• Toll Free: 800-555-3353

Jeep Parts Home » Jeep Bumpers & Jeep Tire Carriers » Jeep Front Bumpers » XRC Atlas Front Bumper

XRC Atlas Front Bumper

Smittybilt | Part Number: S/B76892
Help us ensure this part fits your vehicle Check Fitment
  • Technical Details

    • Fits 2007 to 2015 JK Wrangler, Rubicon and Unlimited
    • 2 and 4-door models
    • Innovative 3 Piece design
    • Lower design winch plate allowing greater air flow
    • Two stage textured matte black finish
    • Manufactured from 3/16 cold rolled steel
    • Bumper bolts directly to your vehicle
    • 5 year limited warranty

The brand new Smittybilt XRC Atlas front bumpers are the latest and greatest products to come out of the Smittybilt R&D Department. These bumpers have gone through extensive design and testing to meet stringent international pedestrian safety standards. As a result, these bumpers are stylishly chiseled as well as being extremely strong and functional. These bumpers allow impressive ground clearance and can accommodate up to 37" tires.

StingerTypeWinch Mount IncludedWidthGrille Guard IncludedLight Mounts IncludedFinishMaterialD-Ring Mount Included
NoHeavy DutyYesFullYesYesPowder CoatStainless SteelYes

Other Products You May Be Interested In

Customer Reviews

Average Customer Review

REVIEW SNAPSHOT®

by PowerReviews
SmittybiltXRC Atlas Front Bumper with Grill Guard and Fog Light Holes
 
4.0

(based on 2 reviews)

Reviewed by 2 customers

Sort by

Displaying reviews 1-2

Back to top

 
4.0

Looks great and it wont break the bank

By Emersumnice

from Verdigris Ok

Verified Buyer

Pros

  • Easy instructions
  • Free Shipping
  • Protects The Winch
  • Secure fit
  • Uses Oem Lights

Cons

  • Skid Plate Allignment

Best Uses

  • Adding Lights
  • Increasing Appearance
  • Off Road Recovery

Comments about Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes:

The winch plate comes with 4 studs attached and two larger bolts you bolt to the frame outside to the inside. On the passenger side the large bolt fit with no problem, the driver side however I had to enlarge the hole with a reamer. Locate the Vacuum pump on a 2012 where that mounts to the frame the hole in front of that needs to be enlarged. Do this before you install the winch plate. If you have problems locating this hole just allign the winch plate and you will see it.

  • Was this a gift?:
  • No

(1 of 1 customers found this review helpful)

 
4.0

Easy Installion

By Wild Bill

from Alameda CA.

Verified Reviewer

Pros

  • Easy Installation
  • Good Quality
  • Nice Finish

Cons

  • Vague directions

Best Uses

  • Better Protection
  • Winch Mounting

Comments about Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes:

I've had two JK's and a few different bumpers. The Atlas bumper is a very nice bumper with easy installation, it took me the better part of a Saturday, but I did it by myself. Great finish and good hardware.
There is some confusion regarding the vacuum pump relocation. On my 2013 Rubicon I did not need to relocate the pump. The base plate for the winch is notched in the pump area. Also you'll be asked to cut part of the frame rail. The direction were a bit vague and some of the pictures are not really helpful. The portion of frame they ask you to cut is the bottom corner of the horizontal frame across the front. You are only trimming the corners to allow the skid plate to sit flush against the horizontal front member of the the frame. The skid plate will still bolt on even if you do not trim the bit that hangs below the front member. The kit comes with a "bumperette" and although it doesn't say anything in my opinion this option is if you are using steel cable on your winch with rollers. The bumperette will give you added protect the rollers. I have rope so i left the bumperette off. If I didn't my rope would rub on the edges of the bumperette. Also the clevis mounts are very low which is the only thing i don't like about the bumper.

  • Was this a gift?:
  • No

Displaying reviews 1-2

Back to top

 

Questions & Answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

7 Questions | 7 Answers
Displaying questions 1-5Previous | Next »
  • Q:

    Will the smithy built X20-10k gen2 winch fit and bolt in drop opening without any modifications, and will factory driving lights fit in light openings, my jeep is a 2011 Sahara unlimited
    Asked on 6/6/2014 by Charlie from Corpus Christi, Texas

    1 answer

    • Staff Reviewer

      A:

      Hello Charlie, Yes this will work with that winch. It is a direct bolt on to the bumper. If you have anymore questions feel free to ask, Thank you.

      Answered on 6/6/2014 by JordanC extension833 from Ohio
  • Q:

    does this bumper only allow for smittybuilt winches or will it accomadate other brands of winches
    Asked on 6/6/2014 by nobody from mesa az

    1 answer

    • Staff Reviewer

      A:

      Hello,
      The Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes will fit most winches with a 10" x 4.5" bolt pattern. Please let us know if you have any other questions.
      Thanks!

      Answered on 6/6/2014 by Tom S. Ext. 876 from Ohio
  • Q:

    What size shackles does this take?
    Asked on 5/4/2014 by RadioDoug

    1 answer

    • Staff Reviewer

      A:

      Hello! The Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes allows for 3/4" D-rings!

      Answered on 5/4/2014 by Sara H. Ext 874 from Ohio
  • Q:

    How many lights can be mounted to the grill guard and what size?
    Asked on 1/4/2014 by Dennis from Meridian, MS

    1 answer

    • Staff Reviewer

      A:

      Dennis, this Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes has the provisions for you to mount 2 7" off road lights to the grille guard.

      Answered on 1/6/2014 by Jason L from Ohio
  • Q:

    How many lights can mounted on the grill guard and what size?
    Asked on 1/4/2014 by Dennis from Meridian, MS

    1 answer

    • Staff Reviewer

      A:

      Dennis, this Smittybilt XRC Atlas Front Bumper with Grill Guard and Fog Light Holes has the provisions to mount 2 7" off road lights.

      Answered on 1/6/2014 by Jason L from Ohio
Displaying questions 1-5Previous | Next »

Do you have a question about this product?