Jeep Parts Home » Jeep Brakes and Steering » Jeep Steering Kits » Heavy-Duty Tie Rod/Drag Link Kit

Heavy-Duty Tie Rod/Drag Link Kit

Rugged Ridge | Part Number: RUG18050.82
Help us ensure this part fits your vehicle Check Fitment
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
  • Rugged Ridge - Heavy-Duty Tie Rod/Drag Link Kit - Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited - 4WD.com
Part Number: RUG18050.82
  • Technical Details

    • Fits 1997 to 2006 TJ Wrangler, Rubicon and Unlimited
    • Fits 1984 to 2001 XJ Cherokee
    • Fits 1993 to 1998 ZJ Grand Cherokee
    • 1.25" OD SAE
    • .25" wall thickness
    • Complete kit

These Tie Rod Assemblies provide virtually 1-ton strength with factory tapered ends, so no modification is required. The tube is 1.25” OD SAE steel with .25” wall thickness. This is the perfect solution for preventing bent tie rod tubes from off roading with larger tires. Complete kits with dust shields, castle nuts, cotter pins, jamb nuts and zerk fittings.

Installation instructions are in PDF format. You will need Adobe Reader to view these files.
Download Instructions

Customer Reviews

Average Customer Review
1.5
 

not safe

1.0

By Chris

from South East Virg

 

Comments about Rugged RidgeHeavy-Duty Tie Rod/Drag Link Kit:

Tierod failed at connection to ball joint. Luckily I was in a parking lot and only manuvering to park. I also agree with the other reviewer in there is a lot of slop and the rolling "that is considered normal" is disturbing I am no engineer but I think the slop and rolling contributed to the failure. Mostly used on paved and mild forest roads. A few trips on the beach, never any extream wheeling

 

not what I expected

2.0

By Rick

from upstate NY

 

Comments about Rugged RidgeHeavy-Duty Tie Rod/Drag Link Kit:

This was an o.k set up for 31s but 33s bend and twist it hard. 35s break the TRE on the road, for the same money you can get an over the knuckle 1 ton joint set up. Live and learn

Back to top
 

Questions & Answers

  • Q:

    Are there any off set tie rod ends from another company that will fit these rods for a 05 unlimited Rubi?
Back to top