Olympic 4x4
Makers of front and rear bumpers, side protection, tire
carriers, rack systems and accessories for Jeep CJ, Wrangler and Cherokee
vehicles.
-
Built rock solid for the roughest toughest off road environments. Gull wing
style allows improved tire clearance. Protects the full front end from fender to
fender. Sits on top of the frame horns increasing the ground clearance under the
bumper. Will accept any winch with a standard 4.5" x 10" mounting bolt pattern.
The integrated 2" receiver is ideal for any off-road accessory. Easily bolt on
installation to factory bumper bolt location.
-
Engineered for maximum front end coverage, the Defender tube provides the
ultimate in extreme front end, grill, headlights and winch protection.
Manufactured from 2" round construction quality heavy wall steel tube, providing
a 1/4" of steel between your Jeep and any obstacle you come up against.
-
Engineered to easily bolt on. Boa style tube bending provides extreme front end
and grill protection, leaving room for a winch to be installed. Manufactured
from 2" round construction quality heavy wall steel tube, providing a 1/4" of
steel between your Jeep and any obstacle you come up against. Olympic will be
introducing a winch mount for this bumper you can add at a later date.
-
Rock and roll with confidence. Olympic built, rock tough bumpers are
manufactured from 3/16" seven gauge heavy steel plate. Bolts onto existing
bumper mounting locations, with no drilling required. Ends are welded closed for
extra strength. For grill protection we recommend you purchase a 610-Front End
Guard. Available in Textured Semi Gloss Rubicon Black(4) or High Gloss Black(1)
Powder coated finishes.
-
For extreme approach and departure angle without tire interference. No drilling
required, easily bolts onto all 1987-05 Wranglers. This bumper protects your
fenders, headlights, front grill and winch. Manufactured from heavy-duty
construction quality steel tubing. 1.5 inch x .120 wall providing a 1/4" of
steel between your Jeep and any obstacle you encounter.
-
The Basher Bumper is tough. With 3/8" thick solid steel mounting plates and
2-1/2"-3" round cross tubes, this bumper offers great strength. Bolts to the
existing front bumper hole locations with stock bumper or 54" bumper with holes.
This basher bumper may require the removal of the rubber bumpers on the stock
Jeep bumper to let the brackets and bolts work properly for mounting the guard
correctly.
-
Designed to protect the front grill and hood from damage in case of a roll over.
Engineered to easily bolt on to any Olympic Rock Bumpers, the Original Jeep
Bumper and other manufactures bumpers with a 4.25" deep front face. Bolts in to
four existing mounting holes on your 1987-06 Wranglers. Manufactured from
construction quality 2" round .120 heavy wall steel tubing.
-
Olympic's Front End Guard bolts to the stock bumper hole locations and is
compatible with either the stock bumper or the 54" bumper with holes. Side
plates are 3/8" solid steel with 2-1/2" cross bars. Sold separately is a brush
guard to protect your headlights which bolts directly to the existing holes in
the front end guard.
-
Olympic's Front End Guard bolts to the stock bumper hole locations and is
compatible with either the stock bumper or the 54" bumper with holes. Side
plates are 3/8" solid steel with 2-1/2" cross bars. Sold separately is a brush
guard to protect your headlights which bolts directly to the existing holes in
the front end guard.
-
Check out these Double Nerf Bars, they can be installed pointing up or down
& reverse them if you change your mind simply by removing two bolts from
each frame support and switching the drivers side bar with the passenger side
bar in less than ten minutes. Manufactured from extreme duty, high strength 1.5"
steel tubing providing a 1/4" of steel between your jeep and that rock. Protects
both the undercarriage and side rocker panels. Mounted in the up position gives
you high clearance, and the down position makes them more useful as steps. They
provide the perfect location for a Hi Lift Jack to be used when changing a tire.
-
Check out these convenient nerfbars, they can be installed in the up or down
position and you can change the position easily even after there installed. For
serious rock crawling, install the tube pointing up so it provides extra
protection for your rocker panels. For mild off-roading or to be used as a step,
install the Reversa-a-Bars with the tube pointing down. The No-Drill
installation sandwiches the frame between the mounting plates of the
Reversa-a-Bar. Available in Rubicon Textured Black.
-
These big boys are manufactured from 2"x3" heavy wall, 7-gauge steel rectangular
tubing. Nerf bars have a solid flat surface for easy entry and exit from your
vehicle. Both ends of the tube are cut at 60 degree angles for better approach
and departure angles. Easy installation with no drilling required.
-
The toughest rocker guards combined with the additional protection of 1.5 inch x
.120 wall round construction quality steel tubing that creates a combination of a half inch of steel between any obstacle and your Jeeps side panels. No drilling required, easily bolts onto your 1997-06 TJ Wrangler. The rails are
welded on at a 45 deg. angle to provide the perfect angle when your vehicle is leaning to one side and you need to protect the entire side and top of the jeep.
Provides the perfect location when using a Hi-Lift Jack. Available in Textured Semi Gloss Rubicon Black(4) or High Gloss Black(1) Powder coated finishes.
-
A full 1/4" of solid steel protects both the side and undercarriage of your Jeeps valuable side panels. No drilling required, easily bolts onto your 1997-05 TJ Wrangler. Heavy-duty 1/2" acorn nuts provide smooth round surface to glide over the roughest terrain. Provides the perfect location when using a Hi-Lift Jack. Available in Textured Semi Gloss Rubicon Black(4) or High Gloss Black(1) Powder coated finishes.
-
Protect the side and lower panels of the jeeps center section. Engineered to
easily bolt on, optional drilling for hardcore four wheelers. Manufactured from
1/4" steel plate.
-
Covers the side and lower panels of the Jeeps center section. Engineered to
easily bolt on, minimal drilling optional. Manufactured from .125 wall (1/8")
steel plate.
-
Single tube side bar protects rocker panel guards, easily bolts on. Manufactured
from 2" round construction quality heavy wall steel tube, providing a 1/4" of
steel between your Jeep and any obstacle you come up against.
-
Easily convert from a serious rocker panel nerf bar to a running board in
minutes, for easy access and exit from front and back seats. Manufactured from
construction quality 2" x 4" .120 wall rectangle steel tubing. Provides a 1/4"
of steel to protect your Jeep. Both front and rear tube ends are cut at a
extreme 60 degree angles for best possible approach and descending angles.
Available in Textured Semi Gloss Rubicon Black(4) or High Gloss Black(1) Powder
coated finishes.
-
Bolts on to vehicle frame in four locations per side with no drilling. Olympics
exclusive and unique feature; rectangle side bar slides in and out so you can
use it as a running board or side step when running around the city. The 2" x 3"
extreme heavy wall steel tubing providing a 1/4" of steel protection between
your Jeep and any obstacle you come across.
-
Features Olympic’s exclusive and unique gull wing design. Easily bolts on.
Energy absorbing engineering keeps impact from potentially damaging your
vehicles frame. Manufactured from seven gauge solid steel 3/16" thick steel
plate with reinforcement bars around the 2" Receiver hitch. Rock Bumper has 250
pound tongue weight with a 2,500 towing capacity. This bumper is built to do the
job, add custom looks and durability to your Jeep.
-
Protects both rear end and rear quarter panels with the protection of 1.5 inch x
.120 wall round heavy-duty construction quality steel tubing. No drilling
required, easily bolts onto your 1997-06 TJ Wrangler. Includes a class II
receiver hitch with 250 lb. tongue weight. Keep in mind your Jeep is only built
to tow 1,500 lbs. This receiver hitch is engineered so you can easily slide in
receiver accessories without modification of accessories. Available in Textured
Semi Gloss Rubicon Black(4) or High Gloss Black(1) Powder coated finishes.
-
Engineered to easily bolt on. Bolts on without interfering with O.E.M. style
2" Receiver Hitch. Designed to protect your Jeep from extreme descending degree
angles. Manufactured from 2" round construction quality heavy wall steel tube,
providing a 1/4" of steel between your Jeep and any obstacle you come up
against. Boa style design protects the rear corner rocker panels from on and off
road hazards.
-
Engineered to easily bolt on. Bolts on without interfering with O.E.M. style 2" Receiver Hitch. Defender style design protects the rear corner rocker as it completely wraps around the rear corner panels. Manufactured from 2" round construction quality heavy wall steel tube, providing a 1/4" of steel between your Jeep and any obstacle you come up against.
-
Tire Swing easily bolts onto 1997-06 TJ Wrangler with the 153 A/T Slider Rear
Bumper. Will carry up to a 37" spare tire. Requires removing the factory tire
carrier from Wrangler tailgate and bolting it onto the Tire Swing. Manufactured
from heavy wall 2.5" steel tubing construction. Available in Textured Semi Gloss
Rubicon Black(4) or High Gloss Black(1) Powder coated finishes.
-
Tire Carrier is designed to replace that factory light duty tire carrier on your
Wrangler. Fits all Olympic Tire Swings. You can easily remove the OEM tire mount
and bolt it to the 700 tire swing or mount it directly to the Olympic Heavy Duty
707 Tire Mount. Made of 1/4" thick solid steel plate it will provide the extra
strength to handle up to a 37" spare tire. Tire Carrier is pre-drilled for
4-1/2" or 5-1/2" wheel centers and comes with the Lug bolts to install the spare
tire. Available only in Textured Rubicon Black Powdercoat.
-
Olympic’s Tire Mounts were built after experiencing the O.E.M. tire mount coming apart when larger diameter spare tires were installed.
-
This versatile mounting placement bar can be used to mount Auxiliary lights,
Hi-Lift jacks and numerous other types of off-road gear. Use as a bumper under
rider by mounting under the bumper providing protection of steering box. Made of
1.5" x .065" wall round steel tubing, easily mounts to pre existing mounting
holes on 1997-06 TJ Wrangler. Available in Textured Semi Gloss Rubicon Black(4)
or High Gloss Black(1) Powder coated finishes.
-
This maxi light bar is the best light bar available and its easy to mount-no
drilling required. Olympic's light bar bolts to your windshield hinge with
longer bolts (included) for proper installation. Light bar can be removed
quickly when not in use by simply taking out 4 bolts (2 per side). Maxi light
bar hold up to 5 lights, sold separately.
-
Dave’s Rack offers numerous advantages to the Jeep owner. Superior to any rack
on the market today. You can easily lift the rack up to fold down the
convertible style soft top. The top of the Dave’s Rack lifts up and over 180
degrees to create the perfect sunshade for picnics and camping. Dave’s Rack
comes with Sport Rails, which can be easily removed to convert the rack to a
sunshade. No drilling required. Bolts into front windshield hinges and into
existing mounting holes behind the rear tail lights. For extra strength and
security, Dave’s Rack bolts directly to the vehicles frame at both the body
mount points and directly to the frame.
-
Now you can enjoy all of the Sports and recreational activities that your Jeep
can get you to! Imagine the possibilities with the Sports Rack. The Multi-Use
configuration has mounts for up to 5 Off-Road lights (not included) above the
windshield. 150 lb. capacity as is or you can purchase the Sports Rack Loader
and Sports Rack rails to up grade it to 250 lb. capacity. The Sports Rack can be
mounted on Hardtop or Soft Top equipped vehicles. Some Drilling is required for
installation.
-
Made to bolt on to Jeep bolt pattern (5 on 4.5"). Holds up to 50lbs. on the
stock tailgate mounted tire carrier and up to 250lbs. on Olympic Tire Swing.
Sierra Rack Dimensions: 43.5" x 17" x 4.75". Available in Textured Semi Gloss
Rubicon Black(4) or High Gloss Black(1) Powder coated finishes.
-
Looking for a way to carry stuff on the top of your Jeep®, but you don’t want
a full roof Rack? Well this utility Quick Rack installs in minutes to the
factory sports bar with no drilling required. Is great for hauling lumbar from
the home improvement store or for carrying Rafts or Kayaks etc. to the beach.
-
The Mountaineer Rack doubles your rear storage capacity above your rear seat.
Wrangler TJ comes with special hardware that bolts inside the rear roll bar.
This hardware can also be used as an Arm Rest when the Mountaineer Rack is
removed. Wrangler YJ owners with a 92 or newer YJ have a choice of ordering
either the YJ Roll Bar Mounted Rack or the CJ Wheel Well Mounted Rack which
requires drilling into the wheel wells and has the extra feature of being able
to pivot and be lifted from the rear of the Jeep.
-
One size fits all Wrangler’s. The Top Hat Rack goes over the cockpit and quickly
attaches to the factory roll bar on TJ Wranglers. It also can be installed above
the rear passengers on 1992-05 Wranglers.
-
Safari doors offer unique styling for those who want to remove the steel or soft
doors. Very little assembly is required to install. The doors are compatible
with 1981 and never rotary door latches. Adventure netting and arm pads to be
used with the doors are also available. Safari doors do not offer protection in
the event of an accident, therefore, seat belts should be worn at all times.
Includes one pair (driver and passenger side).
-
Safari Mirrors bolt easily into the windshield hinge of any CJ & Wrangler
when the doors are removed. Mirrors can be installed directly to the Jeep or to
Olympic Safari Doors. Sold in Pairs. Available in Black or Stainless Steel.
-
Olympics Jacklite brackets bolt easily to any custom JK Wrangler front bumpers that utilize the existing mounting holes on front of the vehicles frame.
