vehicle by pulling snapper pins on each leg.
-
Easy to install, Rock Barz are constructed of heavy-duty 2"x4" rectangular steel, and designed to protect the entire length of the rocker panel. Polyurethane end caps keep the tube free of debris.
-
Rock Sliders provide a full 7” of under-body wrap to the rocker panel. This rugged construction is built from 3/16” steel plate.
-
Our signature Knight Guard™ Nerf Bars span the full length of the vehicle, for wheel-to-wheel protection of the rocker panel. Constructed of 3” round tube and black powder-coated, each bar acts as an entry step into the vehicle as well.
-
The Hi-Lift Jack Hood Hinge Bracket mounts to existing hood hinge holes, eliminating the need for drilling, and making installation a snap.
-
The Light Bar affixes to the Hood Hinge Bracket and allows up to three lights to be positioned in front of the Hi-Lift Jack.
-
Jack handle strap holds your Hi-Lift Jack handle in place and secure so you get no rattling or vibrations.
-
This bracket allows an auxiliary light to be mounted to the windshield hinge. Utilizes existing holes, so no drilling is required.
-
A perfect way to relocate your license plate while adding a custom look, this License Plate Bracket is constructed of 11-guage HRPO steel plate and comes complete with all of the mounting hardware for an easy installation. The lighted version comes with a triple LED marker light.
-
This bracket allows your factory mirrors to be relocated to the windshield hinge. Made of 11-gauge steel and black powder-coated, these brackets fit within the hinge’s existing holes.
-
This product combines two functions in one easy-to-install bracket. Not only can you relocate your mirrors to the windshield, but also add an auxiliary light there as well.
-
Use these plates to cover the opening in your doors when relocating your mirrors.
-
Designed to mount directly to the factory spare tire carrier, the spacer allows an extra 2” of clearance for mounting over size tires. This bracket has multiple location holes to allow it to be mounted in several different positions.
-
An ideal solution when adding a larger spare tire to your rig, these brackets allow the third brake light to be raised for improved visibility from the rear of the Jeep.
-
An ideal solution when adding a larger spare tire to your rig, Third Brake Light Spacers allow the third brake light to be raised for improved visibility from the rear of the Jeep. LED 3rd Brake Light for the TJ and JK are intended to be used when removing the factory spare tire mount and 3rd brake light.
-
All lights are American-made with a lifetime warranty, and are sold separately.
-
Designed to replace the original flares, Tube Flares mount into existing fender wells with minimal drilling. Constructed of 1.5" tubing, these beefy frames are a perfect compliment to our Tube Doors.
-
The Warrior Products Universal Brush Guard is designed to attach to any flat surface front bumper.
Manufactured using high quality steel, this one-piece welded guard is formed form 1 ½" round steel tubing, and provides protection when off-roading from shrubbery to the front grill and headlights.
-
Designed to attach to any flat surface front bumper. Manufactured using high quality steel, this one-piece welded guard is formed from 1-1/2" round steel tubing.
-
Designed to attach to any flat surface front bumper. Manufactured using high quality steel, this one-piece welded guard is formed from 1-1/2" round steel tubing.
-
Available in polished stainless steel and cast iron. 3/4" shackle size includes a 7/8" pin diameter and fits any Warrior Products D-Ring Bumper or D-Ring Brackets.
-
Constructed of 1 x 2" solid bar on a 3/8" mounting plate.
-
Replaces the 6 TORX bolts along the tub rail that hold the hardtop onto the Jeep. These quick release knobs allow you to easily prepare your hardtop for removal without tools.
-
Warrior Products high performance suspension systems are built to stringent standards for strength, performance and durability.
Kits include JK & YJ Wrangler and XJ Cherokee.
-
Lower Control Arms are built of high quality, powder coated steel.
Suitable for lifts up to 3".
-
Extended sway bar links allow use of factory sway bar on lifted Jeeps.
Suitable for lifts up to 3".
-
Allows use of factory track bars on lifted Jeeps to keep the axle centered under the vehicle.
Suitable for lifts up to 3".
-
This unique suspension system comes complete with lock nuts, polyurethane bushings, drilled sleeves (where needed), hardened bolts with greaseable fittings.
-
These MIG-welded, jig-built, Spring Shackles come complete with all the mounting hardware required for an easy installation. Shackle Kits lift one end of the vehicle 1/2"
-
These MIG-welded, jig-built, Spring Shackles come complete with all the mounting hardware required for an easy installation. Shackle Kits lift one end of the vehicle 1"
-
These MIG-welded, jig-built, Spring Shackles come complete with all the mounting hardware required for an easy installation. Shackle Kits lift one end of the vehicle 1-1/4"
-
These MIG-welded, jig-built, Spring Shackles come complete with all the mounting hardware required for an easy installation. Shackle Kits lift one end of the vehicle 1-1/2"
-
Finally, there’s a leaf spring Shackle Frame Bracket that can handle the abuse! Die-formed and jig-welded from ¼” steel, these brackets will not unwind thanks to reinforced gussets. Some bracket kits include urethane bushings and greasable bolts as well.
-
Finally, there’s a leaf spring Shackle Frame Bracket that can handle the abuse! Die-formed and jig-welded from ¼" steel, these brackets will not unwind thanks to reinforced gussets.
-
Have you ever experienced an unstable, wandering sensation prevalent in CJ-series Jeeps and YJ Wranglers? Our SR-180 Shackle Reverse System is designed to eliminate poor handling characteristics, and help create a safer vehicle for all driving conditions.
-
A Greaseable Bolt allows one to lubricate the urethane and/or rubber bushings to both extend its useful life, and to keep them from squeaking.
-
These weld-on leaf Spring Perches are a must for converting springs to an over axle tube application, or for replacing perches that have collapsed. They work well for installing wide springs, or relocating them altogether on your rig.
-
Our Universal U-bolt Plates are constructed of steel and available in standard (1/4”) and heavy-duty (3/8”) 4-wheel drive applications.
-
To replace worn or broken pins, these solid replacement shock absorber cross pins are machined from steel round stock and offer much greater strength than standard round tubing pins.
-
These versatile brackets allow maximum flexibility when rebuilding your suspension system.
-
Great for repairing a broken shock mount or making custom sway bar end links.
-
Since the factory stem-style shock mounts are notorious for breaking, this steel-formed part allows the conversion of the post mount to an eye mount, for greater durability and functionality.
-
Sway Bar Disconnects are constructed with a double snapper clip for removing the entire bar quickly, for added wheel articulation. With four lengths to choose from, there’s sure to be a model to fit your application / needs.
-
Backplates cover the body beneath the tailgate, between the rear corners. Backplates are cut out to fit around hinges for ease of tailgate operation.
-
These covers protect against and cover ugly rock chips that speckle front fenders, as well as progice protection from tree and shrub limbs when off-roading. Sold in pairs, these covers have cutout for factory signal lights (where applicable).
-
Like the Front Fender Rock Protectors, these covers sit atop the fenders and match the rest of your body armor accessories. Sold in pairs with holes to accommodate OEM hood latches.
-
Front Frame Covers protect the frame between the grille and front bumper, and compliment the rest of the vehicle’s trim accessories.
-
Our new Rear Corners have openings to accommodate two flush-mounted LEDs: a 4” red stop, turn and taillight, plus a 2” white reverse light.
Lights are not included.
-
Rear corners have a material thickness of 1/8" and not only provide structural support to the corner area, but enhance the appearance of the vehicle too. To allow easier installation, corners have precut holes for the gas tank and tail light openings, unless otherwise specified.
-
When a full Rear Corner is not desired, Short Corners have the same width / height of the Side and Backplates, to round out a complimentary trim package.
-
Replacement Hood Vents match other body armor accessories and add decorative styling to your Jeep hood. Available in the full compliment of finishes.
-
For the JK Wrangler, a new Cowling design is offered, adding decorative trim across the width of the hood up to the windshield’s glass.
-
Sideplates protect the rocker panel area below the door and enhance the appearance of the vehicle too. Available flat or with a 90-degree bend (lip) that wraps under the rocker panel 1".
-
Tailgate Covers conceal the entire surface area of the tailgate, and have cutouts around the door handle for ease of tailgate opening and operation.
-
Our Adventure Rack adds additional storage to vehicles with limited storage capacity. Positioned above the vehicle’s spare tire, this rack has a weight capacity of 200 lbs. Ideal for camping equipment, coolers or anything else you need along the trail.
-
The ultimate in sport racks, the Safari Sport Rack is a semi-permanent, modular system. As its base, two independent crossbars mount at the vehicle's windshield and rear tub areas as supports for lights, small watercraft, and/or a cargo basket.
-
Whether replacing a damaged panel or just improving the look of your Jeep, Warrior Products builds inner door panels for lower half and full doors.
-
Whether replacing a damaged panel or just improving the look of your Jeep, Warrior Products builds inner door panels for lower half and full doors.
-
To compliment the balance of the Warrior Products body armor accessories, our Half Doors are a complete replacement door assembly (not built to be an OEM replacement). Sold in pairs, each door comes with the proper paddle handle and mounting hardware for complete closure.
-
Designed to replace the vehicle’s full or half doors, Tube Doors provide additional protection to front seat occupants while off roading. Tube Doors mount into existing door hinges and come in two versions: our deluxe paddle handle or standard latch closure systems.
-
These mounting brackets are receptacles that allow the frame pins from upper soft doors to fit atop the Warrior Products Half Doors. The kit includes six mounting receptacles for a pair of upper doors, three per side.
-
Our Off-Road Exhaust kit relocates the muffler to the straight section of the exhaust mid-pipe, and comes with a high-clearance tailpipe.
-
The tailpipe kit includes the high-clearance tailpipe and exhaust clamp.
-
Built to exceed factory specifications by using 12-gauge HRPO steel, this 20-gallon, Fuel Tank Skid Plate is jig-welded and black powder-coated for lasting durability.
-
A must have for protecting your differential, this guard fits over the factory differential plate to provide maximum protection from rocks, stumps, or anything else encountered on the trail. Powder-coated in a protective hammertone gray finish, there are models to fit a variety of axles.
-
The Steering Box Brace provides extra rigidity by anchoring the bottom of the steering box to the opposing frame rail.
-
Let Warrior Products provide everything you need to flat tow your rig to the trails.
High quality components will give you peace of mind while you get your Jeep out to the fun!
-
Our Shifter Covers are a direct factory replacement to original mounting holes with no drilling required.
-
These great looking Dash Boards, Panels, and Overlays come in several versions to customize the vehicle’s dash. Constructed from sturdy aluminum and available in several finishes.
-
Dash Panel Overlays customize the look of the vehicles interior. Precision-stamped for a perfect dash compliment, out overlays fit the center dash panel area of the Wrangler.
-
Use these kits to limit the opening travel of your tube doors, or use on any other type of door as a universal kit.
-
Replaces the factory storage compartment in the rear tub of the JK Wrangler with a larger, stronger, more secure trunk.
