• Toll Free: (800) 555-3353
Order by 2 p.m. ET on Dec. 22 for 2-Day Air Christmas Delivery

Jeep Parts Home » Jeep Hitches & Hitch Parts » Jeep Receiver Hitches » 2" Receiver Hitch

2" Receiver Hitch

Rugged Ridge | Part Number: RUG11580.10
Help us ensure this part fits your vehicle Check Fitment
  • Technical Details

    • Fits 2007 to 2015 JK Wrangler, Rubicon and Unlimited
    • 2 and 4-door models
    • Black only
    • 3500 lb. gross trailer weight
    • 350 lb. tongue weight rating

Custom design bolts directly to factory mounting points on the rear of the vehicle, very similar design to the OE Receiver Hitch. Durable powdercoat design sheds water and provides a long lasting rust free finish. Includes cutout for factory wiring harness mounting. Designed as a one-piece welded assembly for added strength, we built our hitch receiver to match the towing capacity of your Jeep: 3,500-lb tow rating, 350-lb tongue weight rating with weight distributing equipment; otherwise 2000-lb tow rating, 200-lb tongue weight rating, 2 opening."

Installation instructions are in PDF format. You will need Adobe Reader to view these files.
Download Instructions

Front Or Rear Receiver SizeWeight ClassFits With Roll Pan
Rear2in. X 2in.Class IINo

Other Products You May Be Interested In

Customer Reviews

Average Customer Review

REVIEW SNAPSHOT®

by PowerReviews
Rugged Ridge2" Receiver Hitch
 
4.5

(based on 2 reviews)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

 
4.0

Great hitch, challenging install

By Jeff

from Memphis, TN

About Me Casual Driver

Verified Reviewer

Pros

    Cons

      Best Uses

        Comments about Rugged Ridge 2" Receiver Hitch:

        Difficult to get the nuts on the bolts on the 2015 Rubicon due to limited space between the receiver and the bumper. Would recommend duct taping the nuts to the receiver prior to the install, lining up the nuts to the holes. Holding them with a set of needle nose pliers works, but is difficult.

        (1 of 1 customers found this review helpful)

         
        5.0

        Very easy install

        By Buzz

        from Columbia, SC

        Verified Reviewer

        Pros

        • Was Very Easy To Install

        Cons

        • Picture Is Not Accurate

        Best Uses

          Comments about Rugged Ridge 2" Receiver Hitch:

          Was very easy to install, didn't even need the directions, it was obvious how to install it. The picture showed nuts welded to the hitch. They were not, but was still a simple install.

          Wiring harness was easy too. (I did look at the directions for a quick minute)

          Displaying reviews 1-2

          Back to top

           

          Questions & Answers

          Do you have questions about this product?

          get answers from real customers and in-house experts with AnswerBox.

          2 Questions | 2 Answers
          Displaying questions 1-2
          • Q:

            Are you able to reinstall towing hook after installing the hitch? Is there enough room?
            Asked on 8/10/2013 by Old cop from Newnan, ga

            1 answer

            • Staff Reviewer

              A:

              Yes, you can re-install your tow hook once installation is complete. Thanks!

              Answered on 8/12/2013 by Craig R. from Ohio
          • Q:

            what is the maximum weight I can put on this hitch using for example, a bike rack or cargo rack, or both.

            thanks
            Asked on 7/19/2012 by mk from nj

            1 answer

            • Staff Reviewer

              A:

              Hello MK!
              Directly on the tongue, which is how your racks will mount, would be 350lbs. This may or may not exceed the capacity of the rack you are using, so make sure to check with the mfg of the device before overloading it.

              Answered on 7/23/2012 by Aaron S. from Ohio
          Displaying questions 1-2

          Do you have a question about this product?