• Toll Free: 800-555-3353

Jeep Parts Home » Jeep Winches & Jeep Winch Accessories » Jeep 4X4 Jack Mount Kits » Off Road Jack Mounting Bracket

Off Road Jack Mounting Bracket

Rugged Ridge | Part Number: RUG11586.01
  • Technical Details

    • Fits 2007 to 2015 JK Wrangler, Rubicon and Unlimited
    • 2 and 4-door models
    • Textured black
    • Compatible with stock and most aftermarket rear bumpers
    • Fast and easy bolt on installation
    • Fits most off-road style jacks including Hi-Lift

JK Off-Road Jack Mount allows you to carry your Off-Road jack on the outside of your vehicle saving precious cargo space. Fast and easy bolt on installation. Compatible with stock and most aftermarket rear bumpers (without tire carriers) as well as Rugged Ridge XHD rear bumper with or without tire carrier. Bracket is sturdy and secures the jack in two locations to eliminate any vibration noise during vehicle operation. Durable textured finish looks great. Fits most off-road style jacks including Hi-Lift™.

Installation instructions are in PDF format. You will need Adobe Reader to view these files.
Download Instructions

Jack Mounting Type
Bumper Jack Mount

Other Products You May Be Interested In

Customer Reviews

Average Customer Review

REVIEW SNAPSHOT®

by PowerReviews
Rugged RidgeOff Road Jack Mounting Bracket
 
3.8

(based on 4 reviews)

100%

of respondents would recommend this to a friend.

Pros

  • Can withstand use (3)

Cons

    Best Uses

      Reviewed by 4 customers

      Sort by

      Displaying reviews 1-4

      Back to top

       
      4.0

      Rugged Ridge Off Road Jack Mount

      By Txjkjpr

      from Parker, CO

      About Me Off Road Enthusiast

      Verified Buyer

      Pros

      • Can Withstand Use
      • Easy to install
      • Good value
      • Secure

      Cons

      • Can Hit Glass
      • Needs Better Attachement
      • Rattles Loose

      Best Uses

      • Jeep

      Comments about Rugged Ridge Off Road Jack Mounting Bracket:

      The mount is very easy to install and provides good security. Works well. The only major draw back it that the bottom mount screw tends to loosen up and the jack rattles quite a bit. Would add a lock nut and a nub on the bracket to keep the jack from moving foward and rattling out of the back clip. That would stop the noise. The other issue is that it should be moved about a 1/2" over to the right. If the rear glass is up and the gate is closed the jack hits the glass. Could cause an issue.

      (1 of 1 customers found this review helpful)

       
      3.0

      Well made, but.....

      By Capt911

      from Palm Bay, Fla

      About Me Competitive Driver

      Verified Reviewer

      Pros

      • Thick
      • Well Made

      Cons

      • Not All Jacks Fit

      Best Uses

      • Truck

      Comments about Rugged Ridge Off Road Jack Mounting Bracket:

      First the template is off by a 1/2" from passenger side. Drill a small pilot hole will let you know where the bolt holes are. You will need 13 fingers to install all the parts, or use super glue to hold it together. Lastly does not fit wide base jacks, such as Smittybuilt jacks, the slot is only 4.5" wide.

      (1 of 1 customers found this review helpful)

       
      4.0

      Not so Fast Installation but worth it

      By Bartman

      from Sedona, AZ

      About Me Well Equiped

      Verified Buyer

      Pros

      • Can Withstand Use
      • Looks great
      • Nice Strudy Mount

      Cons

      • Not So Easy To Install

      Best Uses

      • Hi Lift Jack Mount

      Comments about Rugged Ridge Off Road Jack Mounting Bracket:

      Its easy to install if you don't use your plastic hinge covers. Make sure you check the template first, holes don't match the bolt pattern. Use 3/4" to 1" drill for clearance. Once you get past that, its a breeze to install. Good solid mount that looks good.

      (1 of 1 customers found this review helpful)

       
      4.0

      Hi Lift jack Mount

      By Don

      from Surprise, AZ

      About Me Casual Driver

      Verified Reviewer

      Pros

      • Can Withstand Use
      • Easy To Get To Jack
      • Improves Comfort
      • Lockable
      • No Rattles
      • Out Of The Way
      • Versatile

      Cons

      • Instructions Are Vague

      Best Uses

      • 4x4 Off Road Recovery

      Comments about Rugged Ridge Off Road Jack Mounting Bracket:

      This is a tough well thought out product with a few minor exceptions. The drilling of the hinge plates is not explained but without drilling, the hinge plates cannot be re-installed. The actual metal does not fit within the hinge bracket as shown but necessitates the use of the spacers. The spacers, washers, plastic hinge plates, and mounting bracket must all go on at once, so if you have three hands, or a helper that listens, this can be accomplished quite easily. Once the bottom bracket is installed, leaving the bracket loose, you must loosen the top hinge bracket and thereby loosing alignment of the gate. At this point you are in trouble, so leave the gate closed! Align and tighten the top bolts while lifting up on the mount. This will ensure your gate alignment will be pretty darn close. Tighten the remaining bolts and install your jack and lock and your done. Nice and tidy.

      Displaying reviews 1-4

      Back to top

       

      Questions & Answers

      Do you have questions about this product?

      get answers from real customers and in-house experts with AnswerBox.

      2 Questions | 2 Answers
      Displaying questions 1-2
      • Q:

        How does the mount install on to the XHD tire carrier?
        Asked on 8/5/2013 by JB from FL from Wesley chapel, fl

        1 answer

        • Staff Reviewer

          A:

          JB, I have attached a link to the install instructions for this Rugged Ridge Off Road Jack Mounting Bracket. It doesn't install on to the tire carrier, it installs onto the body.You can see exactly how here.
          http://jo.my/installjack

          Answered on 8/6/2013 by Jason L from Ohio
      • Q:

        Will the 54" Smittybilt fit in this mount?
        Asked on 5/16/2012 by Raf

        1 answer

        • CUSTOMER CARE

          A:

          Hello Raf! Yes, the Smittybilt 54" Jack will fit in the Jack mount bracket has same size base on it.
          Thank you!

          Answered on 5/17/2012 by Bob H from 4WD
      Displaying questions 1-2

      Do you have a question about this product?