• Toll Free: (800) 555-3353
The Ultimate Last-Minute Gift - Instant Gift Certificates - Buy, Print, Give - Instantly

Jeep Parts Home » Jeep Body Parts, Roll Cages, and Jeep Frames » Jeep Roll Cages & Roll Bars » SRC Roll Cage Kit

SRC Roll Cage Kit

Smittybilt | Part Number: S/B76900
Help us ensure this part fits your vehicle Check Fitment
  • Technical Details

    • Fits 1997 to 2006 TJ Wrangler and Rubicon
    • 7-piece kit
    • Manufactured from 1020 .120 Wall DOM
    • Knuckle attaches using a unique pivot on one end
    • Grade 10 fasteners
    • Satin black powder coat finish
    • 5-year limited warranty
    • No drill installation
    • Works with all soft goods, factory and aftermarket tops
    • Front down bars have built-in tubular grab handles
    • Requires modification to factory roll bar covers

The all new reinforced cage kits come with everything you’ll need to strengthen your factory roll bar into a solid foundation if a roll over takes place. We start off with 1020 .120 Wall DOM tubing which is one of the strongest materials available. Each kit includes the new Knuckle System that attaches to the factory roll bar, using a unique pivot and fastening point on one end and grade 10 fasteners on the other. Making it one of the strongest and the most solid mounts available for your Jeep®. All of our cages were engineered to bolt-in and require no modifications to the vehicle to ensure a rock solid install while creating the strongest cage kit available. This item requires a $40 oversize fee for shipping.

Installation instructions are in PDF format. You will need Adobe Reader to view these files.
Download Instructions

Installation Type
Bolt In

Other Products You May Be Interested In

Customer Reviews

Average Customer Review


by PowerReviews
SmittybiltSRC Roll Cage Kit, 1997-2006 Jeep TJ Wrangler & Rubicon, 7-Piece

(based on 1 review)

Reviewed by 1 customer

Displaying review 1

Back to top

(4 of 4 customers found this review helpful)


worth the wait

By kheiland

from Kokomo IN

About Me Jeeper

Verified Buyer


  • Can Withstand Use


  • Wasnt Available At Time

Best Uses

  • Offroad

Comments about Smittybilt SRC Roll Cage Kit, 1997-2006 Jeep TJ Wrangler & Rubicon, 7-Piece:

Wasn't available at time of order but was worth the wait.Everything fit perfect and is very good quality.so if you want a bolt in cage this is a good value,and looks good too.I am happy with it.

Displaying review 1

Back to top


Questions & Answers

Do you have questions about this product?

get answers from real customers and in-house experts with AnswerBox.

10 Questions | 10 Answers
Displaying questions 1-5Previous | Next »
  • Q:

    Does the side bars that mount to the door extend to the main hoop or do they mount to the existing B pilar tubes above the doors?
    Asked on 12/29/2012 by Anonymous

    1 answer

    • Staff Reviewer


      There is a T-section that attaches to the top of the roll bar above the doors and back towards the main B-pillar. Also, a bar runs from the floor up to the factory bar above the door. Finally, there is a dash bar that goes between the two front bars on the driver and passenger side. I hope this information is helpful. Thanks!

      Answered on 12/31/2012 by Craig R. from Ohio
  • Q:

    Looking to put a half top on so I will be cutting the back section of bar off, will this suffice or am I headed to the steel yard to make my own?
    Asked on 10/6/2012 by Matt from Tiifin, OH

    1 answer

    • Staff Reviewer


      Hi Matt!
      This roll cage kit should work for the front section, but you'll have several parts of the kit left over if you remove the rear factory bars for your half-top project. Other than that, the front will work just as you expect it to.

      Answered on 10/8/2012 by Aaron S. from Ohio
  • Q:

    will this cage work with a hard top? Will the hard top need to be removed to install it?
    Asked on 5/29/2012 by Anonymous

    1 answer



      Hello! Yes. This Smittybilt XRC Roll Cage kit will work with your hardtop and yes you will have to remove the hardtop to install it. Thank you!

      Answered on 5/30/2012 by Bob H from Ohio
  • Q:

    Do the knuckles affect soft tops at all and how does the front part of the cage bolt into the body? Is there a straight bar that goes behind the dash and bolts into the floor or do the bars attach to the top the dash?
    Asked on 4/29/2012 by Papa Jack from Oahu, Hawaii

    1 answer

    • Staff Reviewer


      Hi Papa Jack!
      First of all, this top will still allow you to run your soft top. It won't cause any problems with raising or lowering the top. Secondly, The front part of the cage bolts to the 3 dash bolts along the side of the dash at the back of the door opening. Lastly, there is a straight dash bar, but it is above the dash, not behind it. It uses allen bolts in a clamp system to mount it to both a-pillars. If you have additional questions, give our sales staff a call and they can answer anything you'd like to know about this roll cage.

      Answered on 4/30/2012 by Aaron S. from 4WD
  • Q:

    Hello, Will this product work on the 2005 Unlimited (longer jeep) 2 door wrangler.. Thank you
    Asked on 4/26/2012 by Anonymous from Ohio, berea

    1 answer

    • Staff Reviewer


      Hello, I just checked the company 2005 Unlimited and this will fit without issue on your Jeep. Please let us know if you have any other questions. Thanks.

      Answered on 4/26/2012 by Jamey P. from 4WD
Displaying questions 1-5Previous | Next »

Do you have a question about this product?