Jeep Parts Home » Fabrication & Tools » Shock Towers » Front Coil-Over Shock Mounting Kit

GenRight Part FSM-2004 - Front Coil-Over Shock Mounting Kit
Scroll Right Scroll Left

Front Coil-Over Shock Mounting Kit

By GenRight

Part Number: G/RFSM-2004
  • Share

Overview

This is the Gen-Right "Premium" coilover shock mount kit for the Front or Rear of a Jeep TJ, LJ, YJ or CJ (Toyota, Suzuki, etc.) that is made in the popular "hoop" style which pushes the upper shock mount all the way up just under the hood. This will also allow you to run super long travel shocks and maintain a reasonable ride height and proper shock mounting for the best possible performance.

Our kit is designed to work with 2" diameter coilovers (of any brand) or 2.5" Air shocks in 12", 14" or 16" travel. This builder’s kit is the most universal on the market and can be cut and mounted in any position to best work with your particular Jeep's Engine & Suspension combination.

Additionally, the compact hoop size is ideal for fitting inside the inner fender well, INSIDE the engine compartment with just a small hole up through the top of the fender well for the shock to poke up through to the upper mount.

This is a great option when pushing your front axle forward (about 2+") to get to the Magic 100" wheel base!

This is a clean way to convert over (a leaf or coil spring vehicle) to coilover shocks and get that racing tubed out look!

For the TJ or LJ guys, this kit allows you cut off and remove all the factory upper spring mount/bump stop bucket from the frame. This is perfect for placing the shock in virtually the optimal position for dampening performance and articulation.

For you CJ or YJ guys who are not ready to convert the entire front end over to coilovers, this can also be a great way to upgrade just the upper shock mount and convert over to shock "hoops" from the ugly stock mounts and install longer travel shocks and still keep the leaf springs.

These mounts are made from heavy duty .120" thick wall tubing and include a crossbar to connect the two shock towers (over the engine) for maximum strength. This kit or the parts from this kit can also be modified and used on the rear for those guys looking to put coilovers on the rear.

NOTES: This kit requires cutting & welding. The kit also will require some minor cutting of inner fender well to accommodate your shock and location choice. Compatible with most small body lifts.

Technical Details

  • Universal
  • Welding required
  • 1-1/2 inch x .120 inch thick tubing
  • Bare steel
  • Includes cross bar to attach to hoops

Product Specs

Mounting LocationVehicle Location
UniversalFront

Customer Reviews

Average Customer Review
 

Questions & Answers