Santa Ships EVERYTHING for FREE – No Exceptions – Ends Monday
*When You Buy Online and Pick Up In Store
1. Click on "Estimate Shipping" and Enter Your Zip Code
2. Select "Pick Up in Store"
*On All Parts When You Buy Online and Pick Up In Store
Installation coupon will be emailed after order has been confirmed.
Jeep Parts Home
Jeep Tops & Jeep Top Accessories
Jeep Hardtop Hoists
Power Hoist-A-Top Hardtop Removal System
If a vehicle is grayed out, no parts are available in this category. Wrong vehicle?
Year, make, model lookup will refine product results.
At 4Wheel Drive Hardware, we know the value of your hard-earned dollar. That is why we offer you our exclusive 4Wheel Drive Hardware price guarantee. If you have seen a lower price for the same product in a competitor’s current catalog, advertisement, or e-commerce site, we will gladly match* that price. This allows you to shop at 4Wheel Drive Hardware with the confidence that you are always getting the lowest possible price.
For refunds on orders placed within the past 90 days, please contact us at 877-474-4821.
Learn More or Request a Price Match
No place in your garage to store your full steel doors? Then you need a set of wall mounted door hangers to keep your doors up off the floor and safe from damage. The wall mounted door hangers mount to any wall with studs. Hang doors so inside panel faces each other and roll down the windows. Mirrors can be left fully open or bent into their retracted position.
View this part in our latest online catalog.
Request a Catalog mailed to you.
By Lange Originals
Part Number: LAN014-601
Removal and storage can now be a one-person proposition. Rigid construction with a powerful safety feature lifting device, your top will be supported on a well-balanced steel frame. Rubber coated hooks protect the finish. The Hoist-A-Top includes a hoist/puller, mounting brackets and hardware. The Power Hoist-A-Top does all of the work for you! The hardtop remover, winch, mounting bracket and remote control install conveniently in your garage.Hoist-a-Top is a complete turnkey system. Installation is simple and our custom systems come complete with excellent installation instructions. No more pulled muscles, strained backs, dropped or damaged tops, or pinched fingers. Best of all, you don't have to find a group of people to help every time.Hoist-a-Top uses an incredibly strong steel frame that quickly attaches to your top. There is nothing to drill or attach to your top. A specially designed cable pulling mechanism then lifts your top to the ceiling in your garage or carport for convenient, out-of-the-way storage. It takes only about three minutes to remove your top, by yourself. Replacing it is just as easy. With a working range of from 7 to 10 feet, Hoist-a-Top handles top removal and storage in most garages.
(based on 6 reviews)
of respondents would recommend this to a friend.
Reviewed by 6 customers
Displaying reviews 1-6
Back to top
Easy to use
About Me Casual Driver
Comments about Lange Originals Power Hoist-A-Top Hardtop Removal System for Freedom Hardtops:
This is a great unit for taking the top off in10 minutes easily all by yourself. Very well built. The only thing that needs improving are the bad instructions. You are almost better off not using them (almost). Go watch the video on their site for installation instructions. Took me roughly an hour to install.
Bottom Line Yes, I would recommend this to a friend
Images shared by Chitownrunner262
Was this review helpful? Yes / No
- You may also flag this review
Not a bad system
By MW3 for Me
from Houston, TX
About Me Auto Enthusiast
I recently purchased the motorized Hoist a Top by Lange for my 2012 Unlimited MW3 Jeep. Once I got it installed it worked great. My only real complaint is the instruction guide given in the package. The black and white copies were very difficult to read and poorly written. Lange does offer a web-based instruction guide but better paper copy would have been beneficial. Overall, I am please with the purchase as it does make lifting/lowering the top easier.
Not so bad!
from Charlotte, NC
Being mechanically inclined, but no mechanic, this took me about 5 hours to get installed by myself. Much of the time was spent trying to figure out the proper measurements for assembling the contraption that holds the roof. The instructions could be a bit more clear in terms of the literal clarity of the pictures as well as the dimensional layout and references in the install leaflet. My one real complaint is they did NOT pre drill holes in the T bar and arms - it uses screws that simply exert pressure on the arms as opposed to actually connecting to the tbar to secure those arms. I had one pop off on me while getting the J Hooks under the roof while confiugring it for my first lift. It would have been a nightmare when the top dropped while hoisting or lowering as it would drop the roof if those screw connections fail. I tightened them up again and feel pretty confident that they will hold at this point. Another big time sink was getting the measurements right to get the hoist mounted properly, though this is going to apply to anyone installing this and is based on yoru garage - not a design flaw. Definitely a measure twice, drill once operation. I have 24" centers on my rafters and they run parallel to the door opening - I used a couple of joist holders and cut some 2x6's to run perpendicular to the door on top of the rafters at 18" OC for use as a mount for the winch given the provided 18" mounting bar (this had the added benefit of giving me a couple extra inches of rise for the jeep top in its raised position relative to the floor). It would have been nice if a 24" bar was provided as well (or at least be able to specify the your particular joist/rafter offset at ordering time).All in all it works great and quite pleased, though it loses a star for the T bar implementation. I just dont like using 4 tiny screws and the down pressure on the support arms to secure them. Still a recommended buy for its functionality.
Images shared by Josh
This thing is awesome and does make removing and installing top easy. However when I opened it the bolts that hold the brackets to the back of the winch were MIA. I looked every where for them. I ended up popping out the pressed in nuts and putting my own in. Other than that it's great.
(1 of 1 customers found this review helpful)
Easy to install and use by myself
By beep beep I love my jeep
Agreed that the directions were more confusing than necessary but we had it up in about 30 minutes without any issues. In our 2-car, 10' garage, the hoist sits next to the door opener and the hardtop rests above the garage door when open. The lift has a safety stop near the top so when the hardtop is being raised to the ceiling it doesn't hit the hoist. The only thing I would change is the speed when lowering the top- there is only one speed and I have a hard time not lowering the top too quickly back to the jeep.Attached is a shot of my husband and his beloved car under the hoist. It leaves plenty of room for him to walk under and he's 6'. I love that it's off the floor, out of the way, and protected until winter.
Images shared by beep beep I love my jeep
Tags: Picture of Product, Using Product
(0 of 1 customers found this review helpful)
Ceiling Mount is Easy to Install
from Richmond, VA
At first I was intimidated because the directions weren't so clear. However, the ceiling mount was very easy. Drill two holes into ceiling, attach motor unit. Next, put together contraption to hold roof. Finally, attach contraption, balance it with a milk gallon filled with water, and raise it to the ceiling. It's ready for top removal this spring.
Do you have questions about this product?
get answers from real customers and in-house experts with AnswerBox.
Know the answer? Answer this question
Do you have a question about this product?
The Perfect Gift.Any amount.Any occasion.Buy Now
Free Full-Color 4WD Catalogs.Get Yours Today
59 Stores Nationwide.Locate a store near you.